Production Plan Analysis in PT. ALP Petro Industry Through Goal Programming Method
Analisa Perencanaan Produksi pada PT. ALP Petro Industry Melalui Metode Goal Programming
DOI:
https://doi.org/10.21070/ups.3525Keywords:
Goal Programming Method, Double Exponential Smoothing Method, Triple Exponential Smoothing Method, Oil, ForecastingAbstract
PT. ALP Petro Industry frequently encountered with production planning problems. By looking at production data for the period January to December 2021, experienced fluctuations, which will cause swelling in production capacity, as well as a buildup of finished products in the finished product warehouse.The total product produced was 6390277.50 kg. This research aims to determine the results of the quantities that will be produced in the next 1 year period by creating a production planning model, so that production results and working time can be optimized. The methods used are the Double Exponential Smoothing Method, the Triple Exponential Smoothing Method and the Goal Programming Method assisted by LINGO software, with results obtained from forecasting results for the period January to December 2022 using the equation Ft+m = 12410,03 + 3,14(m) were 6922139,63 kg, with a total working time used of 98153 minutes or 1636 hours.
Downloads
References
R. Z. Putri and Fadhillah, “POil Angkatan Kualitas Batubara Low Calorie Menggunakan,” J. Bina Tambang, vol. 5, no. 2, pp. 208–217, 2018.
M. Salafudin, D. Darmanto, and T. Priangkoso, “Analisis Pengaruh Viskositas Pelumas Multi Grade Terhadap Karakter Pelumas,” J. Ilm. Momentum, vol. 16, no. 1, 2020, doi: 10.36499/mim.v16i1.3347.
P. Produksi, “Metode Goal Programming Berbasis QM for Windows dalam Optimasi Perencanaan Produksi,” J. Mipa, vol. 41, no. 1, pp. 6–12, 2018.
M. B. Soeltanong and C. Sasongko, “Perencanaan Produksi dan Pengendalian Persediaan pada Perusahaan Manufaktur,” J. Ris. Akunt. Perpajak., vol. 8, no. 01, pp. 14–27, 2021, doi: 10.35838/jrap.2021.008.01.02.
A. Lusiana and P. Yuliarty, “PENERAPAN METODE PERAMALAN (FORECASTING) PADA PERMINTAAN ATAP di PT X,” Ind. Inov. J. Tek. Ind., vol. 10, no. 1, pp. 11–20, 2020, doi: 10.36040/industri.v10i1.2530.
U. M. Fakultas, I. Komputer, and M. Azhari, “Perbandingan Metode Double Exponential Smoothing Dan Triple Exponential Smoothing Dalam Parameter Tingkat Error Mean Absolute Percentage Error (MAPE) dan Means Absolute Deviation (MAD) Alviani Krisma Putut Pamilih Widagdo Kata kunci-forecasting, Double Ex,” Pros. Semin. Nas. Ilmu Komput. dan Teknol. Inf., vol. 4, no. 2, pp. 81–87, 2019.
H. D. E. Sinaga, N. Irawati, and S. Informasi, “Perbandingan Double Moving Average Dengan Double Exponential Smoothing Pada Peramalan,” Jurteksi, vol. IV, no. 2, pp. 197–204, 2018.
D. M. Khairina, Y. Daniel, and P. P. Widagdo, “Comparison of double exponential smoothing and triple exponential smoothing methods in predicting income of local water company,” J. Phys. Conf. Ser., vol. 1943, no. 1, 2021, doi: 10.1088/1742-6596/1943/1/012102.
A. Muchayan, “Perbandingan Mean Average Percentage Error Pada Peramalan Pergerakan Harga Reksa Dana Menggunakan Metode Holt Dan Brown’S Double Exponential Smoothing,” e-NARODROID, vol. 6, no. 1, pp. 8–13, 2020, doi: 10.31090/narodroid.v6i1.1068.
Ramadiani, R. Syahrani, I. F. Astuti, and Azainil, “Forecasting the number of airplane passengers uses the double and the triple exponential smoothing method,” J. Phys. Conf. Ser., vol. 1524, no. 1, 2020, doi: 10.1088/1742-6596/1524/1/012051.
S. Prayudani, A. Hizriadi, Y. Y. Lase, Y. Fatmi, and Al-Khowarizmi, “Analysis Accuracy of Forecasting Measurement Technique on Random K-Nearest Neighbor (RKNN) Using MAPE and MSE,” J. Phys. Conf. Ser., vol. 1361, no. 1, 2019, doi: 10.1088/1742-6596/1361/1/012089.
D. Krissyda and T. Oktiarso, “Perencanaan Produksi Dengan Metode Goal Programming Pada UKM XYZ,” Matrik, vol. 22, no. 1, p. 15, 2021, doi: 10.30587/matrik.v22i1.1577.
S. Bahri, S. Meutia, J. T. Industri, F. Teknik, and U. Malikussaleh, “OPTIMASI PERENCANAAN PRODUKSI CRUMB RUBBER DENGAN METODE GOAL PROGRAMMING DI PT . BAKRIE SUMATERA PLANTATIONS TBK,” vol. 10, no. 1, 2021.
M. Y. Kabosu and kartiko, “Analisis Goal Programming ( Gp ) Pada Optimalisasi Perencanaan Produksi Mebel Ud . Latanza,” J. Stat. Ind. dan Komputasi, vol. 5, no. 1, pp. 22–40, 2020.
O. Perencanaan and P. Kayu, “Optimasi Perencanaan Produksi Kayu Lapis PT. XXX Menggunakan Metode Goal Programming,” J. Mipa, vol. 41, no. 1, pp. 13–19, 2018.
M. Agustina, P. M. Manajemen, K. Manajemen, S. Informasi, and U. B. Darma, “Menggunakan Pendekatan Model,” vol. 2, no. 3, pp. 234–244, 2021.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
