Smart Relay-based Automatic Car Wheel Painting Programming
Pemrograman Pengecatan Velg Mobil Otomatis Berbasis Smart Relay
DOI:
https://doi.org/10.21070/ups.4284Keywords:
Automatic Painting, Car Wheel, Limit Switch, Smart Relay, Solenoid ValveAbstract
Enhancing painting efficiency is crucial for optimizing production time, demanding both precision and expertise. Addressing this necessity, the present study proposes an automation system employing smart relays to facilitate a swift and seamless painting process. Employing a research and development approach, the researchers conducted observations, designed and developed the automation system, performed comprehensive testing, and ultimately implemented the tool. The outcomes demonstrated that the automated painting system, regulated by a limit switch and two solenoid valves, achieved considerable time savings, with an average reduction of 3 seconds per painting cycle. Moreover, the automated process exhibited a notable reduction in paint consumption, with a decrease of 2 grams compared to the manual painting procedure. In summary, the developed tool effectively streamlines the painting process for car wheels, delivering substantial time and cost savings.
Downloads
References
S. Nurjanah and V. S. Hendrawan, “Menghitung Waktu Baku Proses Painting Dudukan Spion Mobil Truk Menggunakan Electrodeposition Painting,” jenius, vol. 2, no. 2, pp. 89–96, Nov. 2021, doi: 10.37373/jenius.v2i2.150.
M. Nur, H. Louis, and W. Wahyudi, “Rancang Bangun Timer Pencampuran Painting Pesawat Berbasis Mikrokontroler Promini,” JM3E, pp. 15–25, Jun. 2023, doi: 10.61220/micronic.v1i1.20233.
S. Wicaksono and Y. Chandra, “Rancang Bangun Sistem Informasi Mixing dan Formula Cat (Studi Kasus: CV. Aneka Warna),” J. Janitra Inform. Sis. Inf., vol. 1, no. 2, pp. 85–91, Oct. 2021, doi: 10.25008/janitra.v1i2.135.
H. Alam, M. Masri, and B. Hutabarat, “Simulasi Pengoperasian Kipas Angin Dengan Menggunakan Timer Zelio Logic,” JET (Journal of Electrical Technology), vol. 7, no. 3, pp. 132–136, Dec. 2022.
F. H. Sholichin, S. Syahrorini, and A. Wisaksono, “Design An Automatic Shuttlecock Output Device Using An Arduino Based Servo Motor,” CNAHPC, vol. 5, no. 2, pp. 472–481, Jul. 2023, doi: 10.47709/cnahpc.v5i2.2474.
A. W. Dani, F. Supegina, F. Sirait, Y. Yuliza, A. R. Gautama, and S. Attamimi, “Prototype Pretreatment Proses Pengecatan Part Motor Menggunakan Metode Logika Fuzzy Berbasis Internet Of Thing (IoT),” Jurnal Teknologi Elektro, vol. 14, no. 1, pp. 28–33, Feb. 2023, doi: 10.22441/jte.2023.v14i1.006.
R. Muhida, M. Riza , and M. I. Miranto, “Rancang Bangun Mesin Pengecat Otomatis Berbasis Arduino,” Jurnal Teknik Mesin Universitas Bandar Lampung, vol. 9, no. 1, 2021.
F. A. Aziz and R. D. Puriyanto, “Rancang Bangun Mesin Pengecat Otomatis Berbasis PLC CP1E NA20DR A,” Buletin Ilmiah Sarjana Teknik Elektro, vol. 1, no. 3, p. 118, Dec. 2019, doi: 10.12928/biste.v1i3.1050.
A. Benbatouche and B. Kadri, “Design and realization of low-cost solenoid valve remotely controlled, application in irrigation network,” Bulletin EEI, vol. 11, no. 3, pp. 1779–1788, Jun. 2022, doi: 10.11591/eei.v11i3.4123.
A. Suntoro, I. Shobari, M. Subchan, Z. E. Bagaskara, and W. N. Hidayat, “Disain Konsep Perangkat Uji-Banding Keandalan Antara Limit-Switch Menggunakan Metoda Mekanik dan Proximity Pada Komponen CRDM di Reaktor Kartini,” PRIMA - Aplikasi dan Rekayasa dalam Bidang Iptek Nuklir, vol. 18, no. 1, pp. 21–30, Jun. 2021.
R. Mustaqim, E. Ismiyah, and D. Widyaningrum, “Analisis Kegagalan Pada Proses Repair Komponen Alat Berat Di PT. Surabaya Steel Construction Works Dengan Metode FMEA,” JUSTI (Jurnal Sistem dan Teknik Industri), vol. 2, no. 4, pp. 610–619, Jul. 2022, doi: 10.30587/justicb.v2i4.4153.
P. Pujono, A. Setiawan, and D. Prabowo, “Rancang Bangun Mekanisme Pergerakan Conveyor Pada Mesin Sortir Sampah Kaleng dan Botol Plastik,” Bangun Rekaprima, vol. 6, no. 2, pp. 1–13, Oct. 2020, doi: 10.32497/bangunrekaprima.v6i2.2121.
T. A. Rahmandika and F. Eliza, “Perancangan Sistem Pencampuran Cat Berbasis Mikrokontroler,” JTEIN: Jurnal Teknik Elektro Indonesia, vol. 3, no. 1, pp. 209–222, Apr. 2022, doi: 10.24036/jtein.v3i1.235.
N. Surojudin, “Sistem Pakar Diagnosa Kerusakan Spray Gun Electrostatic Dengan Metode Forward Chaining Berbasis Web,” Jurnal SIGMA, vol. 8, no. 2, pp. 117–124, Mar. 2017, doi: 10.37366/sigma.v8i2.117.
S. Sugiyono, Metode Penelitian Kuantitatif, Kualitatif dan R & D. Bandung: Penerbit Alfabeta, 2015.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
