Failure Mode And Effects Analysis and Fault Tree Analysis for Embroidery Potential Risk Analysis
Failure Mode And Effects Analysis dan Fault Tree Analysis untuk Analisis Potensi Risiko Bordir
DOI:
https://doi.org/10.21070/ups.11226Keywords:
Product Reject, FMEA, FTA, Embroidery, RPNAbstract
The background of this study is the high level of product rejection in the embroidery production process, which exceeds the maximum standard by 2%. Based on data for three months, namely October to December 2025, the figure exceeds 2%. The purpose of this study is to identify the highest type of rejection, determine the highest Risk Priority Number (RPN) value, analyze the root cause of failure, and provide recommendations to repair. The method used is the integration of Failure Modes and Effects Analysis (FMEA) and Fault Tree Analysis (FTA). The FMEA method is a method to measure the level of risk, and FTA is used to identify the root cause of the problem. The results of the study show that the highest rejection is the remaining excess thread. Meanwhile, the highest RPN value of 240 occurs at the product design stage, with a color failure mode that does not match.
Downloads
References
M. Nuryanti and Suparjiman, “Analisis Manajemen Risiko pada UMKM Konveksi , Rancaekek , Kabupaten Bandung,” J. Ekon. dan Manaj., vol. 2, no. 1, pp. 1654–1667, 2025.
S. Humaniora, “M E T R I K : Serial Humaniora dan M E T R I K : Serial Humaniora dan Sains,” 2025.
S. Purwati and S. Mukarromah, “Journal of Community Service in Education,” Penyul. Strateg. Pemasar. untuk Pengemb. UMKM Konveksi, vol. 2, no. 2, pp. 58–65, 2022.
A. K. Rahman and M. Nuruddin, “JUTIN : Jurnal Teknik Industri Terintegrasi Analisis Resiko pada Operasional Konveksi PT . Alam Pelangi Jaya Memakai Metode House of Risk,” Anal. Resiko pada Oper. Konveksi PT. Alam Pelangi Jaya Memakai Metod. House Risk, vol. 6, no. 4, pp. 1425–1435, 2023.
A. Dahlan and E. B. Leksono, “METODE RISK MANAGEMENT DENGAN PENDEKATAN FMEA DAN FTA,” IDENTIFIKASI DAN Anal. RISIKO Oper. PADA Div. PRODUKSI Perusah. VULKANISIR BAN MENGGUNAKAN Metod. RISK Manag. DENGAN PENDEKATAN FMEA DAN FTA, vol. 2, no. 1, pp. 44–61, 2021, doi: 2.
A. Bukoi and A. Sutrisno, “PENERAPAN METODE FAILURE MODE AND EFFECT ANALYSIS PADA PELAYANAN SEKTOR PUBLIK ( STUDI KASUS PASAR TRADISIONAL ) Jurnal Tekno Mesin / Volume 10 Nomor 1,” PENERAPAN Metod. Fail. MODE Eff. Anal. PADA PELAYANAN Sekt. PUBLIK (STUDI KASUS PASAR TRADISIONAL), vol. 10, no. 2776–5989, pp. 48–57, 2024.
F. S. Nisa and D. Herwanto, “Analisis Kecacatan Produk Menggunakan Metode Failure Mode Effect Analysis Pada Konveksi Boneka,” Anal. Kecacatan Prod. Menggunakan Metod. Fail. Mode Eff. Anal. Pada Konveksi Boneka, vol. VIII, no. 2, pp. 5956–5962, 2023.
M. Firmansyah and A. W. Rizqi, “Analisis Perawatan Mesin dengan Metode Reliability Centered Maintenance (RCM) terhadap Mesin Bag Inserter (FLEXIM),” G-Tech J. Teknol. Terap., vol. 8, no. 4, pp. 2514–2521, 2024, doi: 10.70609/gtech.v8i4.5235.
H. C. Wahyuni and M. A. Rosid, “Jurnal Penelitian Teknik,” Desain Teknol. blockchain berdasarkan Anal. risiko keamanan pangan dan halal dalam rantai pasokan daging sapi dengan FMEA-FTA. Hana, vol. 13, pp. 590–595, 2025.
D. A. Safitri and Nelfiyanti, “Analisis Risiko Operasional Produksi Pada Home Industry Konveksi Dengan Metode FAILURE MODE AND EFFECTS ANALYSIS (FMEA),” Anal. Resiko Oper. Produksi Pada Home Ind. Konveksi Dengan Metod. Fail. MODE Eff. Anal., pp. 1–10, 2025.
W. Amalia, D. Ramadian, and S. N. Hidayat, “Analisis Kerusakan Mesin Sterilizer Pabrik Kelapa Sawit Menggunakan Failure Modes and Effect Analysis (FMEA),” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 8, no. 2, p. 369, 2022, doi: 10.24014/jti.v8i2.19179.
M. I. Romadhoni, D. Andesta, and Hidayat, “IDENTIFIKASI KECACATAN PRODUK KERANGKA BANGUNAN DI PT. RAVANA JAYA MENGGUNAKAN METODE FMEA DAN FTA,” J. Ind. Eng. Oper. Manag., vol. 05, no. 02, pp. 236–247, 2022.
M. Yazdi and J. Mohammadpour, “Peningkatan analisis pohon kesalahan : Analisis bibliometrik dan tinjauan pustaka Dia Li3,” Peningkatan Anal. Pohon kesalahan Anal. Bibliometr. dan Tinj. pustaka, no. November 2022, pp. 1639–1659, 2023, doi: 10.1002/qre.3271.
F. O. Ehiagwina, O. O. Kehinde, and A. S. Nafiu, “International Journal of Research Publication and Reviews Fault Tree Analysis and its Modifications as Tools for Reliability and Risk Analysis of Engineering Systems – An Overview,” Int. J. Res. Publ. Rev., vol. 3, no. 1, pp. 383–396, 2022.
A. Syarifudin and J. T. Putra, “ANALISA RISIKO KEGAGALAN KOMPONEN PADA EXCAVATOR KOMATSU 150LC DENGAN METODE FTA DAN FMEA DI PT . XY,” vol. 4, no. 2, pp. 99–108, 2021.
H. Aulawi and W. A. Kurniawan, “Analisis Risiko Kegagalan Proses Produksi Dodol Menggunakan Metode FTA, FMEA dan AHP,” Anal. Risiko Kegagalan Proses Produksi Dodol Menggunakan Metod. FTA, FMEA dan AHP, vol. 20, no. 2, pp. 102–112, 2022.
Downloads
Additional Files
Posted
Categories
License
Copyright (c) 2026 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
