Effect of Number of Impeller Blades on Water Flow and Pressure in Pump Prototypes
Pengaruh Jumlah Sudu Impeller Terhadap Debit dan Tekanan Air pada Prototipe Pompa
DOI:
https://doi.org/10.21070/ups.4868Keywords:
water pump, debit, impeller design, pressureAbstract
The world is experiencing a water crisis and extreme climate changes due to high global warming, marked by natural disasters, prolonged droughts, wildfires, and the lack of clean water in remote villages. Some issues are addressed by finding clean water using water pumps. A pump is a fluid transfer device, where pressure is the force affecting its performance, encompassing area, temperature, and volume. Water flow rate is the capacity of water flowing in a specific unit. This quantitative research involves data analysis after data collection. The study aims to determine which impeller blade number produces the highest flow rate and pressure. Tests were conducted on different impeller designs. The results showed that impeller 3, with 8 blades, produced higher flow rates and pressures compared to impellers 1 and 2.
Downloads
References
R. Candra, “Perancangan Pompa Sentrifugal Dan Diameter Luar Impeller Untuk Kebutuhan Air Kapasitas 60 Lpm Di Gedung F Dan D Universitas Muhammadiyah Tangerang,” J. Tek. Univ. Muhammadiyah Tangerang, vol. 7, no. 1, pp. 15–25, 2018.
W. H. Yahya and M. Mulyadi, “Panduan Praktik Terbaik Pemeliharaan Pompa Sentrifugal,” Procedia Eng. Life Sci., vol. 7, pp. 151–155, 2024, doi: 10.21070/pels.v7i0.1565.
E. P. Putro, E. Widodo, A. Fahruddin, and Iswanto, “Analisis head pompa sentrifugal pada rangkaian seri dan paralel,” Media Mesin Maj. Tek. Mesin, vol. 21, no. 2, pp. 46–56, 2020.
F. Riyanto, A. Fahruddin, and E. T. Belo, “Pengaruh Variasi Bentuk Impeller Terhadap Debit dan Tekanan Air pada Prototipe Pompa,” vol. 212476, no. 1, 2023.
P. Nikosai and I. S. Arief, “Optimasi Desain Impeller Pompa Sentrifugal Menggunakan Pendekatan CFD,” J. Sains dan Seni ITS, vol. 4, no. 2, pp. 6–11, 2015.
Agus Kurniawan, berlin saragih, hasballah, “Analisa Perancangan Mesin Pompa Air Dangkal Untuk Kebutuhan Skala Rumah Tangga” Vol 2, No 2, (2021) Desember 17-21
Rifqi firmansyah, bobie suhendra “Analisa Pengaruh Bentuk Impeller Terhadap Performa Pompa Sentrifugal Double Suction Type Venus 1-900.1000” Vol.6, No.2 Agustus 2018
Antonius Edy Kristiyono, Monika Retno Gunarti, “Pengaruh Jumlah Sudu Sentrifugal Impeller Terhadap Kapasitas Dan Efisiensi Pompa Sentrifugal” Vol. 3, No.1, Juni 2018
Eka Febriyanti, Sutarjo, Khairul Anwar, “Analisis Kegagalan Impeller Penyebab Kerusakan Pompa Air Kapal Laut” P-ISSN 1410-3680 / E-ISSN 2541-1233, M.P.I. Vol 11 No. 2, Agustus 2017 - (85 - 94)[1] W. H. Yahya and M. Mulyadi, “Panduan Praktik Terbaik Pemeliharaan Pompa Sentrifugal,” Procedia Eng. Life Sci., vol. 7, pp. 151–155, 2024, doi: 10.21070/pels.v7i0.1565.
E. Widodo and R. Dwi Jayanto, “Perencanaan Manufaktur Instalasi Pompa Sentrifugal Laboratorium Teknik Mesin Dengan Kombinasi Rangkaian Seri dan Paralel,” R.E.M. (Rekayasa Energi Manufaktur) J., vol. 6, no. 1, pp. 33–40, 2021, doi: 10.21070/r.e.m.v6i1.1547.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
