Experimental Study of Friction Stir Welding on Ductility in Material AA6061-T651
Studi Eksperimental Friction Stir Welding Terhadap Keuletan Pada Material AA6061-T651
DOI:
https://doi.org/10.21070/ups.5066Keywords:
Friction Stir Welding, AA6061, Bending Test, TaguchiAbstract
Friction Stir Welding is a semi-conductor welding system used to join aluminum, and other alloy metals. This study is to determine the ductility of AA 6061 Aluminum material which has gone through the welding process with the Friction Stir Welding Technique. The test used is the Bend test using the ANOVA analysis taguchi method. Using the process parameters of tool rotation speed 765, 1208, 1907, 3022 (rpm), tool rotation speed 24, 43, 65, 90 (mm/min), tool tilt angle 2, 2.5, 3, 3.5 (°), and concave shoulder angle 2, 5, 8, 11 (°). As follows, the results of the ANOVA test on the FSW Process parameters contributed N by 34.40%, WS contributed 1.93%, TL contributed 6.76% and SBC contributed 23.56%. The results of the ANOVA test show that the FSW process parameters have a major role in contributing to the FSW process, namely Tool Rotation Speed and Welding Speed.
Downloads
References
M. M. Z. Ahmed, K. Touileb, M. M. El-Sayed Seleman, I. Albaijan, and M. I. A. Habba, “Bobbin Tool Friction Stir Welding of Aluminum: Parameters Optimization Using Taguchi Experimental Design,” Materials (Basel)., vol. 15, no. 8, 2022, doi: 10.3390/ma15082771.
G. Gebreamlak and B. Singh, “Friction Stir Welding and its Applications: A Review,” Nov. 2020.
U. Muhammadiyah Mataram Mataram, M. Hariz Dedy Sayogi, and M. Nur Sasongko, “Seminar Nasional LPPM UMMAT Analisis Temperatur Retreating Side dan Advencing Side Sambungan Las Friction Stir Welding AA 6061 Pada Perbedaan Suhu Awal,” vol. 2, no. April, pp. 633–639, 2023.
N. R. Y. Liara, S. Jokosiswor, and Untung Budiarto, “Analisa Sifat Mekanik Pengelasan GMAW ( Gas Metal Arc Welding) Alumunium 6061 dengan Variasi Holding Time pada Proses Normalizing,” J. Tek. Perkapalan, vol. 10, no. 2, pp. 1–9, 2022.
J. Hasil, K. Ilmiah, A. Isworo, U. Budiarto, and A. W. Budi, “JURNAL TEKNIK PERKAPALAN Analisis Perbandingan Kekuatan Impak, Tarik, Tekuk dan Mikrografi Pada Aluminium 6061 Pasca Pengelasan Tungsten Inert Gas (TIG) dengan Media Pendingin Air Laut, Air Tawar dan Udara,” J. Tek. Perkapalan, vol. 8, no. 3, 2020, [Online]. Available: https://ejournal3.undip.ac.id/index.php/naval
H. Saputra, M. Ivanto, and G. S. Lubis, “Pengaruh hasil pengelasan model SMAW terhadap kekuatan tarik baja ST 37 dan ASTM A36,” JTRAIN J. Teknol. Rekayasa Tek. Mesin, vol. 4, no. 1, pp. 55–64, 2023, [Online]. Available: https://jurnal.untan.ac.id/index.php/jtm/article/view/62930/75676596455
D. F. Rahmadan, “Confirmation Experiment Of Friction Stir Welding Process On Aluminum Alloy Aa 6061-T651 On Impact Strength And Vickers Hardness [ Eksperimen Konfirmasi Proses Friction Stir Welding Pada Material Aluminium Alloy Aa 6061-T651 Terhadap Kekuatan Impact Dan Ha,” pp. 1–16.
I. Iswanto, N. Noerdianto, A. Fachruddin, and M. Mulyadi, “Analisa perbandingan kekuatan hasil pengelasan TIG dan pengelasan MIG pada Aluminium 5083,” Turbo J. Progr. Stud. Tek. Mesin, vol. 9, no. 1, pp. 87–92, 2020, doi: 10.24127/trb.v9i1.1166.
S. Aws et al., “5 Veronika , Rika , dkk ; Pengaruh Parameter Pengelasan Terhadap Hasil Uji Bending Dengan Standar Aws Pada Baja ASTM A36 6 Veronika , Rika , dkk ; Pengaruh Parameter Pengelasan Terhadap Hasil Uji Bending Dengan Standar Aws Pada Baja ASTM A36,” vol. 9, no. 2, pp. 5–14, 2023.
A. Wahjudi, A. Sigit, and I. M. Londen, “A study of concave shoulder angle on the mechanical properties and fractography of friction stir welded AA6061-T651 joints,” J. Mater. Res. Technol., vol. 28, no. November 2023, pp. 78–86, 2024, doi: 10.1016/j.jmrt.2023.11.258.
Mulyadi, R. Firdaus, and R. S. Untari, “Optimization of Friction Stir Welding Parameters for AA6061-T651 Aluminum Alloy: Defect Analysis and Process Improvement,” Acad. Open, vol. 8, no. 1, pp. 1–13, 2023, doi: 10.21070/acopen.8.2023.6665.
A. H. Kurnianto and Y. Yunus, “Pengaruh Variasi Beban Penekanan Pada Pengelasan Gesek (Friction Welding) S45C Terhadap Kekuatan Bending Dan Bentuk …,” J. Tek. Mesin, pp. 161–164, 2023, [Online]. Available: https://ejournal.unesa.ac.id/index.php/jtm-unesa/article/view/56662%0Ahttps://ejournal.unesa.ac.id/index.php/jtm-unesa/article/view/56662/44510
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
