Facility Layout Relayout Using ARC, ARD, and Blocplan Methods to Optimize Material Handling Transfer
Relayout Tata Letak Fasilitas menggunakan Metode ARC, ARD, dan Blocplan guna Mengoptimalkan Perpindahan Material Handling
DOI:
https://doi.org/10.21070/ups.5067Keywords:
Facility Layout Design, Activity Relationship Chart, Activity Relationship Diagrams, BlocplanAbstract
CV. Tiga Karya Persada Indonesia is a company that focuses on steel processing services such as making canopies and fences. The layout here is considered not good, where in the fabrication area there are 3 different processes. From this incident, work errors often occur, and the material movement distance is also considered not optimal. The research aims to provide recommendations for a more optimal production layout for moving materials, as well as separating fabrication areas to minimize the occurrence of work process errors. The methods used are Activity Relationship Chart (ARC), Activity Relationship Diagram (ARD) and Blocplan. By using this method, a total reduction in material movement distance of 5 m was obtained, with an efficiency of 35.21%. Layout recommendations result in smaller material movement distances. Therefore, this proposed layout can be an alternative relayout facility layout for CV. Tiga Karya Persada Indonesia to be more optimal.
Downloads
References
M. Zainul, “Manajemen Operasional.” CV. BUDI UTAMA, Yogyakarta, 2019.
C. Casban and N. Nelfiyanti, “Analisis Tata Letak Fasilitas Produksi Dengan Metode Ftc Dan Arc Untuk Mengurangi Biaya Material Handling,” J. PASTI, vol. 13, no. 3, p. 262, 2020, doi: 10.22441/pasti.2019.v13i3.004.
Y. P. Darmawan, I. A. Puspita, and ..., “Perancangan Jadwal Pembuatan Rearcone Pesawat Nc212 Menggunakan Metode Critical Path Method (cpm) Pada Pt. Dirgantara Indonesia,” eProceedings, vol. 8, no. 5, pp. 7539–7545, 2021, [Online]. Available: https://openlibrarypublications.telkomuniversity.ac.id/index.php/engineering/article/view/16450%0Ahttps://openlibrarypublications.telkomuniversity.ac.id/index.php/engineering/article/view/16450/16161
F. N. A. Panjaitan, Felix Yohannes, “1 , 2 1,2,” vol. 8, no. June, pp. 30–38, 2020.
M. R. Rosyidi, “Analisa Tata Letak Fasilitas Produksi Dengan Metode Arc, Ard, Dan Aad Di Pt. Xyz,” WAKTU J. Tek. UNIPA, vol. 16, no. 1, pp. 82–95, 2018, doi: 10.36456/waktu.v16i1.1493.
S. Aji, “Implementasi Arc Dan Ard Untuk Menurunkan Omh Pada Desain Ulang Tata Letak Fasilitas Laboratorium,” Ind. Xplore, vol. 7, no. 1, pp. 125–131, 2022, doi: 10.36805/teknikindustri.v7i1.2110.
A. udin nouval Nouval, “Relayout tata letak fasilitas (studi kasus pabrik kerupuk terbaik di surabaya),” WAKTU J. Tek. UNIPA, vol. 21, no. 02, pp. 9–14, 2023, doi: 10.36456/waktu.v21i02.7147.
R. A. Simanjuntak, E. W. Asih, and F. Winardi, “Usulan Perbaikan Tata Letak Fasilitas Produksi Kayu Olahan Menggunakan Metode Activity Relationship Chart, Craft Dan From To Chart,” no. November, pp. 10–17, 2022.
A. Baihaqi, D. P. Rahmawati, L. A. Syukur, and O. Tita, “SAINS: Jurnal Manajemen dan Bisnis p-ISSN 1978-2241, e-ISSN 2541-1047 http://jurnal.untirta.ac.id/index.php/jsm,” 1978.
N. M. Faiz and A. Sugiyono, “Usulan Perbaikan Tata Letak Fasilitas PT. Promanufacture Indonesia Menggunakan Aplikasi Blocplan,” Pros. Konstelasi Ilm., vol. 7, no. Kimu 7, pp. 210–222, 2022, [Online]. Available: http://lppm-unissula.com/jurnal.unissula.ac.id/index.php/kimueng/article/view/20569
L. Moh.Samsudin, V. M. Afma, and A. Purbasari, “Perancangan Ulang Tata Letak Pabrik Jamur Tiram Menggunakan Metode Activity Relationship Chart Untuk Meningkatkan Produktivitas,” Profesiensi, vol. 2, no. 1, pp. 19–27, 2014.
S. Wignjosoebroto, Tata Letak Pabrik dan Pemindahan Bahan, Keempat. 2009.
E. W. Rokhmani, F. Desiyanto, and I. Harsadi, “Perencanaan Tata Letak Fasilitas Mesin Produksi Menggunakan Metode Activity Relationship Chart(Arc) Di CV. Yasri Cipta Mandiri,” Unistek, vol. 8, no. 2, pp. 107–112, 2021, doi: 10.33592/unistek.v8i2.1503.
“REF14_N. Fithri Azizah, R. Agil Apriani, F. P. Mahardika, M. A. Zikra Zizo, F. Aji Pradana, and A. Azz.pdf.”
I. Pratiwi, E. Muslimah, and D. A. Wahab Aqil, “Perancangan Tata Letak Fasilitas di Industri Tahu Menggunakan Blocplan MENGGUNAKAN BLOCPLAN,” J. Ilm. Tek. Ind., vol. 11, no. 2, pp. 102–112, 2012.
A. F. Islaha and A. S. Cahyana, “Upaya Peningkatan Produktivitas Dengan Meminimasi Waste Menggunakan From To Chart (FTC),” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 1, no. 2, pp. 107–115, 2017, doi: 10.21070/prozima.v1i2.1289.
Jamalludin, A. Fauzi, and H. Ramadhan, “Metode Activity Relationship Chart (Arc) Untuk Analisis Perencanaan Tata Letak Fasilitas Pada Bengkel Nusantara Depok,” Bull. Appl. Ind. Eng. Theory, vol. 1, no. 2, pp. 20–22, 2020.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
