A Design of a Burner Stove Fueled by Used Oil and Used Cooking Oil
Perancangan Kompor Burner Berbahan Bakar Oli Bekas dan Minyak Jelantah
DOI:
https://doi.org/10.21070/ups.4935Keywords:
Stove burner design, used oil, used cooking oil, Design For Assembly (DFA)Abstract
This research aims to develop a burner stove design that uses used oil and used cooking oil as alternative fuel to replace LPG gas stoves. This initiative is driven by the need for renewable energy sources and the utilization of used oil waste and used cooking oil, amidst increasing dependence on petroleum. Using SolidWorks 2018 software, this stove design was designed to achieve optimization and ergonomics. The stove burner design concept was evaluated based on ease of manufacture, operation and assembly efficiency using the Design For Assembly (DFA) analysis method, which showed that concept A had an assembly time of 160.96 seconds and a design efficiency of 0.09%. The simulation results of frame strength in concept design A show a maximum stress of 5,539 MPa, maximum deflection of 2,578 MPa, and a safety factor of 4.51>1, indicating that this design is safe to use.
Downloads
References
A. Kusnadi, R. Djafar, and M. Mustofa, “Pemanfaatan Oli Bekas Sebagai Bahan Bakar Alternatif Kompor Yang Ramah Lingkungan,” J. Teknol. Pertan. Gorontalo, vol. 5, no. 2, pp. 49–55, 2020, doi: 10.30869/jtpg.v5i2.681.
I. N. Suparta, “Daur ulang oli bekas menjadi bahan bakar diesel dengan proses pemurnian menggunakan media asam sulfat dan natrium hidroksida,” Log. J. Ranc. Bangun dan Teknol., vol. 17, no. 1, pp. 73–79, 2017, [Online]. Available: https://ojs.pnb.ac.id/index.php/LOGIC/article/view/509
N. J. Habibie, “Abst Abs tr a c t,” pp. 97–104, 2000.
J. S. Carpenter and D. Flockhart, “Flash points,” J. Clin. Oncol., vol. 25, no. 35, pp. 5546–5547, 2007, doi: 10.1200/JCO.2007.13.9444.
B. BAKAR CAIR DENGAN PERLAKUAN PANAS YANG KONSTAN Azharuddin et al., “Proses Pengolahan Limbah B3 (Oli Bekas) Menjadi,” J. Austenit, vol. 12, no. 2, pp. 48–53, 2020.
A. F. Ramdja, L. Febrina, and D. Krisdianto, “Ampas Tebu Sebagai Adsorben,” J. Tek. Kim., vol. 17, pp. 7–14, 2019.
M. Taufik and H. Seftiono, “Karakteristik Fisik dan Kimia Minyak Goreng Sawit Hasil Proses Penggorengan dengan Metode Deep-Fat Frying,” J. Teknol., vol. 10, no. 2, pp. 123–130, 2018.
A. Setyo Nugroho, A. Teguh Rahayu, N. Andreas Rubiandana, T. Mesin, and S. Warga Surakarta, “Studi Eksperimental Diameter Nozzle Terhadap Kualitas Api Kompor Berbahan Bakar Limbah Cair,” vol. 5, no. 1, pp. 22–31, 2022, [Online]. Available: http://journal.ummat.ac.id/index.php/justek
W. Kurniawan, A. Saidah, P. Studi, and T. Mesin, “JURNAL KAJIAN TEKNIK MESIN Vol .. No … Hal,” pp. 1–11, 2022.
A. Statik, S. Frame, D. Sepeda, R. Tiga, and P. Pasca, “Static Analysis of Frame Structure of Post-Stroke Patients Tricycle Design with Material Type Variations,” vol. 4, no. 2.
“RANCANG BANGUN ALAT UJI HEAD LOSSES DENGAN VARIASI DEBIT DAN JARAK ELBOW 90 O UNTUK SISTEM PERPIPAAN YANG,” vol. 7, no. 1, pp. 32–35, 2018.
D. Handayani and U. Ningsih, “Computer Aided Design / Computer Aided Manufactur [ CAD / CAM ] proses Siklus hidup Manajemen Produksi yang meliputi perangkat lunak dan,” vol. X, no. 3, pp. 143–149, 2005.
L. Nucci, D. Narvaez, and T. Krettenauer, “Second Edition Second Edition,” Dairy Sci. Technol. CRC Taylor Fr. Gr., no. June, pp. 1–542, 2014.
widi widayat Briyartendra, “Jurnal Inovasi Mesin,” vol. 4, no. 2, pp. 2–7, 2019.
E. L. N and A. Suryadi, “PAKAIAN SECARA MANUAL DENGAN METODE DESIGN FOR ASSEMBLY ( DFA ),” vol. 01, no. 05, pp. 156–167, 2020.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
