Halal Risk Analysis on Cosmetic Products with Fuzzy Failure Mode Effect Analysis (F-FMEA) and Fault Tree Analysis (FTA) Methods
Analisis Risiko Halal pada Produk Kosmetik dengan Metode Fuzzy Failure Mode Effect Analysis (F-FMEA) dan Fault Tree Analysis (FTA)
DOI:
https://doi.org/10.21070/ups.2152Keywords:
Halal Risk, Cosmetics, Fuzzy FMEA, FTAAbstract
PT. XYZ is a manufacturing industry engaged in cosmetics and skincare. There are maklon products that do not have halal certification, namely only 4 out of 151 maklon products that already have halal certification, so only 2.6% have halal certification and 97.4% do not have halal certification. The proper method used in this study is the Fuzzy FMEA and FTA methods. The purpose of this research is to determine the halal critical points, determine the priority of the highest halal critical points, and provide recommendations for improvements to the company. The research results show that the highest halal risk is the delivery process mixed with non-halal packages with an FRPN value of 10.74 in the Very High (VH) category. The results of recommendations for improvement are to improve the SOP in accordance with SJPH, to provide a partition that distinguishes between halal and non-halal products, and to check before shipping.
Downloads
References
N. De Nastiti and L. A. Perguna, “KONSTRUKSI KONSUMEN MUSLIM TERHADAP LABELLING HALAL PADA PRODUK KOSMETIK (STUDI FENOMENOLOGI PENGGUNAAN KOSMETIK HALAL DI KALANGAN MAHASISWI DI KOTA MALANG,” J. Anal. Sosiol., vol. 9, no. 1, pp. 197–211, May 2020, doi: 10.20961/jas.v9i1.37671.
E. Yulia and N. S. S. Ambarwati, DASAR DASAR KOSMETIKA UNTUK TATA RIAS, Edisi Pert. Jakarta: Lembaga Pengembangan Pendidikan UNJ, 2015.
L. Biati, R. Suprapto, Mamlukhah, and S. Muliana, “PENGARUH KUALITAS PRODUK HALAL DAN RELIGIUSITAS TERHADAP MINAT BELI KONSUMEN PRODUK KOSMETIK WARDAH MAHASISWI IAIDA BLOKAGUNG KARANGDORO TEGALSARI BANYUWANGI,” J. Ekon. Syariah Darussalam, vol. 3, no. 2, pp. 148–159, 2022.
A. Risdiyani, “PENGARUH HALAL KNOWLEDGE, ISLAMIC RELIGIOSITY, DAN HALAL LIFESTYLE TERHADAP PENILAIAN PRODUK KOSMETIK DAN KEPUTUSAN PEMBELIAN KOSMETIK HALAL,” Cross-border, vol. 6, no. 1, pp. 95–106, 2023.
D. T. Candra and F. A. Yuliansyah, “Membuat Brand Kosmetik dengan cara Maklon kosmetik,” HUBISINTEK, vol. 2, no. 1, pp. 612–615, 2022.
R. A. Moore, J. W. Rudolf, and R. L. Schmidt, “Risk Analysis for Quality Control Part 2: Theoretical Foundations for Risk Analysis,” J. Appl. Lab. Med., vol. 8, no. 1, pp. 23–33, 2023, doi: 10.1093/jalm/jfac106.
A. F. Rumpuin, D. Wahjudi, and D. Prayogo, “PENGEMBANGAN MODEL MITIGASI RISIKO KETERLAMBATAN PROYEK BERBASIS FAILURE MODE AND EFFECT ANALYSIS: STUDI KASUS DI PT X,” Dimens. Utama Tek. Sipil, vol. 7, no. 1, pp. 47–58, 2020, doi: 10.9744/duts.7.1.47-58.
H. C. Wahyuni, B. I. Putra, P. Handayani, and W. U. Maulidah, “Risk Assessment and Mitigation Strategy in The Halal Food Supply Chain in The Covid-19 Pandemic,” J. Ilm. Tek. Ind., vol. 20, no. 1, pp. 1–8, 2021, doi: 10.23917/jiti.v20i1.12973.
L. P. S. Hartanti, J. Mulyono, and V. Mayang, “FMEA dan Fuzzy FMEA dalam Penilaian Risiko Lean Waste di Industri Manufaktur,” JST (Jurnal Sains dan Teknol., vol. 11, no. 2, pp. 293–304, 2022, doi: 10.23887/jstundiksha.v11i2.50552.
D. P. P. Astuti and Mashuri, “PENERAPAN METODE FUZZY TSUKAMOTO DAN FUZZY SUGENO DALAM PENENTUAN HARGA JUAL SEPEDA MOTOR,” Unnes J. Math., vol. 9, no. 2, pp. 74–78, 2020, [Online]. Available: http://journal.unnes.ac.id/sju/index.php/ujme
A. Wicaksono and F. Yuamita, “Pengendalian Kualitas Produksi Sarden Mengunakan Metode Failure Mode And Effect Analysis (FMEA) Dan Fault Tree Analysis (FTA) Untuk Meminimalkan Cacat Kaleng Di PT XYZ,” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. 3, pp. 145–154, 2022, doi: 10.55826/tmit.v1iiii.44.
A. I. D. Mede, W. Roessali, and S. Nurfadilah, “Analisis Risiko Produksi Karet Ribbed Smoked Sheet ( Studi Kasus di Kebun Merbuh , PTPN IX ),” LITBANG, vol. 19, no. 1, pp. 57–70, 2021.
S. Sucipto, D. R. L. Putra, and M. Effendi, “Analisis Risiko Produksi Daging Sapi di Rumah Potong Hewan Menggunakan Metode Fuzzy FMEA (Studi Kasus di RPH X),” J. Agroindustri Halal, vol. 4, no. 2, pp. 130–141, 2018, doi: 10.30997/jah.v4i2.1248.
R. Septifani, I. Santoso, and Z. Pahlevi, “ANALISIS RISIKO PRODUKSI FRESTEA MENGGUNAKAN FUZZY FAILURE MODE AND EFFECT ANALYSIS (FUZZY FMEA) DAN FUZZY ANALYTICAL HIERARCHY PROCESS (FUZZY AHP) (STUDI KASUS DI PT. COCA-COLA BOTTLING INDONESIA BANDUNG PLANT),” Proc. Natl., vol. 2, pp. 13–21, 2018.
W. Kurniawan, D. K. Sari, and F. Sabrina, “Perbaikan Kualitas Menggunakan Metode Failure Mode and Effect Analysis Dan Fault Tree Analysis pada Produk Punch Extruding Red di PT. Jaya Mandiri Indotech,” EKOMBIS Rev. J. Ilm. Ekon. dan Bisnis, vol. 10, no. 1, pp. 152–166, 2022, doi: 10.37676/ekombis.v10i1.1748.
Y. N. Safrudin and T. Rahman, “Analisis Penyebab Cacat dan Usulan Perbaikan dengan Metode Fault Tree Analysis pada Proses Drawing di PT. XYZ,” J. Rekayasa Sist. dan Ind., vol. 8, no. 1, pp. 55–62, 2021.
B. A. Kinanti, T. Pujianto, and R. Kastaman, “Analisis Titik Kritis Halal pada Proses Produksi di Komunitas UKM Aksara Cimahi Menggunakan Failure Mode Effect Analysis (FMEA),” J. Ekon. Pertan. dan Agribisnis, vol. 4, no. 4, pp. 738–751, 2020.
N. F. Fatma and D. E. M. Putra, “Usulan Perbaikan Pada Penerapan Sistem Manajemen Keselamatan Dan Kesehatan Kerja Di PT. Surya Toto Indonesia Tbk Divisi Sanitary Dengan Metode HIRA Dan FTA,” J. Ind. Manuf., vol. 6, no. 1, pp. 27–42, 2021.
S. Prabowo, Ed., Modul Pelatihan Sistem Jaminan Halal Berdasarkan HAS 23000. Samarinda: LPPOM MUI Provinsi Kalimantan Timur, 2014.
G. R. Hosianna, S. Hasibuan, and J. Hidayati, “Analisa Risiko Rantai Pasok Produk Kosmetik Sistem Make to Order Dengan Metode House of Risk,” Oper. Excell. J. Appl. Ind. Eng., vol. 13, no. 3, pp. 288–297, 2021, doi: 10.22441/oe.2021.v13.i3.027.
A. Ariffien, I. Adriant, and Y. B. Sinuhaji, “OPTIMASI PROSES DISTRIBUSI SAYURAN SEGAR DENGAN PENDEKATAN LEAN DISTRIBUTION PADA PT . BIMANDIRI,” vol. 5, no. 2, pp. 99–109, 2019.
A. E. Wahyuni and A. Rais, “Identifikasi Waste Pada Proses Operasional Shipping Dengan VSM (Value Stream Mapping) Pada PT XYZ,” J. Tek. Ind., vol. 9, no. 3, pp. 161–166, 2019, doi: 10.25105/jti.v9i3.6573.
A. Susanto, A. Ginantaka1a, and D. Delfitriani, “Perancangan Sistem Jaminan Halal Produk Hand Sanitizer di PT. XYZ Design of Halal Assurance System of Hand Sanitizer Product in PT. XYZ,” J. Agroindustri Halal, vol. 8, no. 1, pp. 33–43, 2022.
N. Izzah and M. F. Rozi, “Analisis Pengendalian Kualitas Dengan Metode Six Sigma-Dmaic dalam Upaya Mengurangi Kecacatan Produk Rebana pada UKM Alfiya Rebana Gresik,” J. Ilm. Soulmath J. Edukasi Pendidik. Mat., vol. 7, no. 1, pp. 13–25, 2019, doi: 10.25139/smj.v7i1.1234.
D. Azis and R. Vikaliana, “PENGENDALIAN KUALITAS PRODUK MENGGUNAKAN PENDEKATAN SIX SIGMA DAN KAIZEN SEBAGAI UPAYA PENGURANGAN KECACATAN PRODUK,” vol. 6, no. 1, pp. 37–53, 2023.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
