Preprint has been published in a journal as an article
Preprint / Version 1

Influence of Process Parameters on the Quality of Underwater Friction Stir Welding (UFSW) Joint in AA6005-T6 Series Aluminium Penetration and Porosity Study


Pengaruh Parameter Proses terhadap Kualitas Sambungan Underwater Friction Stir Welding (UFSW) pada Aluminium Seri AA6005-T6 Studi Penetrasi dan Porositas

##article.authors##

  • Dimas Dwi Prastio Universitas Muhammadiyah Sidoarjo (https://ror.org/017hvgd88)
  • Mulyadi Mulyadi Universitas Muhammadiyah Sidoarjo (https://ror.org/017hvgd88) https://orcid.org/0000-0003-3395-3871

DOI:

https://doi.org/10.21070/ups.4604

Keywords:

friction stir welding, underwater friction stir welding, aluminum AA6005-T6, process parameters, joint quality, penetration, porosity

Abstract

Friction stir welding (FSW) is a non-fusion welding technique that is effectively used to join metals, especially in underwater applications. This research aims to investigate the influence of process parameters on the quality of Underwater Friction Stir Welding (UWFSW) connections in AA6005-T6 series aluminum, with a focus on penetration and porosity studies. Joint testing is carried out using microstructure tests and porosity tests. The method used is the UWFSW experimental method for studying joint penetration and porosity. The results of this research based on the Penetrant Test showed an indication of porosity with a length of 6 mm and a width of 4 mm, and the results of the penetration test using a micro structure showed a penetration gap distance of 0.614 mm.

Downloads

Download data is not yet available.

References

I. H. Kosasi, J. T. Mesin, F. Teknik, U. Wahid, and H. Semarang, “Pengaruh Kecepatan Putar Tool Milling…,” pp. 30–34, 2012.

T. Endramawan, E. Haris, F. Dionisius, and Y. Prinka, “Aplikasi Non Destructive Test Penetrant Testing (Ndt-Pt) Untuk Analisis Hasil Pengelasan Smaw 3G Butt Joint,” JTT (Jurnal Teknol. Ter., vol. 3, no. 2, pp. 44–48, 2017, doi: 10.31884/jtt.v3i2.61.

I. Sukamana, “Pengaruh Kecepatan Tool Pada Dissimilar Metal Aluminium 1100 Dan 5052 Terhadap Kualitas Hasil Pengelasan Dengan Metode Las Gesek Puntir (Friction Stir Welding),” Mach. J. Tek. Mesin, vol. 6, no. 2, pp. 29–35, 2020, doi: 10.33019/jm.v6i2.1184.

T. Tarmizi, F. O. Wijaya, and I. Irfan, “Pengaruh Variasi Diameter Tool Pin Pada Friction Stir Welding Terhadap Sifat Mekanik Dan Struktur Mikro Sambungan Aluminium 6061-T6,” Kapal J. Ilmu Pengetah. dan Teknol. Kelaut., vol. 16, no. 3, pp. 91–99, 2019, doi: 10.14710/kapal.v16i3.23280.

M. A. WAHID, Z. A. KHAN, and A. N. SIDDIQUEE, “Review on underwater friction stir welding: A variant of friction stir welding with great potential of improving joint properties,” Trans. Nonferrous Met. Soc. China (English Ed., vol. 28, no. 2, pp. 193–219, 2018, doi: 10.1016/S1003-6326(18)64653-9.

K. HUDA, “Studi Pengelasan Friction Stir Welding ( Fsw ) Pada Aluminium Aa2024 Dengan Baja Karbon Ss400 Menggunakan Variasi Feed rate,” 2018.

M. Mulyadi, R. Firdaus, I. Iswanto, and M. N. Rizki, “Pengaruh parameter proses friction stir welding dengan material aluminium alloy AA6061-T651 terhadap distorsi dan kekerasan,” Turbo J. Progr. Stud. Tek. Mesin, vol. 11, no. 2, pp. 169–176, 2022, doi: 10.24127/trb.v11i2.2171.

Nafrizal, Tarkono, and Sugiyanto, “Analisis Uji Destructive Dan Non Destructive Terhadap Hasil Sambungan Las V-Tunggal Baja AISI 1045,” J. Mech., vol. 2, no. 2, pp. 66–67, 2011.

M. F. Sidiq, B. Setiawan, and M. A. Shidiq, “Pengaruh Kecepatan Putar Pada Pengelasan Gesek Dissimiliar Aluminium,” vol. 14, no. 2, pp. 9–20, 2023.

T. Tarmizi, R. Indrawan, and I. Irfan, “Pengaruh Tool Rotation Speed Terhadap Sifat Mekanik Sambungan Aluminium Paduan 6061-T6 Pada Proses Friction Stir Welding,” Urania J. Ilm. Daur Bahan Bakar Nukl., vol. 25, no. 3, pp. 153–164, 2019, doi: 10.17146/urania.2019.25.3.5703.

H. Purwanto, “Evaluasi Laju Pengelasan terhadap Mikrostruktur Sambungan Aluminium 5052 dengan menggunakan Metode Friction Stir Welding,” JMPM (Jurnal Mater. dan Proses Manufaktur), vol. 6, no. 2, pp. 1–7, 2022, doi: 10.18196/jmpm.v6i2.15005.

U. Indonesia et al., “Universitas indonesia pengaruh perubahan parameter pemesinan terhadap sifat mekanik material ac4ch pada proses,” 2011.

K. Tim and A. Tim, “DANA RKAT FAKULTAS TEKNIK UNDIP TAHUN ANGGARAN 2022 JUDUL PENELITIAN STUDI AWAL PERCOBAAN UNDERWATER FRICTION WELDING TIM PENGUSUL FAKULTAS TEKNIK UNIVERSITAS DIPONEGORO,” no. Nim 21050118130081, 2022.

N. Kholis and H. Purwanto, “Analisis Hasil Double Side Friction Stir Welding pada Aluminium AA6061 dengan Penguat Serbuk Cu terhadap Struktur Mikro,” Suara Tek. J. Ilm., vol. 14, no. 1, p. 01, 2023, doi: 10.29406/stek.v14i1.5325.

R. A. Alfian Nur Firdaus, Nisa Nur Hayati, “Contents Welcoming speech Organizing committee List of article in prosiding i ii iii iv v,” J. Semin. Kim., vol. 3, 2018.

Downloads

Additional Files

Posted

2024-05-14

Categories

License

Copyright (c) 2024 UMSIDA Preprints Server

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.