Preprint has been submitted for publication in journal
Preprint / Version 1

Experimental Study On Sansivera Composite Fiber Treatment of Caoh2 (Calciun Hydroxide) as a Composite Reinforcement


Studi Eksperimental pada Serat Komposit Sansivera Terhadap Perlakuan Caoh2 (Kalsium Hidroksida) Sebagai Penguat Komposit

##article.authors##

DOI:

https://doi.org/10.21070/ups.3076

Keywords:

Sansivera, composite, Tensile Test

Abstract

This study aims to determine the effect of alkaline CaOH2 on fiber strength characteristics and the effect of fiber

treated with CaOH2 on composites. The methods used in this research are molding methods, composite manufacturing

methods, weight fraction manufacturing methods, tensile testing methods and experiments. The concentration of the

mixed CaOH compound used in this experiment was 4%, 7%, 10%, 13% and 15% by going through a 2-hour soaking

process so that sansivera fibers weighing 0.2 grams in each strand of fiber with the strength of the fiber tested would

come out produce each fiber has strength with different treatment. From the results of this experiment, there is an

influence on the strength value of the fiber received from the treatment of CaOH2 compounds, where CaOH2

compounds have little effect on fiber, while CaOH2 compounds have more, the effect received is better with a high percentage.

Downloads

Download data is not yet available.

References

D. C. Montgomery, “Design and Analysis of Experiments,” 2017.

P. Hapiz, P., Doyan, A., & Sedijani, “UJI MEKANIK MATERIAL KOMPOSIT SERAT PINANG,” J.

Penelit. Pendidik. IPA Sumba, vol. 4(2), 2019.

M. Murjito, “KAJIAN SERAT SANSEVIERIA TRIFASCIATA PRAIN SEBAGAI PENGUAT MATERIAL

KOMPOSIT. In Prosiding SENTRA (Seminar Teknologi dan Rekayasa)”.

dan T. Iskandar Fajri, Rahmat, & Sugiyanto, “STUDI SIFAT MEKANIK KOMPOSIT SERAT

SANSEVIERIA CYLINDRICA DENGAN VARIASI FRAKSI VOLUME BERMATRIK POLYESTER.,”

J. FEMA, vol. 1(2), 2013.

C. A. Priyandokohadi, S., & Rizeki, “Analisa Pengaruh Orientasi Arah Serat terhadap Kekuatan Tarik dan

Impact Material Komposit Serat Alam (Serat Agave dan Serat Sansivera).,” Mek. J. Tek. Mesin, vol. 4(01),

pp. 12-18.E, 2018.

E. W. Widodo, E. & Febrianto, “Analysis Of Sansevieria Fiber Composite With Naoh Alkalization.,”

Procedia Soc. Sci. Humanit., vol. 3, pp. 959–966, 2022.

I. M. Kastiawan and C. A. Rizeki, “Analisa Pengaruh Orientasi Arah Serat terhadap Kekuatan Tarik dan

Impact Material Komposit Serat Alam (Serat Agave dan Serat Sansivera),” Tek. Mesin, vol. 1, no. 2, 2018.

N. Laksono, A. D., Basyaruddin, & Adlina, “Pengaruh Perlakuan Alkalisasi Serat Alam KayuBangkirai

(Shorea Laevifolia Endert) Pada Sifat Mekanik Komposit Dengan Matriks Poliester.,” J. Sains Terap., vol.

(2), pp. 1–7, 2019.

S. Maryanti, B., Sonief, A. A. A., & Wahyudi, “Pengaruh alkalisasi komposit serat kelapa-poliester terhadap

kekuatan tarik.,” J. Rekayasa Mesin, vol. 2(2), pp. 123–129, 2011.

T. R. Surbakti, E. J., Sinuhaji, P., & Simbolon, “PEMBUATAN DAN KARAKTERISTIK KOMPOSIT

SERAT KULIT JAGUNG DENGAN MATRIKS EPOKSI,” Dep. Fis. FMIPA., 2013.

D. A. Kurniawan, “UNJUK KERJA TURBIN ANGIN PROPELLER 4 SUDU BERBAHAN KOMPOSIT

BERDIAMETER 100 CM, DENGAN LEBAR MAKSIMUM SUDU 13 CM PADA JARAK 19 CM DARI

PUSAT SUMBU POROS TUGAS. Tugas Akhir Jurusan Teknik Mesin.,” 2016, [Online]. Available:

http://biblioteca.ibge.gov.br/visualizacao/monografias/GEBIS - RJ/RBG/RBG 1995

v57_n1.pdf%0Ahttps://periodicos.ufpe.br/revistas/rbgfe/article/view/234295

M. F. dan H. A. A. Rahman., “Pengaruh Komposisi Material Komposit dengan Matriks Polypropylene

Berpenguat Serat Alam Terhadap Morfologi dan Kekuatan Sifat Fisik.,” Tek. ITS, vol. 5, no. 2, pp. 209–211,

and M. Fitriah Sari Nst, Harry Abrido S, “Pengaruh Penggunaan Larutan Alkali Pada Kekuatan Tarik Dan Uji Degradasi Komposit Polipropilena Bekas Berpengisi Serbuk Serabut Kelapa.,” Tek. Kim. USU., vol. 2,

no. 1, 2013, doi: 10.32734/jtk.v2il.1421.

N. A. M. D. Lohdy, S. G. Arrad, “Analisis Kekuatan Tarik pada Material Komposit dengan Serat Penguat

Polimer”.

T. D. Nuryadi, “Dasar dasar Statistik Penelitian,” 2017.

Posted

2023-09-02