Improvement of Work Posture on Welding Catwalks Using the Rapid Entire Body Assesment (REBA) and Quick Exposure Check (QEC) Methods
Perbaikan Postur Kerja pada Pengelasan Catwalks dengan Menggunakan Metode Rapid Entire Body Assesment (REBA) Dan Quick Exposure Check (QEC)
DOI:
https://doi.org/10.21070/ups.2625Keywords:
Ergonomics, Rapid Entire Body Assessment (REBA), Quick Exposure Check (QEC)Abstract
CV. Frontec Agritama Engineering a company engaged in manufacturing. A welder experiences a decrease in productivity in catwalk welding due to a less ergonomic working position. It is known that 3 out of 10 workers in the welding section of the catwalks experience pain in the back, shoulders and arms caused by incorrect work postures in carrying out work activities. To overcome these problems using the Rapid Entire Body Assessment (REBA) and Quick Exposure Check (QEC) methods. The results of the study obtained a score calculated using the REBA method with an average score of 9 for all welder activities in the catwalks welding section with a high level of risk. The results of QEC calculations show that the exposure level for welding platform catwalks is 81.48%, for worker 1 catwalks is 76.70% and worker 2 is 72.15% with a very high risk level for all work stations.
Downloads
References
F. M. A. Antaqiya, U. Budiarto, and S. Jokosisworo, “Analisa Pengaruh Variasi Proses Preheating Pada Pengelasan SMAW
Terhadap Kekuatan Tarik dan Struktur Mikro Baja ST 60,” Tek. Perkapalan, vol. 5, no. 2, pp. 421–430, 2019.
R. Y. Pratama, M. Basuki, and E. Pranata, “Pengaruh variasi arus pengelasan smaw untuk posisi pengelasan 1g pada material baja kapal ss 400 terhadap cacat pengelasan,” Jur. Tek. Perkapalan FTMK-ITATS, vol. 02, no. 1, pp. 203–209, 2020.
S. A. Handayani and E. N. Hayati, “Perancangan Stasiun Kerja Guna Menunjang Kinerja Operator,” J. Cakrawala Inf., vol. 2, no. 1, pp. 69–79, 2022, doi: 10.54066/jci.v2i1.202.
K. Dani Lestari and Hendra, “Postur Kerja dan Gangguan Otot Rangka Akibat Kerja Pada Juru Las,” J. Ergon. Indones., vol. 8, no. 1, pp. 30–36, 2022, [Online]. Available: https://doi.org/10.24843/JEI.2022.v08.i01.p01
N. Nilamsari and F. Innafin, “Identifikasi Musculoskeletal Disorder dan Penilaian Postur Kerja pada Pekerja Loader Semen di PT Swabina Gatra Identification of Musculoskeletal Disorder and assessment of work posture on Cement Loader Workers at PT Swabina Gatra,” J. Ergon. Indones., vol. 8, no. 1, pp. 46–56, 2022, [Online]. Available: https://ojs.unud.ac.id/index.php/jei/article/view/87184
U. Wicaksono, L. Made, I. Sri, and H. Adiputra, “GAMBARAN KELUHAN MUSKULOSKELETAL DAN KELELAHAN SEBELUM DAN SETELAH BEKERJA PADA PEKERJA DI UD. BATU BUKIT,” J. Keperawatan Suaka Insa., vol. 6, no. 1, 2021.
H. Pattiasina, N, P. Markus, and R. Pattiselano, S, R, “Kajian Antopometri Pengrajin Tenun Ikat Khas Maluku,” Simetrik, vol. 11, no. 1, pp. 388–397, 2021.
B. isma Putra, Ribangun Bamban Jakaria, and “ Buku Ajar Perancangan Sistem Kerja dan Ergonomi” 2020., Buku Ajar. 2015.
A. N. Amri and B. I. Putra, “ERGONOMIC RISK ANALYSIS OF MUSCULOSKELETAL DISORDERS (MSDs) USING ROSA AND REBA METHODS ON ADMINISTRATIVE EMPLOYEES FACULTY OF SCIENCE,” J. Appl. Eng. Technol. Sci., vol. 4, no. 1, pp. 104–110, 2022, doi: 10.37385/jaets.v4i1.954.
E. Megawati, W. S. Saputra, Y. Attaqwa, and S. Fauzi, “Abstrak: Tujuan kegiatan pengabdian kepada masyarakat ini adalah untuk mengedukasi pegurangan resiko terjadinya Musculoskeletal Disorders (MSDs) dini, pada penjahit keliling di Ngaliyan Semarang dengan cara observasi , pelatihan praktis ,” J. BUDIMAS, vol. 03, no. 02, pp. 450–456, 2021.
I. Hanom, R. A. Rozefy, and H. T. Filasta, “the Influence of Ergonomic on Working From Home Activities,” Idealog Ide dan Dialog Desain Indones., vol. 5, no. 1, p. 58, 2020, doi: 10.25124/idealog.v5i1.3959.
M. Masniar and B. S. Rusli, “Analisa Perancangan Papan Landasan Ergonomis Untuk Aktivitas Di Kolong Mobil,” Metod. J. Tek. Ind., vol. 7, no. 2, pp. 68–78, 2021, doi: 10.33506/mt.v7i2.1653.
M. Ridwan Malik, M. Alwi, E. Wolok, A. Rasyid, and P. Koresponden, “Analisis Postur Kerja Pada Karyawan Menggunakan Metode Rula (Studi kasus Area Control Room, Joint Operating Body Pertamina-Medco E&P Tomori Sulawesi),” Jambura Ind. Rev., vol. 1, no. 1, p. 2021, 2021, doi: 10.XXXXX/jirev.vXiX.XX-XX.
M. R. H. Wibowo, S. S. Dahda, and A. W. Rizki, “ANALISIS POSTUR TUBUH PEKERJA PADA STASIUN KERJA PEMOTONGAN PIPA UNTUK MENGURANGI MUSCULOSKELETAL DISORDER (MSDs),” vol. 3, no. 1, 2022.
A. G. Rizaldi and A. S. Cahyana, “Analisa Resiko Postur Kerja Berdasarkan Hasil Evaluasi Menggunakan Metode Quick Exposure Check,” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 5, no. 1, pp. 51–62, 2021, doi: 10.21070/prozima.v5i1.1350.
D. P. Restuputri, I. Masudin, I. sekar Ningrum, and A. putri Septira, “Ebook Ergonomi Industri.UMM 2022,” 2022.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
