Redesign of Spare Part Production Facility Layout Using the Activity Relationship Chart (ARC) and Blocplan Methods
Perancangan Ulang Tata Letak Fasilitas Produksi Sparepart Dengan Metode Activity Relationship Chart dan Blocplan
DOI:
https://doi.org/10.21070/ups.11175Keywords:
Fasility Layout, Activity Relationship Chart (ARC), Blocplan, SparepartAbstract
A spare parts company is a manufacturing company that produces components such as gears and rollers. The problem faced by the company lies in its production facility layout, where the production flow is not well organized, resulting in backtracking of material movement. This condition causes longer processing times between workstations and reduces production efficiency due to excessive material handling distances. Therefore, the objective of this study is to redesign the production facility layout to optimize material flow, reduce processing time, and improve production efficiency. The methods used in this study are the Activity Relationship Chart (ARC) to analyze the closeness relationships among activities and Blocplan to generate an optimal layout alternative. The results show that the total material handling distance in the initial layout was 103 meters, while the proposed layout reduced it to 18 meters.
Downloads
References
H. H. Ainun Ratu Ajizah, Fatimah Zahra Rito, “Analisis Tata Letak Pada PT. Rumah Rumput Laut Dengan Metode Activity Relationship Chart (ARC) dan Total Closeness Rating (TCR),” EKOMA J. Ekon. Manajemen, Akunt., vol. 4, no. 1, pp. 1606–1615, 2024.
A. Rachman, D. Widyaningrum, and A. W. Rizqi, “Perancangan Tata Letak Fasilitas Untuk Meminimalkan Jarak Material Handling Pada Pabrik Pupuk Organik PT. Petrokopindo Cipta Selaras Dengan Metode ARC Dan ARD,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 9, no. 1, p. 345, 2023.
M. Maulidah, P. Anggela, and I. Sujana, “Redesign Tata Letak Fasilitas Menggunakan Metode Activity Relationship Chart Dan Algoritma Blocplan Pada Pabrik Xyz,” J. Tek. Ind. Univ. Tanjungpura, vol. 6, no. 2, pp. 78–82, 2022,
W. Mubarok, M. Sagaf, A. Syakhroni, and D. Prianjani, “Evaluasi dan Perbaikan Tata Letak Lantai Produksi Menggunakan Metode BLOCPLAN: Studi Kasus PT. Laco Alam Jaya,” J. Multidiscip. Inq. Sci. Technol. Educ. Res., vol. 2, no. 2, pp. 3431–3445, 2025.
A. Shalihin and W. P. Anugerah, “Perbaikan Rancangan Tata Letak Fasilitas di UD. Surya Jaya Dengan Menggunakan Metode Activity Relationship Chart (ARC),” J. Talent. Conf. Ser. Energy Eng., vol. 5, no. 2, pp. 63–70, 2022, doi: 10.32734/ee.v5i2.1547.
Y. Muharni, “Perancangan Tata Letak Fasilitas Gudang Hot Strip Mill Menggunakan Metode Activity Relationship Chart dan Blocplan,” J. Tek. Ind. J. Has. Penelit. dan Karya Ilm. dalam Bid. Tek. Ind., vol. 8, no. 1, p. 44, 2022.
D. Salsabilla, “Usulan Perancangan Tata Letak Menggunakan Software Blocplan dengan Pendekatan Activity Relationship Chart (ARC),” J. Talent. Conf. Ser. Energy Eng. R, vol. 7, no. 1, 2024.
S. S. Anni Rohimah, Yogi Priyo Istiyono, Nuriyatul Fhatonah, Dina Pratiwi, Ahmad Sulthon Gozali, La Ode Akbar Rasydy, Banu Kuncoro, “Perancangan Tata Letak Fasilitas Ruang Pemeriksaan Kesehatan Menggunakan Activity Relationship Chart,” J. Inkofar, vol. 7, no. 2, pp. 153–163, 2024.
B. Arianto and W. T. Bhirawa, Buku Petunjuk Praktikum Perancangan Tata Letak Fasilitas, 1st ed. Jakarta: Universitas Dirgantara Marsekal Suryadarma, 2023.
A. Arda Yulistio, Mahmud Basuki, “Perancangan Ulang Tata Letak Display Retail Fashion Menggunakan Activity Relationship Chart (ARC),” J. Ilm. Tek. Ind., vol. 10, no. 1, pp. 21–30, 2022.
M. L. Pattiapon, “Perancangan Ulang Tata Letak Fasilitas Produksi Dengan Menggunakan Metode Algoritma Blocplan Guna Meminimasi Ongkos Material Handling,” J. Tek. Ind., vol. 15, no. 2, pp. 105–114, 2021.
B. Aulia et al., “Analisis Tata Letak Fasilitas Toko Prima Freshmart SV IPB Melalui Metode Activity Relationship Chart (ARC) Dan Total Closeness Rating (TCR),” J. Teknol. dan Manaj. Ind. Terap., vol. 2, no. 2, pp. 128–134, 2023.
M. Febri E. Susanto, Ir. Rusindayanto, “Analisa Perancangan Tata Letak Ulang Fasilitas Pabrik Dengan Menggunakan Metode Algoritma Craft Di PT. Fokus Ciptamakmur Bersama, Blitar,” prozima, vol. 3, no. 2, pp. 1–13, 2019.
G. Mohammad, U. Islam, N. Ulama, and A. R. Chart, “Usulan Perbaikan Tata Letak Fasilitas Area Produksi Dengan Menggunakan Metode Activity Relationship Chart,” J. Ilm. Res. Dev. Student, vol. 1, no. 1, pp. 22–29, 2023.
Irfan. and Y. D. Putri, “Perancangan Usulan Layout Pada Workshop Dan Garage Untuk Efisiensi Waktu Kerja Dengan Metode Activity Relationship Chart (ARC) Di PT Pp London Sumatera Bah Lias,” IEJ J., vol. 13, no. 02, pp. 63–72, 2024.
N. T. Yulia and A. S. Cahyana, “Relayout Fasilitas Menggunakan Metode Systematic Layout Planning dan Blocplan Guna Meminimasi Jarak Material Handling,” J. Procedia Eng. Life Sci., vol. 2, no. 2, 2022.
B. Nugrahadi et al., “Perancangan Ulang Tata Letak Fasilitas Produksi Dengan Metode BLOCPLAN (Studi Kasus : UKM Roti Sahabat, Colomadu),” J. Pros. E-Proceeding SENRIABDI, vol. 3, pp. 677–688, 2023.
B. Di, C. V Arto, A. Rozak, A. D. Kristanto, G. S. Raharjo, and N. A. Saleh, “Penerapan ARC dan ARD untuk Membuat Rancangan Layout Fasilitas pada Pabrik Kerupuk Menggunakan BLOCPLAN Di CV Arto Moro,” J. Bull. Appl. Ind. Eng. Theory, vol. 2, no. 2, pp. 145–149, 2021.
Downloads
Additional Files
Posted
Categories
License
Copyright (c) 2026 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
