Mosque Congregation Service Monitoring Base on IoT
Monitoring Layanan Jama’ah Masjid Berbasis IoT
DOI:
https://doi.org/10.21070/ups.11132Keywords:
ESP32, KY037, DHT11, Google Sheet, Internet of ThingsAbstract
The comfort of the mosque environment is essential for supporting worshippers’ concentration and solemnity during prayer. Noise and inappropriate temperature conditions can reduce comfort and interfere with worship activities. This issue occurs at Baiturrahim Mosque, Campus 2 of Muhammadiyah University of Sidoarjo, where continuous monitoring by mosque administrators is challenging due to academic responsibilities and limited time. To overcome this problem, an Internet of Things (IoT)-based Mosque Congregation Service Monitoring System was developed. The system uses a KY-037 sensor to measure noise levels and a DHT11 sensor to monitor room temperature. Additionally, three feedback buttons enable worshippers to indicate their satisfaction levels as satisfied, less satisfied, or dissatisfied. All data are processed by an ESP32 microcontroller and transmitted via the internet to Google Sheets in real time. This system assists administrators in remotely monitoring mosque conditions and maintaining a comfortable worship environment effectively.
Downloads
References
A. Rasyid, M. Tsahbana, and M. Y. Nurrahman, “Fungsi Masjid Sebagai Tempat Ibadah Dan Pusat Ekonomi Umat Islam,” Relig. J. Agama, Sos. dan Budaya, vol. 1, no. 4, pp. 374–383, 2023, [Online]. Available: https://maryamsejahtera.com/index.php/Religion/article/view/241
P. Studi and T. Kelautan, “Perancangan Sistem Alarm Kebisingan untuk Kapal Penangkap Ikan Berbasis Arduino Uno dengan Sensor KY-037,” vol. 3, no. 3, pp. 297–305, 2024, doi: 10.55123/insologi.v3i3.3521.
S. D. Ayuni, S. Syahrorini, and J. Jamaaluddin, “Lapindo Embankment Security Monitoring System Based on IoT,” Elinvo (Electronics, Informatics, Vocat. Educ., vol. 6, no. 1, pp. 40–48, 2021, doi: 10.21831/elinvo.v6i1.40429.
A. M. ’Aafi, J. Jamaaluddin, and I. Anshory, “Implementasi Sensor Pzem-017 Untuk Monitoring Arus, Tegangan dan Daya Pada Instalasi Panel Surya dengan Sistem Data Logger Menggunakan Google Spreadsheet dan Smartphone,” SNESTIK Semin. Nas. Tek. Elektro, Sist. Informasi, dan Tek. Inform., pp. 191–196, 2022, [Online]. Available: https://ejurnal.itats.ac.id/snestikdanhttps://snestik.itats.ac.id
M. Fan, D. A. N. Dht, and B. Arduino, “PENGENDALIAN SUHU RUANGAN MENGGUNAKAN,” vol. 6, no. 1, pp. 30–38, 2021.
I. Anshory, A. Fahruddin, A. A. Al Fais, N. M. Abdillah, Jamaaluddin, and Kamaruzzaman Sopian, “No TitleAnalysis of the Effect of Serpentine Copper Pipe Placement on PV/T Module Temperature,” CAMA Cent. Appl. Macroecon. Anal., vol. 7, no. 3, pp. 285–292, 2020.
S. Budijono and Felita, “Smart Temperature Monitoring System Using ESP32 and DS18B20,” IOP Conf. Ser. Earth Environ. Sci., vol. 794, no. 1, 2021, doi: 10.1088/1755-1315/794/1/012125.
F. F. Abdillah, “Penerapan Iot Untuk Memonitoring Jemaah Masjid Sesuai Protokol Kesehatan Terhadap Virus Covid-19 Berbasis Arduino,” SinarFe7 (Seminar Nas. Fortei Reg. 7), vol. 4, no. 1, pp. 437–442, 2021.
D. Indonesia and G. Mandiri, “Prosiding Seminar Nasional Inovasi dan Riset Multidisiplin Pengukuran Tingkat Kebisingan Berbasis IOT Di Lingkungan Kerja Prosiding Seminar Nasional Inovasi dan Riset Multidisiplin,” vol. 1, no. 1, pp. 72–82, 2026.
A. Fikri, “Simple IoT-Based Home Security System Using ESP32 and Blynk,” Data Sci. J. Comput. Appl. Informatics, vol. 9, no. 2, pp. 46–50, 2025, doi: 10.32734/jocai.v9.i2-22595.
R. D. Irianti, A. F. Dianta, Z. Maisat, and E. Darmawan, “Implementation of a Push Button -Based Tangible User Interface for Virtual Object Control in Unity,” vol. 8, no. 1, pp. 747–757, 2026, doi: 10.61992/jiem.v8i1.254.
I. Y. Basri, D. Novaliendry, and I. M. Tania, “Design and Development of Inductive Sensor Mini Trainer Based on Arduino,” J. Teknol. Inf. dan Pendidik., vol. 15, no. 1, pp. 38–49, 2022, doi: 10.24036/jtip.v15i1.561.
M. D. Ramadhan, A. Wisaksono, J. Jamaaluddin, and A. Ahfas, “Prototype Of Moisture Content Meter In Grain Using Esp32 Based On Spreadsheet,” J. Comput. Networks, Archit. High Perform. Comput., vol. 6, no. 2, pp. 502–513, 2024, doi: 10.47709/cnahpc.v6i2.3530.
O. Kryvonos, O. Strutynska, and M. Kryvonos, “the Use of Visual Electronic Circuits Modelling and Designing Software Fritzing in the Educational Process,” Zhytomyr Ivan Franko state Univ. journal. Рedagogical Sci., vol. 1, no. 1(108), pp. 198–208, 2022, doi: 10.35433/pedagogy.1(108).2022.198-208.
Muldiyana, “Integrating Sketchup Based 3d Modeling Into Graphic Design and Architectural Education: Enhancing Visual Thinking and Creative Skills,” Int. J. Educ. Inf. Technol. Others, vol. 9, no. 1, pp. 1–15, 2026.
Downloads
Additional Files
Posted
License
Copyright (c) 2026 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
