Plastic Sheet Color Quality Control Tool Using TCS3200 Sensor Based On Arduino Uno On CS Machinery STSV-1201000 Extruder Machine At PT Trass Anugrah Makmur
Alat Pengendali Kualitas Warna Lembar Plastik Menggunakan Sensor TCS3200 Berbasis Arduino Uno Pada Mesin Extruder CS Machinery STSV-120-1000 Di PT Trass Anugrah Makmur
DOI:
https://doi.org/10.21070/ups.2799Keywords:
TCS 3200 Sensor, Arduino uno, DC Motor 180 VAbstract
Industrial progress is very rapid by using sophisticated machines. But sometimes there are still gaps or deficiencies in a machine, for example an extruder machine that doesn't have automatic quality control. It is very important to be able to control product quality so that rejects do not occur which result in increased production costs. Therefore the author has succeeded in making a tool that can control the color quality on plastic sheets automatically. This tool uses the TCS3200 sensor as a medium for detecting color and then provides input to the Arduino Uno microcontroller as a signal processor. Then the microcontroller gives a signal to the relay so that the DC voltage from the driver can flow or be cut off to the DC motor. This tool is able to read RGB from plastic sheets which are still natural in color.
Downloads
References
R. V. Silalahi and S. Juliasari, “Analisis Strategi Bersaing Pada Perusahaan Manufaktur Pull Handle Menggunakan Porter’s Five Forces Model (Studi Kasus: PD XYZ),” J. Optim., vol. 8, no. 2, p. 215, 2022, doi: 10.35308/jopt.v8i2.5738.
I. Khoirul Anaam, T. Hidayat, R. Yuga Pranata, H. Abdillah, and A. Yhuto Wibisono Putra, “Pengaruh trend otomasi dalam dunia manufaktur dan industri,” Vocat. Educ. Natl. Semin., vol. 1, no. 1, pp. 46–50, 2022.
A. B. Dewantara and M. Kholil, “Sistem Otomasi Sebagai Upaya Perbaikan Kualitas Dengan Metode Spc Pada Line Finishing (Studi Kasus: Pt. X),” J. Ilm. Tek. Ind., vol. 3, no. 3, pp. 141–149, 2017, doi: 10.24912/jitiuntar.v3i3.465.
E. S. BACO, “Sistem Perancangan Alat Pendeteksi Warna Menggunakan Sensor TCS3200 Berbasis Arduino Uno,” Repositori.Usu.Ac.Id, vol. 1, no. 3, pp. 82–91, 2019, [Online]. Available: https://repositori.usu.ac.id/bitstream/handle/123456789/10518/130903126.pdf sequence=1&isAllowed=y
I. Syach, Y. S. Azzahra, and S. R. Seftia, “MONITORING DAN KENDALI KONVEYOR PENYORTIR BARANG BERDASARKAN WARNA RGB BERBASIS SUPERVISORY CONTROL AND DATA ACQUISITION,” J. Indones. Sos. Teknol., vol. 14, no. 1, pp. 1–13, 2021.
Y. A. K. Utama, Tamaji, and R. H. Sanjaya, “Desain Dan Pengendalian Warna Mood Lamp Otomatis Berdasarkan Waktu Menggunakan Aplikasi Android Pada Smartphone,” J. Tecnoscienza, vol. 2, no. 2, pp.123–143, 2018. 6 | Page
N. D.A, “Alat Pendeteksi Warna Menggunakan Sensor Warna,” J. Teknol. Sist. Inf. dan Sist. Komput. TGD, vol. 2, no. 2, pp. 106–117, 2019.
V. Dwi Ratnawati, “Alat Pendeteksi Warna Menggunakan Sensor Warna TCS3200 Dan Arduino Nano,” Pros. Semin. Nas. Vokasi Indones., vol. 1, no. November, pp. 167–170, 2018.
R. FADHILA, “Pengaruh Penggunaan Metode Eksperimen Terhadap Kemampuan Mengenal Sains Pada Anak Kelompok B Di Tk Sari Teladan …,” 2020, [Online]. Available: http://repository.radenintan.ac.id/9701/1/pusat.pdf
F. I. lestari evi dwi dan mas’udah Pendidikan, U. Negeri, and S. Email, “PENINGKATAN KEMAMPUAN MENGENAL WARNA MELALUI KEGIATAN KLASIFIKASI KANCING WARNA PADA ANAK USIA 4-5 TAHUN Evi Dwi Lestari Mas ’ udah,” Child. Educ. J. Pendidik. Anak Usia Dini, vol. 05, pp. 1–5, 2016.
L. Y. T. Suarez, “MENINGKATKAN KEMAMPUAN MENGENAL WARNA MELALUI METODE EKSPERIMEN PADA ANAK USIA 3-4 TAHUN DI KB MELATI PUTIH JETIS BANTUL,” no. 1, pp. 1–27, 2015.
O. Fatimah, I. Ragil, and W. Atmojo, “Penggunaan Media Pewarna Bahan Alam Untuk Sekunder Pada Peserta Didik Kelompok a Tk Islam Bakti Xii Wonorejo Tahun Ajaran 2014 / 2015,” pp. 1–8, 2015.
F. B. Alamsah and S. Syahrorini, “Selection Of Tomato Fruits by Color and Size Based on Arduino,” Procedia Eng. Life Sci., vol. 3, no. December, 2023, doi: 10.21070/pels.v3i0.1345.
N. L. Husni, S. Rasyad, M. S. Putra, Y. Hasan, and J. Al Rasyid, “Pengaplikasian Sensor Warna Pada Navigasi Line Tracking Robot Sampah Berbasis Mikrokontroler,” J. Ampere, vol. 4, no. 2, p. 297, 2020, doi: 10.31851/ampere.v4i2.3450.
A. Proverawati and C. Ismawati, “SENSOR PEMILIH WARNA,” Yogyakarta Nuha Med., vol. 4, no.September, pp. 29–36, 2010.
Z. Lubis et al., “Kontrol mesin air otomatis berbasis arduino dengan smartphone,” Bul. Utama Tek., vol. 14, no. 3, pp. 155–159, 2019, [Online]. Available: https://jurnal.uisu.ac.id/index.php/but/article/view/1265
M. Ulum, I. Anshory, D. H. R. Saputra, and S. D. Ayuni, “Arduino Based Multifunction Fan,” Procedia Eng. Life Sci., vol. 1, no. 2, 2021, doi: 10.21070/pels.v1i2.1026.
R. Chen, W. Zhai, and Y. Qi, “Mechanism and technique of friction control by applying electric voltage. (II) Effects of applied voltage on friction,” Mocaxue Xuebao/Tribology, vol. 16, no. 3, pp. 235–238, 1996.
Eva Kurnia Yulyawan, Mas Ahmad Baihaqi, Misdiyanto, and Dani Hari Tunggal Prasetiyo, “Studi Peningkatan Unjuk Kerja Motor DC Dengan Penggulungan Ulang Metode Memusat,” J. Otomasi Kelistrikan dan Energi Terbarukan, vol. 4, no. 1, pp. 24–29, 2022, [Online]. Available: https://jurnal.pnj.ac.id/index.php/electrices/article/view/4617
I. Bab, “DESAIN DAN IMPLEMENTASI PLC OUTSEAL UNTUK MENGGERAKKAN MOTOR DC DENGAN BERBAGAI VARIASI KECEPATAN,” Katalog.Ukdw.Ac.Id, pp. 1–3, 2020, [Online].Available:http://katalog.ukdw.ac.id/id/eprint/6167%0Ahttps://katalog.ukdw.ac.id/6167/1/62170056_bab1_bab5_daftar
pustaka.pdf
A. Rofeg, M. Kabib, and R. Winarso, “Pembuatan Mesin Screw Conveyor Untuk Pencampuran,” Crankshaft, vol.1, no. September, pp. 21–28, 2018, [Online]. Available: https://jurnal.umk.ac.id/index.php/cra/article/view/2583
Sabardiyanto and N. Iskandar, “ANALISIS MEKANIK SCREW CONVEYOR TUBULAR DIAMETER 200 mm DENGAN AUTODESK INVENTOR,” J. Tek. Mesin, vol. 4, no. 2, pp. 178–186, 2016.
D. A. Saputra, S. Kom, M. Eng, and N. Utami, “Rancang bangun alat pemberi pakan ikan otomatis berbasis mikrokontroler,” J. Tek. Elektro dan Komput., vol. 4, no. 7, pp. 54–64, 2015.
H. S. Weku, E. V. C. Poekoel, R. F. Robot, and M. Eng, “Rancang Bangun Alat Pemberi Pakan Ikan Otomatis Berbasis Mikrokontroler,” J. Tek. Elektro dan Komput., vol. 4, no. 7, pp. 54–64, 2015.
E. Enny, “Tachometer Laser , Pemakaian Dan Perawatannya,” Metana, vol. 13, no. 1, p. 7, 2018, doi: 10.14710/metana.v13i1.12578.
U. R. Primadi, P. Studi, T. Elektro, F. Teknik, and U. M. Surakarta, “Sistem Monitoring Rpm Motor Listrik Melalui Perangkat Telepon Pintar Berbasis IoT,” 2019.
M. T. Student et al., “Implementasi Sensor Proximity Otomasi Pengangkat Roda Kereta Terintegrasi di Android,” Front. Neurosci., vol. 14, no. 1, pp. 1–13, 2021.
a. r Imam and m. n Muhammad, “Analisa Penggunaan Sensor Proximity LJC 18 A3-B-Z/Bx Sebagai Salah Satu Sensor Prototype Cuci mobil Otomatis,” Indones. J. Technol. Informatics Sci., vol. 1, no. 1, pp. 13–16, 2018, [Online]. Available : https://jurnal.umk.ac.id/index.php/ijtis/article/view/4597/2015
P. Elektronik, “IMPLEMENTASI SISTEM BLUETOOTH MENGGUNAKAN ANDROID DAN ARDUINO UNTUK KENDALI PERALATAN ELEKTRONIK,” vol. 2, no. 2, pp. 121–127, 2021.
R. D. Risanty and L. Arianto, “Rancang Bangun Sistem Pengendalian Listrik Ruangan Dengan Menggunakan Atmega 328 Dan Sms Gateway Sebagai Media Informasi,” Sist. Inf., vol. 7, no. 2, pp. 1–10, 2017.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
