Equipment Dried Beef Dendeng With Wemos Microcontroller
Alat Pengering Dendeng Sapi Berbasis Mikrokontroler Wemos
DOI:
https://doi.org/10.21070/ups.1687Keywords:
Dendeng, Microcontoller Wemos, AndroidAbstract
Dendeng is a very well known intermediate-moisture meat product in Indonesian. This product has long shelf-life. In general, the meat used to make beef dendeng is beef. Dendeng drying system that still uses the technique of drying under direct sunlight also has many obstacles. So the purpose of making this beef dendeng dryer is as an increase in the productivity of drying beef dendeng and improving quality. The use of this dryer is also done in order to condition the temperature and drying time which is more stable and can be controlled. This tool uses an android-based wemos microcontroller as a control and monitoring system. Control the drying system automatically using a microcontroller and monitor the process also remotely can be done only by using a smartphone or android. Expected that the processed results from the process can be better than the old way that still utilizes sunlight.
Downloads
References
Direktorat Jenderal Peternakan dan Kesehatan Hewan, Statistik Peternakan dan Kesehatan Hewan 2018/ Livestock and Animal Health Statistics 2018. 2018.
J. T. Pangan and D. Gizi-Ipb, “Pembuatan Dendeng,” Tekno Pangan 8 Agroindustri, vol. 1, no. 4, pp. 56–57.
Hamida Erven, “Oksidasi Lemak Pada Dendeng Kering Oven Selama Penyimpanan Yang Di Uji Setelah Mengalami Penggorengan,” p. 56, 2010.
S. Pengajar, J. Teknk, and P. N. Padang, “PENGERINGAN DENDENG SAPI TENAGA SURYA MODEL KABINET BERSIRKULASI ALAMI,” J. Tek. Mesin, vol. 3, no. 1, pp. 2–6, 2006.
Jacky Daisa, “Teknik Pengawetan dengan Pengeringan,” Riau Univ., vol. 4, no. 3, pp. 117–194, 2012.
I. F. YULIDA and M. ILHAM, “ANALISA PANGAN DAN HASIL PENENTUAN KADAR AIR,” 2016.
D. Junaidi and Y. D. Prabowo, Project Sistem Kendali Elektronik. 2018.
H. Artanto, “TRAINER IOT BERBASIS ESP8266 SEBAGAI MEDIA PEMBELAJARAN MATA KULIAH KOMUNIKASI DATA DAN INTERFACE DI PROGRAM STUDI PENDIDIKAN TEKNIK ELEKTRONIKA UNY,” Tugas Akhir, vol. 1, no. 2, pp. 19–43, 2018, doi: 10.1051/matecconf/201712107005.
M. F. Alrizal, “RANCANG BANGUN ALAT UKUR TINGKAT KEKERUHAN AIR PADA ALAT PURIFIKASI AIR MENGGUNAKAN SENSOR TURBIDITY BERBASIS MIKROKONTROLER,” Fis. Tek., pp. 13–17, 2019.
N. Hidayati, L. Dewi, M. F. Rohmah, and S. Zahara, “Prototype Smart Home Dengan Modul NodeMCU ESP8266 Berbasis Internet of Things (IoT),” Tek. Inform. Univ. Islam Majapahit, pp. 1–9, 2018.
M. A. Sahuri, D. Hadidjaja, A. Wisaksono, and J. Jamaaluddin, “Rancang Bangun Alat Monitoring Kondisi Suhu Tubuh Dan Jantung Pasien Saat Perawatan Berbasis Internet of Things (Iot),” Dinamik, vol. 26, no. 2, pp. 68–79, 2021, doi: 10.35315/dinamik.v26i2.8691.
Fitri Puspasari, Trias Prima Satya, Unan Yusmaniar Oktiawati, Imam Fahrurrozi, and Hristina Prisyanti, “Analisis Akurasi Sistem Sensor DHT22berbasis Arduino terhadap Thermohygrometer Standar,” J. Fis. dan Apl., vol. 40, no. 45, p. 33, 2020.
J. E. Candra and A. Maulana, “Penerapan Soil Moisture Sensor Untuk Desain System Penyiram Tanaman Otomatis,” Snistek, vol. 2, no. September, pp. 109–114, 2019.
M. Meriadi, S. Meliala, and M. Muhammad, “Perencanaan Dan Pembuatan Alat Pengering Biji Coklat Dengan Wadah Putar Menggunakan Pemanas Listrik,” J. Energi Elektr., vol. 7, no. 2, p. 47, 2018, doi: 10.29103/jee.v7i2.1061.
A. G. Ekayana, “Rancang Bangun Alat Pengering Rumput Laut,” J. Pendidik. Teknol. dan Kejuru., vol. 13, no. 1, pp. 1–12, 2016.
F. B. Setiawan, M. Rizqiyanto, and J. U. M. Yiwa, “Oven Terprogram Berbasis Miktrokontroler,” Widya Tek., vol. 21, no. 2, pp. 10–14, 2013.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
