Effect of Quadrilateral and Triangular Mesh Models on Fsw Process Temperature
Pengaruh Model Mesh Segiempat dan Segitiga Terhadap Temperatur Proses Fsw
DOI:
https://doi.org/10.21070/ups.3485Keywords:
Heat Generation, Mesh, Transient ThermalAbstract
Meshing is the division of stress and pressure calculations. In this analysis uses 2 mesh shapes, namely rectangular mesh and triangular mesh to see the calculation rician, and uses 4 tools with Cilynder pin, Cilynder Tapper, Square Tapper, and Hexagonal. This study aims to determine the effect of rectangular and triangular mesh models on the temperature of the FSW process. This research uses the transient thermal method to study all heat generation parameters. In this study using process parameters tool rotation speed 80.11, 126.50, 199.70, 316.46 (rad/s), concave shoulder angle 2, 5, 8, 11 (0), tool tilt angle 2, 2.5, 3, 3.5 (0), and welding speed 24, 43, 65, 90 (mm/s). This research uses the standard optimal maximum temperature of 3150C according to Weis Olea, C. A. (2008).
Downloads
References
Weis Olea, C. A. (2008). Influence of Energy Input in Friction Stir Welding on Structure Evolution and Mechanical Behaviour of Precipitation-Hardening in Aluminium Alloys (AA2024-T351, AA6013-T6 and Al-Mg-Sc). Geesthacht: Von der Fakultät für Maschinenbau der Ruhr-Universität Bochum.
Durdanović, M.B., Mijajlović, M.M., Milčić, D.S., & Stamenković, D.S.: Heat generation during friction stir welding process. Tribology in Industry 31(1–2), 8– 14, 2009.
Mandal.,2005, “Aluminium welding”, 2 ed., Kharagpur, India.
Pujono, P. (2017). Perubahan Nilai Kekuatan Tarik Pada Hasil Pengelasan Friction Stir Welding Aluminium 2024-T3 Yang Menggunakan Perlakuan Transient Thermal. Bangun Rekaprima: Majalah Ilmiah Pengembangan Rekayasa, Sosial dan Humaniora, 3(1, April), 1-9.
Soleh, M. Z. A., & Mulyadi, M. (2021). Design and Build JIG Design on Friction Stir Welding Using Fillet Connection on AA6061-T6 Material. Indonesian Journal of Innovation Studies, 14, 10-21070.
Mulyadi, Mulyadi, et al. "The Influence of the Tool Concave Shoulder Angle on Heat Generation in the Stir Friction Welding Process with AA6061-T651 Materials." Key Engineering Materials 943 (2023): 55-61.
Downloads
Additional Files
Posted
Categories
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
