Confirmation Experiment Of Friction Stir Welding Process On Aluminum Alloy Aa 6061-T651 On Impact Strength and Vickers Hardness
Eksperimen Konfirmasi Proses Friction Stir Welding Pada Material Aluminium Alloy Aa 6061-T651 Terhadap Kekuatan Impact dan Hardness Vickers
DOI:
https://doi.org/10.21070/ups.2770Keywords:
Friction Stir Welding, Uji Impact, Uji Vickers, FSW, AA6061Abstract
Friction Stir Welding (FSW) has become a significant method in the manufacturing industry because of its ability to produce strong joints between metals without causing significant defects. This study aims to analyze FSW welding using certain parameters, namely rotational speed of 2192 RPM, welding speed of 36.3 mm/minute, tool tilt of 3.4°, and concave shoulder angle of 9°. This study involves the application of the FSW welding method to certain metal materials with predetermined parameters. After the welding process is complete, an impact test is carried out to evaluate the toughness of the material in the face of dynamic loads. Impact tests provide important information about crack behavior and energy absorption in the joint area affected by the welding process. In addition, the Vickers test was also carried out to measure surface hardness and determine changes in the microstructure in the joint area.
Downloads
References
A. Wibowo et al., “PENGARUH FREKUENSI PULSE PENGELASAN GTAW PADA ALUMINIUM ALLOY 6061,” vol. 11, no. 1, pp. 59–62, 2019.
P. Sadeesh et al., “Studies on friction stir welding of AA 2024 and AA 6061 dissimilar metals,” Procedia Eng., vol. 75, pp. 145–149, 2024, doi: 10.1016/j.proeng.2013.11.031.
S. R. Yazdi and B. Beidokhti, “Pinless tool for FSSW of AA 6061-T6 aluminum alloy,” vol. 267, no. November 2018, pp. 44–51, 2019.
W. Elbar, K. Tampubolon, U. Pembinaan, and M. Indonesia, “Pengaruh Campuran Silikon Pada Aluminium Terhadap Kekerasan dan Tingkat Keausannya Effect of Silicone Alloys on Aluminum on Hardness and Wear Rates,” vol. 4, no. 2, pp. 183–196, 2020, doi: 10.31289/jmemme.v4i2.4070.
U. B. Aji Nurhafid, Sarjito Jokosisworo, “Analisa Pengaruh Perbedaan Feed Rate Terhadap Kekuatan Tarik Dan Impak Aluminium 6061 Metode Pengelasan Friction Stir Welding,” J. Tek. Perkapalan, vol. 5, no. 2, pp. 473–481, 2018.
A. Sudrajat and J. Rotor, “ANALISIS SIFAT MEKANIK HASIL PENGELASAN ALUMINIUM AA 1100 DENGAN METODE FRICTION STIR WELDING (FSW) Angger Sudrajat F.P. 1 , Sumarji 2 , Mahros Darsin 3,” vol. 5, pp. 8–17, 2012.
A. Fahrizal Fandi, “Pengaruh arah putaran tool terhadap sifat mekanik hasil sambungan, Aluminium Friction, Side Mesin, Teknik Teknik, Konsentrasi Brawijaya, Universitas Teknik, Fakultas aluminium double side friction stir welding,” 2018.
Wartono and H. Kuntara, “Pengaruh Putaran Tools Terhadap Struktur Mikro Dan Sifat Mekanis Sambungan Friction Stir Welding Pada Aluminium Paduan 6061 Wartono, Hasta Kuntara,” pp. 1039–1044, 2017, [Online]. Available: https://journal.itny.ac.id/index.php/ReTII/article/view/386.
M. A. Dewantara, H. Yudo, D. T. Perkapalan, F. Teknik, U. Diponegoro, and K. Tarik, “Analisa Pengaruh Gas Pelindung Argon Grade A dan Grade C Terhadap Kekuatan Impact dan Tekuk Sambungan Butt Joint pada Aluminium 5083,” J. Tek. Perkapalan, vol. 5, no. 2, pp. 367–373, 2017.
P. A. Hutagaol, J. Junaidi, and ..., “Analisa Heat Treatment Terhadap Kekuatan Uji Impact Aluminium 5083 Tahun 2021,” Semin. Nas. Tek. …, pp. 1–4, 2022, [Online]. Available: https://jurnal.uisu.ac.id/index.php/semnastek/article/view/5635%0Ahttps://jurnal.uisu.ac.id/index.php/semnastek/article/download/5635/4124.
Y. Handoyo, “Perancangan Alat Uji Impak Metode Charpy Kapasitas 100 Joule,” J. Ilm. Tek. Mesin, vol. 1, no. 2, pp. 45–53, 2013, [Online]. Available: https://jurnal.unismabekasi.ac.id/index.php/jitm/article/view/735.
I. P. Lokantara, “Analisis Kekuatan Impact Komposit Polyester-Serat Tapis Kelapa Dengan Variasi Panjang Dan Fraksi Volume Serat Yang Diberi Perlakuan NaOH,” Din. Tek. Mesin, vol. 2, no. 1, pp. 47–54, 2012, doi: 10.29303/d.v2i1.111.
F. O. Momow and R. Mufidin, “Studi Pengaruh Gerak Voeding Terhadap Kekuatan Tarik Dan Ketangguhan Impak Sambungan Friction Stir Welding ( Fsw ) Pada Aluminium Paduan,” vol. 2022, no. November, pp. 568–577, 2022.
K. Tarik, D. A. N. Impak, P. Sambungan, and F. S. Welding, “Aluminium 6061 Hasil Pengelasan Double Sided,” vol. 7, no. 4, pp. 294–302, 2019.
M. Budi et al., “Pengaruh Feed Rate dan Kecepatan Putar Pin Tool Friction Stir Welding ( FSW ) terhadap Kekuatan Tarik dan Kekerasan Aluminium 5052,” vol. 2, no. 2, pp. 83–95, 2018.
ASM International, ASM Handbook Volume 3 : Alloy Phase Diagrams. 1998.
H. S. Tira, A. Natsir, and T. Putranto, “Kinerja modul surya melalui variasi solar collector dan kecepatan angin,” Din. Tek. Mesin, vol. 10, no. 1, p. 25, 2020, doi: 10.29303/dtm.v10i1.302.
A. Klevinskis and V. Bučinskas, “Analysis of a Flat-Plate Solar Collector,” Moksl. - Liet. ateitis, vol. 3, pp. 39–43, 2011.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
