Evaluation of Preventive Maintenance Schedule Using the Reliability Centered Maintenance Method to Improve Machine Reliability
Evaluasi Jadwal Preventive Maintenance Menggunakan Metode Reliability Centered Maintenance II Untuk Meningkatkan Reliability Mesin
DOI:
https://doi.org/10.21070/ups.11211Keywords:
Preventive Maintenance, Reliability Centered Maintenance (RCM) IIAbstract
PT IFH is a packaging box manufacturing company that faces problems in the maintenance system of the Rapida 106 printing machine, causing increased downtime and decreased machine reliability. This study aims to evaluate the effectiveness of preventive maintenance schedules and to develop more appropriate maintenance proposals using the Reliability Centered Maintenance II (RCM II) method. The methods used include Failure Mode and Effect Analysis (FMEA), goodness of fit testing, calculation of Mean Time Between Failure (MTBF), Mean Time To Repair (MTTR), Reliability, and Availability. The results show that the suction brake component has the highest Risk Priority Number (RPN) value of 125. The MTBF value obtained is 35,702 seconds and MTTR is 1.96 hours. Reliability increased from 43% to 86% after the proposed preventive maintenance interval was implemented. This study shows that the implementation of RCM II is able to improve machine reliability and reduce the risk of production downtime
Downloads
References
G. Muhaemin and A. E. Nugraha, “Penerapan Total Productive Maintenance (TPM) Pada Perawatan Mesin Cutter di PT. XYZ,” J. Ilm. Wahana Pendidik., vol. 8, no. 9, pp. 205–219, 2022.
R. M. Simanungkalit, S. Suliawati, and T. Hernawati, “Analisis Penerapan Sistem Perawatan dengan Menggunakan Metode Reliability Centered Maintenance (RCM) pada Cement Mill Type Tube Mill di PT Cemindo Gemilang Medan,” Blend Sains J. Tek., vol. 2, no. 1, pp. 72–83, 2023.
E. Firdah Lestari and S. Mundari, “Analisis Efektivitas Mesin Heidelberg SM72-FP dalam Upaya Meminimalisir Penyebab Downtime pada Perusahaan Offset Printing,” J. Surya Tek., vol. 11, no. 2, pp. 574–584, 2024.
M. D. Cahyono, F. Achmadi, and N. Y. Sari, “Menggunakan Metode Rcm Dan Ommp Pada Perusahaan Pt . Xyz,” J. Tekmapro, vol. 16, no. 01, pp. 48–58, 2022.
M. A. C. Roring, P. A. Ginoga, R. Ibrahim, R. C. Rompas, A. Yusupa, and S. D. E. Paturusi, “E-issn : 2988-1986,” Multidisiplin Saintek, vol. 8, no. 5, pp. 1–16, 2025.
I. B. Pamungkas, H. Rachmat, and A. Kurniawati, “Pengembangan Program Preventive Maintenance Dengan Menggunakan Metode Reliability Centered Maintenance (Rcm Ii) Dan Perhitungan Overall Equipment Effectiveness (Oee) Di Plant Ammonia Pt Pupuk Kujang 1a,” J. Rekayasa Sist. Ind., vol. 1, no. 01, pp. 99–105, 2023.
D. S. Dhamayanti, J. Alhilman, and N. Athari, “Usulan Preventive Maintenance Pada Mesin Komori Ls440 Dengan Menggunakan Metode Reliability Centered Maintenance (Rcm Ii) Dan Risk Based Maintenance (Rbm) Di Pt Abc,” J. Rekayasa Sist. Ind., vol. 3, no. 02, p. 31, 2023.
M. N. Ramadhan Siregar, “Implementasi Reliability Centered Maintenance Ii (RCM Ii) Dalam Penentuan Preventive Maintenance Pada Mesin Screw Press (Pressing),” no. Rcm Ii, 2024.
A. Amirudin et al., “Perencanaan Perawatan Mesin Dengan Metode Reliability Centered Maintenance II Di PT Naga Laut Timur,” vol. 2, no. 3, 2023.
H. Azhari, J. G. Ganap, and F. A. Nisah, “Analisis Perawatan Mesin Kapal dengan Metode Reliability Centered Maintenance (RCM) di PT Jasa Armada Indonesia Tbk,” Ind. J. Ilm. Tek. Ind., vol. 8, no. 2, pp. 407–417, 2024.
M. H. Aiman and M. Nuruddin, “Analisis Kecacatan Produk Pada Mesin Pemotongan Dengan Menggunakan Metode FMEA di UD. Abdi Rakyat,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 9, no. 2, p. 577, 2023.
R. H. Fadila, P. N. Sabrina, and H. Ashaury, “Refaktoring Untuk Meningkatkan Kualitas Reliabilitas Dan Correctness Pada Sistem Manajemen Sekolah Berbasis Web,” pp. 321–326, 2024.
T. Latifah Ahmad and R. Novitanto, “Analisis Performance Band Service Mesin Atb-I3 Dengan Perhitungan Availability,” J. Sains Ilmu Teknol. Ind. Ed., vol. 4, no. 2, pp. 1–9, 2024.
Joni Apriyanto, “Perancangan dan Penerapan Sistem Informasi Maintenance di PT. XYZ untuk Mengukur Kinerja Mesin,” INSOLOGI J. Sains dan Teknol., vol. 3, no. 4, pp. 399–411, 2024.
Downloads
Additional Files
Posted
Categories
License
Copyright (c) 2026 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
