DOI of the published article https://journals.telkomuniversity.ac.id/jett/article/view/6223
Design of Warming and Water Temperature Control in Baby Milk
Rancang Bangun Alat Penghangat dan Kontrol Suhu Air pada Susu Bayi
DOI:
https://doi.org/10.21070/ups.2599Keywords:
Formula Milk, Arduino Uno, Temperature Control, LCD 16x2, DHT11Abstract
This study aims to make a warmer and water temperature control device for baby milk using an Arduino Uno, a DHT11 temperature sensor, and a 16x2 LCD display. This tool works by measuring the water temperature using the DHT11 temperature sensor, which then the results from the sensor are displayed via a 16x2 LCD display screen. This tool also provides a temperature control that can control the desired temperature level. If the water temperature is too low, the temperature control device can be used to increase the water temperature until it reaches the desired temperature. Conversely, if the water temperature is too high the user can reduce the temperature as desired. The results of the research which was carried out for approximately 24 hours managed to provide a consistent water temperature between 36oC to 37oC in conditions where the sensor is no more than 7cm from the bottle.
Downloads
References
S. C. S. Yanti and I. Sulistiyowati, “An Inventory Tool for Receiving Practicum Report Based on IoT by Using ESP32-CAM and UV Sterilizer: A Case Study at Muhammadiyah University of Sidoarjo,” Journal of Electrical Technology UMY, vol. 6, no. 1, 2022, doi: 10.18196/jet.v6i1.14607.
R. Dewi, “Hubungan Promosi Susu Formula dan ASI Eksklusif,” Jurnal Berita Ilmu Keperawatan, vol. 14, no. 1, 2021, doi: 10.23917/bik.v14i1.13187.
D. Kartika Ningrum, G. Jenny Ratnawati, and I. Purwaningsih, “Pengaruh Suhu Penyeduhan terhadap Kadar Protein pada Susu Formula Menggunakan Metode KJELDAHL,” Jurnal Laboratorium Khatulistiwa, vol. 2, no. 1, 2019, doi: 10.30602/jlk.v2i1.317.
Y. Yolnasdi, A. Arviansyah, D. Irfan, and A. Ambiyar, “Rancang Bangun Pengontrol Suhu Ruangan Berbasis Mikrokontroler Arduino Uno,” INTECOMS: Journal of Information Technology and Computer Science, vol. 3, no. 2, 2020, doi: 10.31539/intecoms.v3i2.1730.
S. Purwiyanti, “Aplikasi Efek Peltier Sebagai Kotak Penghangat dan Pendingin Berbasis Mikroprosessor Arduino Uno,” Jurnal Rekayasa dan Teknologi Elektro, vol. 3, 2017.
I. Nandang and R. K. Dewi, “Efektivitas Sensor DHT11 Sebagai Indikator Suhu & Kelembaban Pada Inkubator Bayi,” Java Health Jurnal, vol. 8, no. 3, 2021.
A. Najmurrokhman, A. Najmurrokhman, K. Kusnandar, and A. Amrulloh, “PROTOTIPE PENGENDALI SUHU DAN KELEMBABAN UNTUK COLD STORAGE MENGGUNAKAN MIKROKONTROLER ARDUINO ATMEGA328 DAN SENSOR DHT11,” J Teknol, vol. 10, no. 1, 2018.
F. Prasetyawan and L. Anifah, “Sistem Kontrol Suhu Ketel Elektrik Menggunakan Metode Logika Fuzzy Sugeno Berbasis ESP8266 dengan Komunikasi Internet Of Things (IoT),” Journal of Information Engineering and Educational Technology, vol. 5, no. 1, 2021, doi: 10.26740/jieet.v5n1.p5-12.
R. A. Rakhman, M. Fauziyah, and D. Dewatama, “Kontrol Suhu Proses Pemasakan Bubur Kedelai Menggunakan Metode PID Pada Alat Pembuat Tahu,” Jurnal Elektronika dan Otomasi Industri, vol. 6, no. 2, 2021, doi: 10.33795/elkolind.v6i2.160.
N. Syafitri, Y. Arman, and B. P. Lapanporo, “Rancang Bangun Pengontrol Suhu Otomatis Pada Sistem Pemanas Day Old Chicken (DOC) Berbasis Mikrokontroller ATMEGA8,” Prisma Fisika, vol. 1, no. 2, 2013.
A. L. Bangala, L. Rompis, and J. B. Sanger, “PERANCANGAN SISTEM OTOMATISASI SUHU RUANGAN BERBASIS MIKROKONTROLER,” Jurnal Ilmiah Realtech, vol. 14, no. 1, 2018, doi: 10.52159/realtech.v14i1.24.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
![Creative Commons License](http://i.creativecommons.org/l/by/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution 4.0 International License.