Manufacturing and Testing of a Composite Table Prototypes Filled with Snack Food Packaging Waste
Pembuatan dan Pengujian Prototipe Meja Komposit Ber-Filler Sampah Kemasan Makanan Ringan (Snack)
DOI:
https://doi.org/10.21070/ups.2713Keywords:
Prototype, Manufactur, plastic waste, Load Compression TestAbstract
Even though it is yet a prototype, the goal of creating a composite table out of snack packaging waste is to use this waste to create a composite table. For youngsters entering kindergarten and first grade. Pressure testing was done with the composite table's rectangular form and different ratios of resin to snack waste, including 50%:50%,60%:40%, 70%:30%, and 80%:20%. A composite table prototype was created using the pressure test's best outcomes. Twenty parents of kindergarten- or elementary-aged children were given a questionnaire to complete in order to gauge their comfort level with utilizing the composite table prototype. Testing the comfort of using the composite table prototype was carried out in a questionnaire to 30 parents who had children aged kindergarten or elementary school. The results of the questionnaire were processed using the SPSS statistical method and it was concluded that the composite table prototype was quite comfortable to use.
Downloads
References
R. Hidayat, Y. F. Luktiana, and R. Anisa, “Pendampingan Pemanfaatan Sampah Plastik Menjadi Produk Yang Memiliki Nilai Tambah,” J. Ilm. Pengabdi. Kpd. Masy. PAKEM, vol. 3, no. 1, pp. 151–158, 2021.
M. Aldi, “Pembuatan Bet Tenis Meja Dengan Bahan Komposit Gabungan Dua Serat Alam Sebagai Penguat,”J. Ekon. Vol. 18, Nomor 1 Maret201, vol. 2, no. 1, pp. 41–49, 2020.
M. Yani and F. Lubis, “Pembuatan dan Penyelidikan Perilaku Mekanik Komposit Diperkuat Serat Limbah
Plastik Akibat Beban Lendutan,” J. Ilm. Mek. Tek. Mesin ITM, vol. 4, no. 2, pp. 77–84, 2018.
D. A. Siregar, A. J. Zulfikar, Y. Siahaan, and R. A. Siregar, “Analisis Kekuatan Tekan Selubung Komposit Laminat E-glass pada Beton Kolom Silinder dengan Metode Vacuum Bagging,” J. Rekayasa Mater. Manufaktur dan Energi, vol. 5, no. 1, pp. 20–25, 2022.
S. Lubis, A. M. Siregar, C. A. Siregar, and I. Siregar, “Kajian Eksperimen Kemampuan Penyerapan Energi Pada Struktur Sarang Lebah Yang Diuji Secara Statis Sudirman,” J. Rekayasa Mater. Manufaktur dan Energi, vol. 4, no. 1, pp. 64–72, 2021.
I. Purnawan and A. Prabowo, “Pengaruh Penambahan Limestone terhadap Kuat Tekan Semen Portland
Komposit,” J. Rekayasa Proses, vol. 11, no. 2, p. 86, 2018, doi: 10.22146/jrekpros.31136.
H. Trisna and A. Mahyudin, “ANALISIS SIFAT FISIS DAN MEKANIK PAPAN KOMPOSIT GIPSUM SERAT IJUK DENGAN PENAMBAHAN BORAKS ( Dinatrium Tetraborat Decahydrate ),” J. Fis. Unand, vol. 1, no. 1, pp. 30–36, 2012.
Sumartini, K. S. Harahap, and Sthevany, “Kajian Pengendalian Mutu Produk Tuna Loin Precooked Frozen di Perusahaan Pembekuan Tuna x Study of Quality Control of Tuna Loin Precooked Frozen Products Using The Likert Scale Method,” Aurelia J., vol. 2, no. 1, pp. 29–38, 2020.
E. Suwandi, H. F. Imansyah, and H. Dasril, “Analisis Tingkat Kepuasan Menggunakan Skala Likert Pada
Layanan Speedy yang Bermigrasi ke Indihome,” J. Electr. Eng. Energy, Inf. Technol., vol. 1, p. 1, 2019.
A. H. Suasapha, “Skala Likert Untuk Penelitian Pariwisata ; Beberapa Catatan Untuk Menyusunnya Dengan Baik,” J. Kepariwisataan, vol. 19, no. 1, pp. 29–40, 2020.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
