Effect Of NaOH Treatment on Sansivera Fiber Using Time Variation as Composite Reinforcement
Pengaruh Perlakuan Naoh terhadap Serat Sansivera dengan Menggunakan Variasi Waktu sebagai Penguat Komposit
DOI:
https://doi.org/10.21070/ups.2785Keywords:
Sansivera Hand Lay Up MicrostructureAbstract
This study aims to analyze sansivera fiber-reinforced composite materials with polyester matrix and treat sansivera fibers against NaOH alkaline liquid with a content of 15% with a time variation of 1,2,4,6,8 hours. In this study, the design experiment uses the hand lay-up method, which aims to analyze experimental data and provide information on factors that affect parameters. The experiment carried out was through several methods, the results of the fiber tensile test research from the soaking process with 15% NaOH alkali for 1, 2, 4, 6 and 8 hours, obtained the best results processed 15% NaOH alkaline soaking for 8 hours. From the results of the fiber tensile test, 5 composite specimens will be formed. Maximum tensile strength was obtained with 15% treatment for 4 hours of 266 N/mm2 and the highest tensile strength at 15% treatment for 6 hours of 4.17mm.
Downloads
References
Hapiz, P., Doyan, A., & Sedijani, P. (2019). Uji Mekanik Material Komposit Serat Pinang. Jurnal Penelitian Pendidikan Ipa Sumba, 4(2).
Irawan, A. P., & Sukania, I. W. (2013). Kekuatan Tekan dan Flexural Material Komposit Serat Bambu Epoksi. Jurnal Teknik Mesin, 14(2), 59-63.
Iskandar Fajri, Rahmat, & Sugiyanto, Dan T. (2013). Studi Sifat Mekanik Komposit Serat Sansevieria Cylindrica Dengan Variasi Fraksi Volume Bermatrik Polyester. Jurnal Fema, 1(2).
Kastiawan, I. M., & Rizeki, C. A. (2018). Analisa Pengaruh Orientasi Arah Serat Terhadap Kekuatan Tarik Dan Impact Material Komposit Serat Alam (Serat Agave Dan Serat Sansivera). Teknik Mesin, 1(2).
Kurniawan, D. A. (2016). Unjuk Kerja Turbin Angin Propeller 4 Sudu Berbahan Komposit Berdiameter 100 Cm, Dengan Lebar Maksimum Sudu 13 Cm Pada Jarak 19 Cm Dari Pusat Sumbu Poros Tugas. Tugas Akhir Jurusan Teknik Mesin. Http://Biblioteca.Ibge.Gov.Br/Visualizacao/Monografias/Gebis - Rj/Rbg/Rbg 1995 V57_N1.Pdf%0ahttps://Periodicos.Ufpe.Br/Revistas/Rbgfe/Article/View/234295
Laksono, A. D., Basyaruddin, & Adlina, N. (2019). Pengaruh Perlakuan Alkalisasi Serat Alam Kayu Bangkirai (Shorea Laevifolia Endert) Pada Sifat Mekanik Komposit Dengan Matriks Poliester. Jst (Jurnal Sains Terapan), 5(2), 1–7. Https://Doi.Org/10.32487/Jst.V5i2.672
Maryanti, B., Sonief, A. A. A., & Wahyudi, S. (2011). Pengaruh alkalisasi komposit serat kelapa-poliester terhadap kekuatan tarik. Jurnal Rekayasa Mesin, 2(2), 123-129.
Murjito, M. (2019, November). KAJIAN SERAT SANSEVIERIA TRIFASCIATA PRAIN SEBAGAI PENGUAT MATERIAL KOMPOSIT. In Prosiding SENTRA (Seminar Teknologi dan Rekayasa) (No. 5, pp. 96-101).
Priyandokohadi, S., & Rizeki, C. A. (2018). Analisa Pengaruh Orientasi Arah Serat terhadap Kekuatan Tarik dan Impact Material Komposit Serat Alam (Serat Agave dan Serat Sansivera). MEKANIKA: Jurnal Teknik Mesin, 4(01), 12-18.E. H. Miller, "A note on reflector arrays," IEEE Transactions on Antennas and Propagation, to be published.
Surbakti, E. J., Sinuhaji, P., & Simbolon, T. R. (2013). Pembuatan Dan Karakteristik Komposit Serat Kulit Jagung Dengan Matriks Epoksi. Departemen Fisika Fmipa.
Tarkono, T., Fajri R. I., & Sugiyanto, S. (2013). Studi sifat mekanik komposit serat Sansevieria cylindrica dengan variasi fraksi volume bermatrik polyester (Doctoral dissertation, Lampung University).H. A. Nimr, "Defuzzification of the outputs of fuzzy controllers," presented at 5th Int. Conf. on Fuzzy Systems, 1996, Cairo, Egypt. 1996.
Widodo, E. & Febrianto, E. W (2022). Analysis Of Sansevieria Fiber Composite With Naoh Alkalization. Procedia of Social Sciences and Humanities, 3, 959-966.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
