Risk Analysis of Manual Material Handling Using Recommended Weight Limit, Job Strain Index and Job Safety Analysis Method
Analisa Risiko Manual Material Handling Menggunakan Metode Recommended Weight Limit, Job Strain Index dan Job Safety Analysis
DOI:
https://doi.org/10.21070/ups.3327Keywords:
Manual Material Handling, Recommended Weight Limit, Job Strain Index, Job Safety AnalysisAbstract
PT IJA is an extruded aluminum producer, loading and unloading operator attendance data from January to March 2023 there are at least 2-4 workers or 18-36% of 11 people who do not come to work in 1 month due to complaints of illness. The weight of the lifted product is 25-43 kg with a total lifting weight per day of 70-80 tons, the frequency of lifting is 2 times per minute with a pedestal on the shoulder, based on the Regulation of the Minister of Manpower No. 5 of 2018 concerning K3 Work Environment classifies for these conditions the maximum load allowed is 11 kg. The Recommended Weight Limit method is used to determine the level of risk of unloading, Job Strain Index to determine the level of risk of loading and unloading work activities, and Job Safety Analysis to determine the potential for work accidents.
Downloads
References
A. Soleman and A. Priyadi, “Analisis Manual Material Handling Untuk Meminimalisir Terjadinya Musculoskeletal Disorder Pada Pekerja Tahu,” ALE Proceeding, vol. 3, pp. 56–64, 2020.
H. N. Marjani, W. Wiediartini, and M. Y. Santoso, “REDESIGN STASIUN KERJA DENGAN PERTIMBANGAN FAKTOR ERGONOMI DI WORKSHOP PLAT SAMBUNG PADA PEKERJA PENGANGKATAN PLAT (STUDI KASUS: PERUSAHAAN MANUFAKTUR PEMBUAT BETON),” in Conference on Safety Engineering and Its Application, 2018, pp. 479–484.
“01. Permen_5_2018”.
Tarwaka, Solichul HA. Bakri, and Lilik Sudiajeng, “Ergonomi untuk Keselamatan, Kesehatan Kerja dan Produktivitas,” in Ergonomi untuk Keselamatan, Kesehatan Kerja dan Produktivitas, 2004th ed.Surakarta: UNIBA PRESS, 2004.
M. M. Ulkhaq, “Penilaian Risiko Keselamatan Kerja Pada Proses Pembuatan Balok Jembatan Dengan Metode Job Safety Analysis (JSA),” Industrial Engineering Online Journal, vol. 6, no. 4, 2018.
M. F. Hidayah, “IDENTIFIKASI TINGKAT RISIKO BEBAN KERJA PADA PENGANGKATAN HASIL REBUSAN KEPITING DENGAN METODE RECOMMENDED WEIGHT LIMIT (RWL) DAN LIFTING INDEX (LI) PADA IKM MELATI MAKASSAR,” 2020.
M. Noviandy, “Analisis Pengangkatan Cpu Di Wm Game Center dengan Metode Recommended Weight Limit (Rwl) Dan Chaffin Anderson,” Jurnal Ilmiah Teknik Industri, vol. 7, no. 3, 2019.
R. A. Ratriwardhani, “Analisa Aktivitas Pengangkatan dengan Metode Recommended Weight Limit (RWL),” Medical Technology and Public Health Journal, vol. 3, no. 1, pp. 94–100, 2019.
T. Harini, “Analisis Perbaikan Prosedur Kerja Menggunakan Metode Nordic Body Map, Niosh Lifting Equation dan Job Safety Analysis di Pt Sahabat Mewah dan Makmur,” SIJIE Scientific Journal of Industrial Engineering, vol. 3, no. 1, pp. 1–7, 2022.
I. Y. Anggraini, M. Sulaiman, and A. A. Karim, “ANALISIS PENGANGKATAN BEBAN PADA PROSES PENCETAKAN TAHU MENGGUNAKAN METODE RECOMMENDED WEIGHT LIMIT (RWL) DI UMKM X KOTA BALIKPAPAN,” Journal of Industrial Innovation and Safety Engineering (JINSENG), vol. 1, no. 1, pp. 10–16, 2023.
N. Setiadi, E. Achiraeniwati, and Y. S. Rejeki, “Pengukuran Resiko Kerja pada Bagian Pengemasan Manual Menggunakan Metode Job Strain Index (JSI),” Prosiding Teknik Industri, pp. 247–252, 2019.
R. Patradhiani, B. Nopriansyah, and M. Hastarina, “Identifikasi Postur Kerja Pengrajin Batik Jumputan Dengan Metode Job Strain Index (JSI),” Journal of Industrial & Quality Engineering p-ISSN, vol. 2303, p. 2715, 2021.
A. Permana and A. J. Nugroho, “Job Safety Analysis (JSA) Pada Area Workshop PT Widya Inovasi Indonesia,” Jurnal Ilmiah Teknik Mesin, Elektro dan Komputer, vol. 2, no. 1, pp. 63–73, 2022.
B. P. Novitasari and S. Saptadi, “Analisis Risiko Kecelakaan Kerja Dengan Metode Job Safety Analysis Pada Dermaga Pelabuhan Dalam Pt. Pelabuhan Indonesia Iii Cabang Tanjung Emas,” Industrial Engineering Online Journal, vol. 7, no. 3, 2018.
N. Wisudawati and M. Djana, “Analisis Posisi Kerja Pada Proses Pencetakan Kerajinan Tembikar Menggunakan Metode Niosh,” Integrasi: Jurnal Ilmiah Teknik Industri, vol. 3, no. 1, pp. 26–34, 2018.
R. B. Jakaria and B. I. Putra, “Buku ajar mata kuliah psikologi industri,” Umsida Press, pp. 1–119, 2020.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
