Relayout of Forklift Repair Facilities Using the Activity Relationship Chart (ARC) Method and Area Allocation diagram (AAD)
Relayout Fasilitas Perbaikan Forklift dengan Mengunakan Metode Activity Relationship Chart (ARC) dan Area Allocation diagram (AAD)
DOI:
https://doi.org/10.21070/ups.2288Keywords:
Forklift, facility layout, Activity Relationship Chat (ARC), Analilysis Alocation Diagram (AAD)Abstract
PT Karya Mitra Teknik specializes in repairing and renting heavy equipment like trucks, cranes, and forklifts. In 2022, the company faced challenges as forklift repair work took a month due to inefficient facility layout. The delay was attributed to lengthy transfers between departments. To address this, a study aimed to pinpoint issues in the workshop's repair process and propose layout changes. The Activity Relationship Chart (ARC) and Analysis Allocation Diagram (AAD) methods were employed to diagnose problems and optimize each area's layout based on proximity. The study successfully led to an improved layout, reducing the total distance traveled during repairs from 110 meters to 55 meters. This optimization streamlined the repair workflow, minimizing delays caused by inter-departmental transfers. The changes brought efficiency to PT Karya Mitra Teknik's repair facilities, enhancing overall operational effectiveness.
Downloads
References
A. Halim, I. Anshory, and J. Jamaaluddin, “Sistem Pendeteksi Mundur Dan Manuver Pada Forklift Menggunakan Sensor Ultrasonik Berbasis Arduino,” Cyclotron, vol. 2, no. 2, pp. 13–17, 2019, doi: 10.30651/cl.v2i2.3255.
A. A. Maulina Pramesti, Heru Santoso Hadi Subagyo, “Perencanaan Ulang Tata Letak Fasilitas Produksi (Pramesti et al.) 149,” J. Sos. Ekon. dan Kebijak. Pertan., vol. 3, no. 2, pp. 150–164, 2019.
A. Ahmad and U. Nugeroho, “Jurnal Optimasi Teknik Industri Usulan Perbaikan Tata Letak Fasilitas Pabrik Tahu dengan Metode Systematic Layout Planning,” pp. 65–69, 2021.
A. D. Budianto and A. S. Cahyana, “Re-Layout Tata Letak Fasilitas Produksi Imitasi Pvc Dengan Menggunakan Metode Systematic Layout Planning Dan Blocplan,” J. Ilm. Din. Tek., no. 2, pp. 23–32, 2021, [Online]. Available: https://www.unisbank.ac.id/ojs/index.php/ft1/article/view/8738
Susanto, “DENGAN MENGGUNAKAN METODE ALGORITMA CRAFT Teknik Industri Fakultas Teknologi Industri Universitas Pembangunan Nasional ‘ Veteran ’ Jawa Timur Email : Febri.ekosusanto@gmail.com Pekerjaan merancang tata letak fasilitas seringkali dikira hanya berhubungan d,” vol. 3, no. 2, pp. 1–13, 2019.
Y. T. Prasetyo and A. F. Fudhla, “Layout Improvement with Dedicated Storage Approach in Food and Baverage Product Warehouse Perbaikan Tata Letak Fasilitas Gudang Dengan Pendekatan Dedicated Storage Pada Gudang Distribusi Barang Jadi Industri Makanan Ringan Layout Improvement with Dedicated Storage Approach in Food and Baverage Product Warehouse,” no. June, 2021, doi: 10.24014/jti.v7i1.11283.
A. F. Islaha and A. S. Cahyana, “Upaya Peningkatan Produktivitas Dengan Meminimasi Waste Menggunakan From To Chart (FTC),” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 1, no. 2, pp. 107–115, 2017, doi: 10.21070/prozima.v1i2.1289.
R. E. Hidayat and B. I. Putra, “Re-Layout Tata Letak Gudang Material Menggunakan Metode Dedicated Storage Pada Gudang PT . ABC,” vol. 3, no. 2, pp. 49–54, 2019.
Jamalludin, A. Fauzi, and H. Ramadhan, “Metode Activity Relationship Chart (Arc) Untuk Analisis Perancangan Tata Letak Fasilitas Pada Bengkel Nusantara Depok,” Bull. Appl. Ind. Eng. Theory, vol. 2, no. 1, pp. 20–22, 2020.
B. Saputra, Z. Arifin, and A. Merjani, “Juli 2020 IMPROVEMENT OF FACILITY LAYOUT USING SYSTEMATIC LAYOUT PLANNING ( SLP ) METHOD TO REDUCE MATERIAL MOVEMENT DISTANCE ( CASE STUDY AT UKM KERUPUK KAROMAH ) E-ISSN 2598-9987 Identifikasi Masalah Tujuan Penelitian Sesuai dengan perumusan masalah ter,” vol. 8, no. 1, 2020.
M. R. Rosyidi, “Analisa Tata Letak Fasilitas Produksi Dengan Metode Arc, Ard, Dan Aad Di Pt. Xyz,” WAKTU J. Tek. UNIPA, vol. 16, no. 1, pp. 82–95, 2018, doi: 10.36456/waktu.v16i1.1493.
S. N. Irrawan, R. A. Simanjuntak, and M. Yusuf, “ISSN : 2338-7750 Institut Sains & Teknologi AKPRIND Yogyakarta Jurnal REKAVASI ISSN :,” J. REKAVASI, vol. 7, no. 1, 2019.
L. A. Suminar, W. Wahyudin, and B. Nugraha, “Analisis Perancangan Tata Letak Pabrik Pt. Xyz Dengan Metode Activity Relationship Chart (Arc),” J. Sains dan Teknol. J. Keilmuan dan Apl. Teknol. Ind., vol. 20, no. 2, p. 181, 2020, doi: 10.36275/stsp.v20i2.276.
Sofyan, “RELAYOUT GUDANG BARANG JADI UNTUK MEMAKSIMALKAN KAPASITAS PRODUK JADI DENGAN MENGGUNAKAN METODE ACTIVITY RELATION CHART DAN SHARED STORAGE,” pp. 185–197, 2015.
Yukistio, “PERANCANGAN ULANG TATA LETAK DISPLAY RETAIL FASHION MENGGUNAKAN ACTIVITY RELATIONSHIP CHART (ARC),” vol. 10, no. 1, pp. 21–30, 2022.
R. A. Simanjuntak, E. W. Asih, and F. Winardi, “USULAN PERBAIKAN TATA LETAK FASILITAS PRODUKSI KAYU OLAHAN MENGGUNAKAN METODE ACTIVITY RELATIONSHIP CHART , CRAFT DAN FROM TO,” no. November, pp. 10–17, 2022.
B. I. A. Muttaqin1, U. Asfari2, H. Mardhiana3, S. Adhitya, Shamaradewa4, and Gagas Putra Dawangga5, “Jurnal iptek,” 3D Virtual Prototyp. Improv. Phase Work. Facil. Des. A Case Study CV. XYZ, vol. Vol.25 No., p. 70, 2021, doi: 10.31284/j.iptek.2021.v25i1.1164.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
