Implementation of the Omron CP1E PLC on Continuous Automatic Plastic Shredding Machine Prototype
Implementasi PLC Omron CP1E Pada Prototype Mesin Pencacah Plastik Otomatis Berkelanjutan
DOI:
https://doi.org/10.21070/ups.4432Keywords:
plastic waste, PLC, induction motor, CX-OneAbstract
Currently, the industrial world cannot be separated from sheet plastic waste which is very difficult to decompose in the soil, so it needs to be recycled by crushing. Sheet plastic is processed through shredding using a plastic cutting machine. Most of the chopping machines in the industrial world still enter plastic waste using human power, with one motor component as a driving force. To solve the above problem by adding a blower motor and a puller using PWM which functions to pull the remaining plastic sheets which are then chopped by the grinder motor, the chopped results are moved by the blower motor to the chopped results. This research applies the RnD method with a focus on designing a continuous automatic plastic chopping machine, based on PLC using CX-One software. This research proves that the automatic plastic shredding machine can improve efficiency, work safety, and reduce production costs.
Downloads
References
A. Indriani, A. Mardian, N. Kholik, dan Y. Suhartini, “METAL: Jurnal Sistem Mekanik dan Termal Analisis tegangan pada struktur mesin pencacah plastik menggunakan metode elemen hingga (MEH) dan uji kerja mesin pencacah plastik,” vol. 5, no. 1, hal. 9–16, 2021.
R. Huzein, “Rancang Bangun Mesin Pencacah Plastik Jenis Pet (Polyethlene Terephtalate) Kapasitas 50 Kg/Jam,” J. Teknol. Mesin Uda, vol. 1, hal. 88–95, 2020.
Y. F. Silitonga, “Rancang Bangun Mesin Pencacah Plastik Jenis Pet Skala Industri Rumah Tangga (Home Industry),” Gorontalo J. Infrastruct. Sci. Eng., vol. 3, no. 2, hal. 7, 2021, doi: 10.32662/gojise.v3i2.1197.
J. H. Wong, M. J. H. Gan, B. L. Chua, M. Gakim, dan N. J. Siambun, “Shredder machine for plastic recycling: A review paper,” IOP Conf. Ser. Mater. Sci. Eng., vol. 1217, no. 1, hal. 012007, 2022, doi: 10.1088/1757-899x/1217/1/012007.
Y. S. Handayani, J. Haidi, dan A. Mardian, “Analisis Sistem Kelistrikan pada Beban Motor Mesin Pencacah Sampah Plastik,” J. List. Instrumentasi dan Elektron. Terap., vol. 2, no. 1, hal. 3–7, 2021, doi: 10.22146/juliet.v2i1.61278.
U. Wiralodra dan W. Java, “Design and control of an automatic cable- cutting machine with the implementation of a stepper control program using PLC Haris Prayogo,” vol. 14, hal. 1281–1291, 2023.
A. Setiawan, “Stirring System Design for Automatic Coffee,” Int. J. Robot. Control Syst., vol. 1, no. 3, hal. 390–401, 2021.
M. S. Azis, I. Sulistiyowati, A. Ahfas, dan I. Anshory, “Dust Cleaning System on Panel PET Preform Injection Machine BM500,” Procedia Eng. Life Sci., vol. 2, no. 2, hal. 0–6, 2022, doi: 10.21070/pels.v2i2.1277.
M. Lamatenggo, I. Wiranto, dan W. Ridwan, “Perancangan Balancing Robot Beroda Dua Dengan Metode Pengendali PID Berbasis Arduino Nano,” Jambura J. Electr. Electron. Eng., vol. 2, no. 2, hal. 39–43, 2020, doi: 10.37905/jjeee.v2i2.6906.
H. Priyandha dan D. A. R. Wati, “Perancangan Prototipe Sistem Kendali Otomatis Pada Pengering Pakaian Berbasis Air Heater,” Jambura J. Electr. Electron. Eng., vol. 5, no. 1, hal. 71–78, 2023, doi: 10.37905/jjeee.v5i1.17212.
P. P. Baja, “Analisis THD Tegangan pada Penggunaan Motor DC dalam Proses Penggilingan Baja 1,” vol. 07, no. 01, hal. 1–12, 2023.
M. . Afandy, A. A. Akbar, dan A. H. Mubarak, “Rancang Bangun Sistem Distribusi Grease Secara Otomatis Dengan Metode Penjadwalan,” Jambura J. Electr. Electron. Eng., vol. 5, no. 2, hal. 130–135, 2023, doi: 10.37905/jjeee.v5i2.17193.
M. Ismail, R. K. Abdullah, dan S. Abdussamad, “Tempat Sampah Pintar Berbasis Internet of Things (IoT) Dengan Sistem Teknologi Informasi,” Jambura J. Electr. Electron. Eng., vol. 3, no. 1, hal. 7–12, 2021, doi: 10.37905/jjeee.v3i1.8099.
T. Y. Candra dan T. Taali, “Sistem Pengendali Kecepatan Motor DC Penguatan Terpisah Berbeban dengan Teknik Kontrol PWM Berbasis Arduino,” JTEV (Jurnal Tek. Elektro dan Vokasional), vol. 6, no. 1, hal. 199, 2020, doi: 10.24036/jtev.v6i1.107877.
S. Yahya, S. W. Jadmiko, K. Wijayanto, dan A. R. A. Tahtawi, “Design and implementation of training module for control liquid level on tank using PID method based PLC,” IOP Conf. Ser. Mater. Sci. Eng., vol. 830, no. 3, 2020, doi: 10.1088/1757-899X/830/3/032065.
A. Haryawan, T. Nurhidayat, dan A. E. Prakoso, “Implementasi PLC Omron CP1E-E20SDR-A untuk Pengisian dan Penutupan Botol Otomatis,” vol. 21, no. 1, hal. 6–11, 2022.
Y. Yuliza, R. Muwardi, D. W. Pratama, M. H. Santoso, dan M. Yunita, “Modification of Control Oil Feeding with PLC Using Simulation Visual Basic and Neural Network Analysis,” J. Ilm. Tek. Elektro Komput. dan Inform., vol. 8, no. 1, hal. 38–50, 2022, doi: 10.26555/jiteki.v8i1.22336.
S. K. Sawidin, Y. R. Putung, A. P. Y. Waroh, dan T. Marsela, “Rancang Bangun Kontrol Pengolahan Gula Aren Dengan Programmable Logic Controller,” Jambura J. Electr. Electron. Eng., vol. 5, no. 2, hal. 179–184, 2023, doi: 10.37905/jjeee.v5i2.19839.
C. S. Murinda, I. Islahuddin, dan N. A, “Firm Value: Does Corporate Governance and Research & Development Investment Matter?,” J. Reviu Akunt. dan Keuang., vol. 11, no. 2, hal. 266–284, 2021, doi: 10.22219/jrak.v11i2.16786.
Okpatrioka, “Research And Development ( R & D ) Penelitian Yang Inovatif Dalam Pendidikan,” J. Pendidikan, Bhs. dan Budaya, vol. 1, no. 1, hal. 86–100, 2023.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
