Tractor Paint Quality Control By Integrating The Six Sigma Method and Fail Mode And Effect Analysis (FMEA) PT. XYZ
Pengendalian Kualitas Cat Traktor Dengan Mengintegrasikan Metode Six Sigma dan Failure Mode And Effect Analysis (FMEA) PT. XYZ
DOI:
https://doi.org/10.21070/ups.4030Keywords:
Product Quality, Six Sigma, Failure Mode Effect AnalysisAbstract
PT. XYZ is a company engaged in assembling agricultural machinery, namely four-wheeled tractors. The aim of this research is to find out the main factors that cause defects in painting parts and make appropriate suggestions/improvements to reduce and prevent defects in the painting process. The method used is the Six Sigma method and the FMEA (Failure Mode Effect and Analysis) method. Six Sigma in technical methods is oriented towards a statistical approach to calculating product defects. The goal is to reduce process variance by eliminating defects that interfere with customer satisfaction. FMEA is a technical analysis which, if carried out correctly and at the right time, will provide great value in helping the decision making process. The research results show that the average DPMO value for tractor product production on weekdays from January 1 2023 to April 30 2023 is 107618.46 with an average sigma value of 2.74.
Downloads
References
R. D. Astuti and L. Lathifurahman, “Aplikasi Lean Six-Sigma Untuk Mengurangi Pemborosan Di Bagian Packaging Semen,” JISI J. Integr. Sist. Ind., vol. 7, no. 2, p. 143, 2020, doi: 10.24853/jisi.7.2.143-153.
S. M. Fitria and N. Novita, “Six Sigma Sebagai Strategi Bisnis Dalam Upaya Peningkatan Kualitas Produk,” Jati J. Akunt. Terap. Indones., vol. 3, no. 1, pp. 1–14, 2020, doi: 10.18196/jati.030121.
S. F. Fortunata, “INTEGRASI METODE SIX SIGMA KE DALAM PROGRAM PEMBELAJARAN TEACHING FACTORY SEBAGAI UPAYA PENINGKATAN MUTU PESERTA DIDIK di SMKN 3 MALANG,” J. Manaj. Pendidik., vol. 12, no. 01, pp. 21–32, 2021, doi: 10.21009/jmp.v12i01.11099.
V. Gaspersz, Lean six sigma for manufacturing and service industries. Jakarta: PT Gramedia pustaka utama, 2007.
H. dan Render, Manajemen Operasi, 9th ed. Jakarta: Salemba Empat, 2009.
A. R. Kurniawan and B. Prestianto, “Perencanaan Pengendalian Kualitas Produk Pakaian Bayi dengan Metode Six Sigma Pada CV. AGP,” Jemap, vol. 3, no. 1, pp. 95–115, 2020, doi: 10.24167/jemap.v3i1.2632.
S. Lestari and M. H. Junaidy, “Pengendalian Kualitas Produk Compound At-807 Di Plant Mixing Center Dengan Metode Six Sigma Pada Perusahaan Ban Di Jawa Barat,” J. Ind. Serv., vol. 5, no. 1, 2019, doi: 10.36055/jiss.v5i1.6510.
K. Muhammad, K. Winarso, and I. Lumintu, “Peningkatan Kualitas Produk dan Minimasi Pemborosan Dengan Mengunakan Pendekatan Six Sigma Pada Perusahaan Pakan Ternak,” J. Sains, Teknol. dan Ind., vol. 17, no. 2, p. 73, 2020, doi: 10.24014/sitekin.v17i2.9715.
J. Hutabarat, R. Triswanti, and R. Septiari, “Measurement of Sigma Level from Consumer Sound Side in Fried Oil Product,” IPTEK J. Proc. Ser., vol. 0, no. 1, p. 367, 2021, doi: 10.12962/j23546026.y2020i1.11361.
A. R. Andriansyah and W. Sulistyowati, “PENGENDALIAN KUALITAS PRODUK CLARISA MENGGUNAKAN METODE LEAN SIX SIGMA DAN METODE FMECA (Failure Mode And Effect Cricitality Analysis) (Studi Kasus : Pt. Maspion III),” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 4, no. 1, pp. 47–56, 2021, doi: 10.21070/prozima.v4i1.1272.
A. Pattiruhu, J. M. Tupan, and A. Tutuhatunewa, “Analisis Karakteristik Karbon Residu Dan Kandungan Sulfur Produk Minyak Biosolar Dengan Pendekatan Six Sigma,” Arika, vol. 14, no. 2, pp. 111–120, 2020, doi: 10.30598/arika.2020.14.2.111.
M. Sarisky Dwi Ellianto, P. Budi Santoso, and A. As’ad Sonief, “Usulan Penerapan Lean Six Sigma, Fmea Dan Fuzzy Untuk Meningkatkan Kualitas Produk Botol Sabun Cair,” J. Eng. Manag. Industial Syst., vol. 3, no. 1, pp. 28–34, 2015, doi: 10.21776/ub.jemis.2015.003.01.5.
R. Saputro, Winarni, and M. Yusuf, “Pendekatan Six Sigma, FMEA, Dan Kaizen Sebagai Upaya Peningkatan Perbaikan Kualitas Produksi Pengecoran Logam di PT. Mitra Rekatama Mandiri,” J. REKAVASI, vol. 4, no. 2, pp. 47–52, 2016.
F. Ismawan, L. Hakim, and F. Teknik, “Model Penentuan Quality Control Produksi Plate Menggunakan Metode Six Sigma dan Fuzzy FMEA (Studi Kasus Perusahaan Besi Plate),” Seinasi-Kesi, no. November, pp. 19–20, 2020.
K. Putra and J. Rahardjo, “Peningkatan On Time Picking di PT. X Cabang Surabaya dengan menggunakan Metode Filosofi Six Sigma,” J. Titra, vol. 8, no. 1, pp. 53–60, 2020, [Online]. Available: http://publication.petra.ac.id/index.php/teknik-industri/article/view/9861
M. S. H. Fidha Arvilta, “ANALISA PENGENDALIAN MUTU PRODUK CAT SOLVENT BASED DENGAN MENGGUNAKAN METODE SIX SIGMA,” Univ. Negeri Surabaya., pp. 1–11, 2019.
A. Trimarjoko, D. M. H. Fathurohman, and S. Suwandi, “Metode Value Stream Mapping dan Six Sigma untuk Perbaikan Kualitas Layanan Industri di Automotive Services Indonesia,” IJIEM - Indones. J. Ind. Eng. Manag., vol. 1, no. 2, p. 91, 2020, doi: 10.22441/ijiem.v1i2.8873.
H. P. I. Misrawi, Neva Satyahadewi, “SISTEM PENDUKUNG KEPUTUSAN DALAM PEMBELIAN RUMAH Yuksel dan Dagdeviren ( 2007 ) menjelaskan tahapan-tahapan yang harus dilakukan untuk mengerjakan ANP . Tahapan pertama yaitu konstruksi model dan penyusunan permasalahan . Bentuk permasalahan harus ditentu,” vol. 08, no. 3, pp. 579–588, 2019.
W. Waluyo, S. Sholihin, R. A. Permana, T. A. Firmanti, and Y. I. Permatasari, “Penerapan Metode Six Sigma dalam Pencegahan dan Pengendalian Infeksi di Rumah Sakit: A Systematic Review,” J. Penelit. Kesehat. “SUARA FORIKES” (Journal Heal. Res. “Forikes Voice”), vol. 11, no. 1, p. 108, 2019, doi: 10.33846/sf11123.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
