Folding Trolley Manufacturing and Testing (Case Study in a Store or Mall)
Pembuatan dan Pengujian Troli Lipat Studi Kasus di Toko atau Mall
DOI:
https://doi.org/10.21070/ups.2442Keywords:
Trolley folding, Efficient, Load Compression Test, Trolley Height From The FloorAbstract
Manufacture of folding trolleys, with variations in compressive load from 35kgf to 100kgf, 245kgf and 875kgf. The results of the low load test, namely the compressive load of 35kgf to 100kgf, on the folding trolley there is no significant change in height, meaning that the height of the trolley with the ground/floor is still the same as before, namely 9 cm, and the trolley wheels are still intact/safe. While the results of the medium load compression test were 245kgf, the folding trolley had a bend in the middle of the trolley by 0.3cm, which means the height of the trolley with the floor was 8.7cm. Meanwhile, for the high load compression test, namely 875 kgf, the results obtained were that one component was damaged, namely a broken wheel. The final results show that this folding trolley can be used for compressed loads below 245kgf and can be folded.
Downloads
References
S. Sayuti and D. Y. Septian, “PERANCANGAN PEMBUATAN DAN PENGUJIAN TROLI PEMINDAH KENDARAAN (ALAT PARKIR KENDARAAN)”.
F. Hardiputra and A. Djafar, “PERANCANGAN AS RODA TROLI PEMANJAT TANGGA BERDASARKAN ANALISIS TEGANGAN DAN FAKTOR KEAMANAN,” 2018.
A. Bakar, “PERANCANGAN PRODUK TROLI YANG ERGONOMIS DENGAN MENGGUNAKAN METODE HOUSE OF QUALITY”.
M. S. Anggraini and H. Setiawan, “Perancangan Troli Galon Berbasis Ergonomic Function Deployment (EFD),” J. REKAYASA Ind. JRI, vol. 4, no. 1, pp. 20–28, Apr. 2022, doi: 10.37631/jri.v4i1.430.
M. Zyahri and H. Purnomo, “PENGEMBANGAN DESAIN PRODUK TROLLEY MENGGUNAKAN METODE KANO”.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
