Simulation Table of Resin-Based Composites with Snack Food Packaging Waste Fillers
Simulasi Pengujian Meja Komposit Berbasis Resin dengan Filler Sampah Kemasan Makanan Ringan (Snack)
DOI:
https://doi.org/10.21070/ups.3045Keywords:
testing, composite table, snack packaging waste, solidworks simulation softwareAbstract
The unresolved problem of plastic waste. The purpose of this study was to utilize packaging plastic waste as filler and reinforcement for composite tables. The first step taken is to test the characteristics of the composite table structure to find out errors before manufacturing. Von Misses stress, displacement, strain and safety factor are the stages of testing in the solidworks simulation software. The results obtained from the loading of 40-70 Kgf show that all composite table shape concepts meet safety standards, namely above number 1. Meanwhile, for displacement, the circular table shape reaches 6.858 mm. In the aspect of strain, the rectangular table shows the number 3.267. This means that a small rectangular table is sturdier than other table shapes. The conclusion is that resin-based composite tables reinforced with plastic waste can be used as a new breakthrough for table board materials and this design can be continued for manufacturing..
Downloads
References
REFERENSI
N. Agustina, H. Irianty, and N. T. Wahyudi, “Hubungan Karakteristik Petugas Kebersihan Dengan Pengelolaan Sampah Di Puskesmas Kota Banjarbaru,” J. Publ. Kesehat. Masy. Indones., vol. 4, no. 2, pp. 66–74, 2017, doi: 10.20527/jpkmi.v4i2.3843.
Y. Horie et al., “Lymphocytes mediate TNF-alpha-induced endothelial cell adhesion molecule expression: studies on SCID and RAG-1 mutant mice.,” J. Immunol., vol. 159, no. 10, pp. 5053–5062, 1997, doi: 10.4049/jimmunol.159.10.5053.
A. Al Faruqi, Studi Pengaruh Variasi Komposisi Binder Sampah Plastik Polypropylene (Pp) Dan High-Density Polyethylene (Hdpe) Terhadap Sifat Fisis Dan Sifat Mekanik Komposit Berpenguat Serbuk Ampas Tebu Untuk Aplikasi Papan Partikel. 2018.
S. S. Mukrimaa et al., “Analisis Struktur Kovarian Indeks Terkait Kesehatan Lansia di Rumah, Berfokus pada Perasaan Subjektif terhadap Kesehatan” J. Penelit. Pendidik. Guru Sekol. Dasar, vol. 6, no. August, p. 128, 2016.
N. N. Rahmawati, “TA : Desain Produk Meja Resto Seafood dengan Material Sabut Kelapa Bertema Laut (Studi Kasus : Fos Food Factory dan Kerang Time by Cv Fos Jaya Mojokerto),” 2021, [Online]. Available: https://repository.dinamika.ac.id/id/eprint/5953/.
2013 Nurun N, “Teknologi Material Komposit,” ثبثبثبNayiroh, vol. ث ققثق, no. ثق ثقثقثق, p. ثقثقثقثق, 2013.
F. Aprillina, G. Mulyono, and D. F. Tanaya, “Perancangan Meja Dan Kursi Ergonomis Sebagai Fasilitas Gaming,” J. Intra, vol. 7, no. 2, pp. 775–780, 2019.
H. Priono, M. Y. Ilyas, A. R. Nugroho, D. Setyawan, L. Maulidiyah, and R. A. Anugrah, “Desain Pencacah Serabut Kelapa dengan Penggerak Motor Listrik,” J. Engine Energi, Manufaktur, dan Mater., vol. 3, no. 1, p. 23, 2019, doi: 10.30588/jeemm.v3i1.494.
S. Khoiriah, “Desain Dan Analisis Kekuatan Pada Ladder Frame Chassis Kendaraan Hybrid Elektrik- Pneumatik Menggunakan Software Autodesk Inventor Professional 2017,” pp. 1–123, 2020.
P. Agustiar, W. Pracoyo, and F. Azharul, “Jurnal Rekayasa Material , Manufaktur dan Energi FT-UMSU Jurnal Rekayasa Material , Manufaktur dan Energi FT-UMSU,” J. Rekayasa Mater. Manufaktur dan Energi http//jurnal.umsu.ac.id/index.php/RMME, vol. 2, no. 2, pp. 131–139, 2019.
Downloads
Additional Files
Posted
Categories
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
