The Proposal To Improve Warehouse Layout Using Shared Storage and Class Based Storage Methods
Usulan Perbaikan Tata Letak Gudang Menggunakan Metode Shared Storage dan Class Based Storage
DOI:
https://doi.org/10.21070/ups.2564Keywords:
Warehouse, Re-layout Facility, First in First Out, Shared Storage, Class Based StorageAbstract
Warehouse layout is one of the problems found during the observation. The messy warehouse conditions resulted in delayed deliveries because the search for goods took a long time. Therefore, this study aims to provide recommendations for improving the layout of finished goods warehouses to make them more efficient in transferring material handling. Shared storage and class-based storage are two methods used to address this problem, and both are used extensively in the construction of large warehouses. Shared storage (SS) uses the FIFO (First In First Out) method by categorizing products based on the frequency of issuance which is closer to the departure gate. Since the two methods are very similar and related, the search procedure is fast. The results of this study were obtained in the form of a warehouse layout proposal with an efficiency percentage of 71.48% and a more systematic area data collection.
Downloads
References
F. Y. Panjaitan, dan F. N. Azizah, “Perancangan Tata Letak Fasilitas Gudang Produk Jadi Menggunakan Metode Activity Relationship Diagram Pada PT. JVC Electronics Indonesia,” Jurnal Ilmiah Wahana Pendidikan, vol. 8, no. 9, hlm. 30–38, Jun 2020, doi: 10.5281/zenodo.6629938.
H. A. Sudrajat, E. B. Santoso, dan F. Debora, “Usulan Perbaikan Area Gudang Material Terhadap Efisisensi Jarak dan Biaya Handling dengan Metode Systematic Layout Planning (SLP) di Industri Flexible Packaging,” Jurnal Inkofar, vol. 5, no. 2, hlm. 44–53, Des 2021. [Daring]. Tersedia pada: https://www.politeknikmeta.ac.id/meta/ojs/.
A. E. Ramadhany, dan H Y K Sembada, “Usulan Tata Letak Perbaikan Gudang di Toko A Gilang dengan Menggunakan Metode Shared Storage,” Bulletin of Applied Industrial Engineering Theory, vol 2, no. 2, hlm. 138-144, Sept 2021.
M. Rauf, dan M. R. Radyanto, “Perbaikan Kinerja Gudang Melalui Penataan Ulang Tata Letak Gudang Suku Cadang Menggunakan Metode Class Based Storage di PT. DN Semarang,” Journal of Industrial Engineering and Operation Management, vol. 5, no. 2, hlm. 111–121, Nov 2022. [Daring]. Tersedia pada: https://ojs.uniska-bjm.ac.id/index.php/jieom/index.
O. Adiyanto, dan A. F. Clistia, “Perancangan Tata Letak Fasilitas Produksi UKM Eko Bubut dengan Metode Computerized Relationship Layout Planning (CORELAP),” JISI: Jurnal Integrasi Sistem Industri, vol. 7, no. 1, hlm. 49–56, Feb 2020. [Daring]. Tersedia pada: https://jurnal.umj.ac.id/index.php/jisi.
M. A. Jumali, Rusdiyantoro, A. R. Maulidah, dan Y. Utomo, “Rearranging First-In First-Out (FIFO) Parts Layouts,” PROZIMA (Productivity, Optimization and Manufacturing System Engineering), vol. 6, no. 2, hlm. 137–142, Des 2022, doi: 10.21070/prozima.v6i2.1580.
F. M. Subqi dan D. Anggraini, “Data Mining untuk Pemeliharaan Prediktif Mesin Produksi Berdasarkan Database Kerusakan Mesin Menggunakan Naïve Bayes Classifier,” Jurnal Ilmiah Komputasi, vol. 20, no. 2, hlm. 143–154, Jun 2021, doi: 10.32409/jikstik.20.2.368.
E. Mulyati, I. Numang, dan M. A. Nurdiansyah, “Usulan Tata Letak Gudang dengan Metode Shared Storage di PT. Agility International Customer PT. Herbalife Indonesia,” Jurnal Logistik Bisnis, vol. 10, no. 02, Nov 2020. [Daring]. Tersedia pada: https://ejurnal.poltekpos.ac.id/index.php/logistik/index.
I. A. Marie, C. Claudia, dan Adianto, “Optimasi Persediaan Bahan Baku Berdasarkan Pengali Lagrange Serta Rancangan Tata Letak Gudang Menggunakan Metode Shared Storage,” Jurnal Teknik Industri, vol. 10, no. 2, hlm. 105 – 112, Jul 2020.
Rosihin, Ma’arij, D. Cahyadi, dan Supriyadi, “Analisa Perbaikan Tata Letak Gudang Coil dengan Metode Class Based Storage,” Jurnal INTECH Teknik Industri Universitas Serang Raya, vol. 7, no. 2, hlm. 166–172, Des 2021, doi: 10.30656/intech.v7i2.4036.
J. Kemklyano, C. Harimurti, dan I. N. Purnaya, “Pengaruh Penerapan Metode Class Based Storage Terhadap Peningkatan Utilitas Gudang di PT Mata Panah Indonesia,” Jurnal Manajemen Logistik, vol. 1, no. 1, hlm. 1–10, Jan 2021. [Daring]. Tersedia pada: http://ojs.stiami.ac.id.
W. Setyawan, dan F. R. Fauzi, “Efektivitas Tata Letak Gudang Baru untuk Menekan Tingkat Kerusakan Produk Menggunakan Metode Class Based Storage,” Jurnal Media Teknik dan Sistem Industri, vol. 4, no. 2, hlm. 100–106, Sep 2020, doi: 10.35194/jmtsi.v4i2.1074.
I. Kurniawan, “Perbaikan Tata Letak Gudang pada PR Sukun Sigaret Menggunakan Metode Shared Storage”, 2014.
M. R. D. Pramono, “Perancangan Tata Letak Gudang Bahan Baku Dan Produk Akhir Menggunakan Metode Class-Based Storage”, 2020.
I. Sukoco, “Perancangan Tata Letak Gudang di PT. Panatrade dengan Menggunakan Metode Shared Storage”, 2017.
S. Wignjosoebroto, “Tata Letak Pabrik dan Pemindahan Bahan”, 2009.
N. D. Aryadipura, Rusindiyanto, dan E. Purnamawaty, “Usulan Perancangan Ulang Tata Letak Gudang Produk Jadi dan Bahan Baku dengan Metode Shared Storage di PT. Temprina Media Grafika Surabaya”, 2021.
A. Andriyanto, dan A. Nasroh, “Usulan Perbaikan Tata Letak Gudang Pada Divisi Finished Goods Warehouse di PT Global Dairi Alami Menggunakan Metode Shared Storage,” Jurnal Logistik Bisnis, vol. 12, no. 02, Des 2022, [Daring]. Tersedia pada: https://ejurnal.poltekpos.ac.id/index.php/logistik/index.
J. Arifin, dan T. Pamungkas, “Perbaikan Tata Letak Gudang dengan Menggunakan Metode Shared Storage Pada Perum Bulog Subdivre Karawang,” Jurnal Media Teknik dan Sistem Industri, vol. 3, no. 1, hlm. 7–14, 2019, [Daring]. Tersedia pada: http://jurnal.unsur.ac.id/index.php/JMTSI.
S. N. S Sidabutar, S. Ayu Kartika, dan E. Ramadhan, “Analisis Perancangan Ulang Tata Letak Material Pada Gudang dengan Menggunakan Metode Shared Storage,” Jurnal Teknik Mesin UNISKA, vol. 8, no. 1, Mei 2023.
A. Rizky, M. Ginting, dan A. C. Sembiring, “Perancangan Ulang Tata Letak Fasilitas Mesin Giling Jagung Menggunakan Metode Algoritma BLOCPLAN,” 2021.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
