DOI of the published article https://doi.org/10.31284/p.snestik.2023.4159
Prototype of Monitoring Equipment Measuring Volume and Load Weight on Truck Based on IoT
Prototype Alat Monitoring Mengukur Volume dan Berat Muatan Pada Truk Berbasis IoT
DOI:
https://doi.org/10.21070/ups.1218Keywords:
Googlesheet, Loadcell, NodeMCU ESP8266, RFID, Ultrasonic SRF-04, VolumeAbstract
Currently, technology is developing very rapidly following an increasingly advanced era. Some examples of the development of technology is the calculation of goods automatically. Many companies are currently carrying out overloading or what is commonly known as overloading, which can endanger the vehicle and the driver of the loaded vehicle itself. By knowing the volume of the vehicle's body, the company can make a standard load weight that fits the vehicle. From these problems, a tool is needed to monitor the volume of the cargo tank and the weight of the load on IoT-based vehicles with RFID as a data collection tool, this tool can make it easier for companies to control the cargo to be sent. This reduces the risk of overloading the vehicle. The purpose of this research is to make a prototype of an IoT-based load monitoring tool for volume and weight.
Downloads
References
F. Adibrata, “Monitoring Sistem Penghitungan Barang Otomatis Menggunakan Nodemcuesp8266 Monitoring Sistem Penghitungan Barang Otomatis Menggunakan Nodemcuesp8266,” 2020.
D. Kuriando, A. Noertjahyana, dan R. Lim, “Pendeteksi Volume Air pada Galon Berbasis Internet of Things dengan Menggunakan Arduino dan Android,” J. Petra, vol. d, hal. 2–7, 2017.
Z. Nadizf et al., “Rancang Bangun Penyiraman Otomatis Untuk Tanaman Hias Berbasis Mikrokontroler ESP8266,” vol. 8, no. 4, hal. 2119–2130, 2021.
A. Wisaksono dan C. A. Ragil, “Design and Development of Parking Motor Parking Information System at Muhammadiyah University, Sidoarjo,” IOP Conf. Ser. Mater. Sci. Eng., vol. 874, no. 1, 2020.
R. Bangun, P. Penggunaan, E. Pada, dan G. Bertingkat, “Design of Monitoring and Control of Energy Use in Multi-storey Buildings based on IoT,” vol. 4, no. 2, hal. 128–135, 2020.
M. A. Fauzi dan E. U. Armin, “Sistem Tilang Otomatis Jembatan Timbang Menggunakan Node MCU,” 2021.
S. F. Arianti, A. Silaen, A. Sitinjak, dan C. Sitompul, “Rancang Bangun Alat Pengukur Berat Muatan Truk dengan Strain gauge,” vol. 02, no. 01, 2021.
J. Ardiansyah, “Rancang Bangun Alat Ukur Volume Air Pada Wadah Menggunakan Ssensor Ultrasonic HC-SR04 Berbasis Arduino,” 2018.
F. Puspasari et al., “Sensor Ultrasonik HCSR04 Berbasis Arduino Due untuk Sistem Monitoring Ketinggian,” hal. 2–5, 2019.
F. Teknik, P. Studi, T. Elektro, U. Widya, dan D. Klaten, “KOMPARASI SENSOR ULTRASONIK HC-SR04 DAN JSN-SR04T UNTUK,” vol. 10, no. 2, hal. 717–724, 2019.
M. F. Muttaqin, G. A. Mutiara, R. Handayani, dan F. I. Terapan, “RFID SISTEM PARKIR DENGAN USER PROFILER,” vol. 4, no. 2, hal. 502–509, 2018.
H. Kusumah dan R. A. Pradana, “Penerapan Trainer Interfacing Mikrokontroler Dan Internet of Things Berbasis Esp32 Pada Mata Kuliah Interfacing,” J. CERITA, vol. 5, no. 2, hal. 120–134, 2019.
F. W. Perdana, S. D. Ayuni, A. Wisaksono, dan S. Syahrorini, “Prototype Social Distancing Reminder Using HC-SR04 Sensor At The Payment Counter Via A Smartphone,” Procedia Eng. Life Sci., vol. 1, no. 2, 2021.
M. A. BASITH, “Penerapan Sensor Ultrasonik Hc-Sr04 Pada Sistem Pengukur Volume Pada Mobil Tangki Air Bersih,” Jte, vol. 8, no. 2, hal. 25–34, 2017.
R. T. Setiawan ade Hasbi, “Perancangan Pengisian Dan Penghitungan Galon Air Otomatis Menggunakan Mikrokrotoler AT8535,” Ed. Mei, vol. 6, no. 1, hal. 23–27, 2018.
A. Azura, L. Elektronika, dan J. Fisika, “RFID dengan Database MySQL XAMPP dan Interface Visual Basic,” vol. 7, no. 2, hal. 186–193, 2018.
I. Handayani, H. Kusumahati, dan A. N. Badriah, “Pemanfaatan Google Spreadsheet Sebagai Media Pembuatan Dashboard pada Official Site iFacility di Perguruan Tinggi,” Sisfotenika, vol. 7, no. 2, hal. 177, 2017.
A. S. Samosir, N. I. Tohir, dan A. Haris, “Rancang Bangun Catu Daya Digital Menggunakan Buck Converter Berbasis Mikrokontroler Arduino,” Jur. Tek. Elektro, Fak. Tek. Univ. Lampung, vol. 11, hal. 1–94, 2017.
Enny, “Optimalisasi Penggunaan Alat Praktikum Power Supply Switching dengan Menggunakan Topologi Half Bridge Konverter sebagai Alat Bantu Praktikum Elektronika Analog,” Metana, vol. 12, no. 1, hal. 1–8, 2018.
B. A. B. Ii dan P. Volume, “18 . 19 .,” hal. 12–30.
I. Sulistiyowati dan M. I. Muhyiddin, “Disinfectant Spraying Robot to Prevent the Transmission of the Covid-19 Virus Based on the Internet of Things ( IoT ),” vol. 5, no. 2, hal. 61–67, 2021.
Downloads
Additional Files
Posted
License
Copyright (c) 2023 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
