Preprint has been published in a journal as an article
Preprint / Version 1

Electric Motor Vibration Monitoring Tool Induction 1 Phase Internet of Think (IoT) Based


Alat Monitoring Getaran Motor Listrik Induksi 1 Phase Berbasis Internet of Think (IoT)

##article.authors##

  • Muchammad Zainal Bisri Universitas Muhammadiyah Sidoarjo
  • Izza Anzhory Universitas Muhammadiyah Sidoarjo

DOI:

https://doi.org/10.21070/ups.1332

Keywords:

Electric Motor, Vibration, Motor Rotation, Vibration Sensor, Adxl 335 Sensor

Abstract

Electric motors are widely used in industry. To find out the damage, it can be detected from the temperature, vibration and current. Changes in temperature, vibration and abnormal electric current of the motor occur due to damage including damage to the bearings, load imbalance, miss alignment, failure of insulation in the motor windings and others. This study aims to design an internet of things (IoT) based vibration and rotation monitoring tool for electric motors. This research can be used to help detect early damage to electric motors which can cause vibration patterns and rotation tends to increase, so that it can support maintenance programs on electric motors. The equipment consists of an Adxl 335 vibration sensor. In order for the tool to work as desired, vibration testing and electric motor rotation are set on the electric motor body.

Downloads

Download data is not yet available.

References

kurvatek, rekayasa peralatan pendeteksi dini kerusakan pada motor listrik berbasis komputer, Yogyakarta: 2016, 2016, p. vol.1 no.1.

EKSERGI, JURNAL TEKNIK ENERGI, 2017, 2017.

A. D. A. O. C. PATTIPAWAEJ, TERHADAP KONSENTRASI PEKERJA, 2016.

KURVATEK, REKAYASA PERALATAN PENDETEKSI DINI KERUSAKAN PADA MOTOR LISTRIK BERBASIS KOMPUTER, 2016.

J. T. M. S-1, DIAGNOSA KERUSAKAN MOTOR INDUKSI DENGAN SINYAL GETARAN, 2014.

“ANALISA GETARAN AKIBAT KERUSAKAN DEEP GROOVE BALL BEARING SERI 6003RS”, jurnal manutech, pp. 42-88, 2017.

G. R. W. Royan Hidayat, “ANALISIS GETARAN PADA KOMPRESOR MESIN PENDINGIN DENGAN VARIASI PUTARAN (RPM)”, vol.15, 2017.

Wingjosoebroto, Ergonomi, Studi Gerak Dan Waktu, Jakarta: kanisius, 2000.

S. Wignjosoebroto, Ergonomi Studi Gerak dan Waktu Teknik Analisis untuk Peningkatan Produktivitas Kerja, Jakarta: Guna Widya, 1995.

S. Sastrowinoto, Meningkatkan produktivitas dengan ergonomi, Jakarta: Pertja, 1985.

H. J. Goldsmid, Thermoelectric Refrigeration, New York: Plenum Press, 1964.

Suhariningsih, "Rancang Motor Listrik," Jurnal Teknik Elektro, 2012.

M. F. Wicaksono, Mudah Belajar Mikrokontroler Arduino, Bandung: Informatika Bandung, 2017.

M. Electronics, "Mouser Electronics," OSEPP Electronics, 14 Maret 1983. [Online]. Available: https://www.mouser.com/datasheet/2/758/DHT11-Technical-Data-Sheet-Translated-Version-1143054.pdf. [Accessed 02 januari 2021].

"ROHM SEMICONDUCTOR," April 2010. [Online]. Available: https://pdf1.alldatasheet.com/datasheet-pdf/view/350139/ROHM/BH1750FVI.html. [Accessed 21 Februari 2021].

A. D. K. S. Samsugi, "Arduino Dan Modul Wifi Esp8266sebagai Media Kendali Jarak Jauh Dengan Antarmuka Berbasis Android," Jurnal TEKNOINFO, vol. 12, pp. 23-27, 2018.

Posted

2023-05-30