Analysis of the Influence of Hot Press Machine Parameters on Rubber Seal Quality Using the Taguchi Method
Analisa Pengaruh Parameter Mesin Hot Press Pada Kualitas Rubber Seal Menggunakan Metode Taguchi
DOI:
https://doi.org/10.21070/ups.4855Keywords:
Parameter, Rubber Seal, TaguchiAbstract
Rubber can be used to make seal products. To make these products it cannot be done haphazardly, you also need to pay attention to several parameters when making rubber seals. Making this rubber seal requires a tool in the form of a hot press machine. The hot press machine parameters consist of temperature, time and pressure. The aim of this research is to propose the Taguchi method with L27 experimental design and ANOVA to analyze the influence of hot press machine parameters such as temperature, pressing time and pressure on the hot press machine as well as to determine the quality level (size) of rubber seal products and to determine the variables that has made a major contribution to the manufacture of rubber seals. This research used temperatures of 100ºC, 130ºC, 150ºC, pressing times of 3, 5, 8 minutes and used pressures of 2 psi, 3 psi, 4 psi.
Downloads
References
Syaiful, M. Daffa Rizqullah, dan Dede Nugraha, “Pengaruh temperatur dan waktu vulkanisasi pada pembuatan sol karet dengan memanfaatkan arang aktif tempurung kelapa,” J. Tek. Kim., vol. 24, no. 2, hal. 56–62, 2018, doi: 10.36706/jtk.v24i2.432.
M. Y. Rambe, K. Rizal, N. E. Mustamu, dan Y. Sepriani, “Analisis Pengolahan Lateks Karet di PT. PP. London Sumatra (LONSUM), Tbk Sei Rumbia, Labuhanbatu Selatan, Indonesia,” Agro Bali Agric. J., vol. 5, no. 2, hal. 349–357, 2022, doi: 10.37637/ab.v5i2.963.
V. T. P. Sidabutar, “Untuk Pembuatan Seal / O-Ring Untuk Suku Cadang,” 2014.
R. B. Riset, D. Standardisasi, dan I. Palembang, “Karakteristik Karet Perapat Pada Katup Tabung Lpg Menggunakan Bahan Pengisi Dari Pasir Kuarsa Characteristics of Rubber Seal on the Lpg Cylinder Valve Using Filler From Quartz Sand,” Jur nal Di namika Peneli tian Ind. i, vol. 27, no. 2, hal. 103–109, 2016.
T. Prasetyo, P. Widodo, H. Juni Risma Saragih, P. Suwarno, dan B. Djoko Said, “Optimalisasi Perawatan Rubber Seal Tutup Palka Guna Melancarkan Proses Kegiatan Bongkar Muat Agar Terciptanya Keselamatan Pelayaran di MV. Tanto Terima,” J. Kewarganegaraan, vol. 7, no. 1, hal. 296–307, 2023, [Daring]. Tersedia pada: https://journal.upy.ac.id/index.php/pkn/article/view/4766.
M. Muharom dan S. Siswadi, “Desain Eksperimen Taguchi Untuk Meningkatkan Kualitas Batu Bata Berbahan Baku Tanah Liat,” J. Eng. Manag. Industial Syst., vol. 3, no. 1, hal. 43–46, 2015, doi: 10.21776/ub.jemis.2015.003.01.7.
F. Hidayat, “Optimasi Proses Pres Panas Pembuatan Wire Harness untuk meningkatkan Aspek QCD menggunakan Metoda Taguchi,” Teknobiz, vol. 2, no. 2, hal. 78–84, 2012.
P. R. Maulidia, E. Adriantantri, dan N. Budiharti, “Analisis Pengendalian Kualitas Menggunakan Metode Taguchi Pada Umkm Rubber Seal Rm Products Genuine Parts Sukun, Malang,” Ind. Inov. J. Tek. Ind., vol. 10, no. 2, hal. 82–91, 2020, doi: 10.36040/industri.v10i2.2823.
T. M. Sitorus, A. F. Sari, dan S. Supandi, “Usulan Perbaikan Kualitas Defect pada Proses Seal di Bagian Solid Quarter (Studi Kasus Perusahaan Automotive Rubber),” J. PASTI, vol. 14, no. 2, hal. 193, 2020, doi: 10.22441/pasti.2020.v14i2.009.
A. J. P. Perdana, A. Rijanto, dan D. N. Zulfika, “Pengaruh Seal Terhadap Tekanan Hidrolis di PT. Kepuh Kencana Arum Mojokerto, Jawa Timur,” Majamecha, vol. 1, no. 2, hal. 144–155, 2019, doi: 10.36815/majamecha.v1i2.560.
S. Bahri, T. Susanto, B. Riset, D. Standardisasi, dan I. Palembang, “the Effect of Nitrile Butadiene Rubber (Nbr) on Engine Mounting Quality,” Februari, hal. 1–7, 2013.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
