Implementation Of Line Balancing In The Rafia Production Process With The Ranked Positional Weight Method
Penerapan Line Balancing Pada Proses Produksi Rafia Dengan Metode Ranked Positional Weight
DOI:
https://doi.org/10.21070/ups.10858Keywords:
Line Balancing, Ranked Positional Weight, Production Line Efficiency, Raffia ProductionAbstract
The raffia production line at UD Lancar Jaya experienced an imbalanced workload, resulting in high idle time and low line efficiency. The total process time was recorded at 53 minutes, with the longest work element being 12 minutes, while the initial condition consisted of 11 work stations with an efficiency of only 16.06%. This study aimed to balance the production line and determine the optimal work station configuration using the Ranked Positional Weight (RPW) method. This method ranks work elements based on position weight to optimize workload distribution between stations. The results showed that the optimal number of work stations could be reduced to 2, with an increase in line efficiency to 88.33% and a decrease in balance delay to 11.67%. In addition, the smoothness index value of 5.39 indicated a more even workload distribution compared to the initial condition.
Downloads
References
A. Ramadhan, S. Putera, and I. Marodiyah, “Optimizing Maintenance Efficiency with OEE Method Mengoptimalkan Efisiensi Pemeliharaan dengan Metode OEE,” vol. 7, pp. 21–26, 2024.
F. S. Lubis, N. Syalsabila, and M. Hartati, “Penerapan Line Balancing Untuk Mengurangi Waste Pada Proses Produksi Meja Menggunakan Metode RPW dan VSM pada Industri Furnitur,” pp. 180–191, 2024.
A. V. Prasmoro et al., “JURNAL RISET TEKNIK KOMPUTER ANALISIS WAKTU PROSES PRODUKSI RANSEL BAGIAN SEWING,” vol. 1, no. 2, pp. 31–42, 2024.
D. Redantan, “Meningkatkan Line Efficiency ( LE ) Dengan Memperbaiki Bottle Neck,” vol. 4, no. 2, pp. 267–270, 2021.
M. Mengistnew, T. Yifter, and C. Yang, “Heliyon Productivity improvement through assembly line balancing by using simulation modeling in case of Abay garment industry Gondar,” Heliyon, vol. 10, no. 1, p. e23585, 2024, doi: 10.1016/j.heliyon.2023.e23585.
Y. S. R. Sucita Dewi Fitriani, Aris Insan Waluya, “Analisis Optimasi Penerapan Line Balancing Guna Meningkatkan Efisiensi Keseimbangan Lintasan Produksi,” vol. 4, no. 3, pp. 643–651, 2025.
S. A. R. Mustakim, “Meningkatkan Efisiensi Line Produksi dengan Pendekatan Metode Ranked Positional Weight : Studi Kasus PT IBCK Garment,” vol. 1, no. 2, pp. 82–95, 2023.
H. U. Askar Lumagi, Abdul Rasyid, Sunardi, “PRODUKSI MENGGUNAKAN METODE LARGEST CANDIDATE RULES DAN,” vol. 4, no. 1, pp. 40–54, 2021.
I. Nasution, Andri Rachmat Kumalasian Kusumo, Danang Adi Darmawan, “Usulan Perbaikan Keseimbangan Lintasan Perakitan Departemen Assembling Menggunakan Metode RPW-MVM dan Simulasi (Kasus PT. XYZ),” J. Indones. Sos. Teknol., vol. 2, no. 4, pp. 539–558, 2021.
S. Alvionita and R. Rochmoeljati, “Analisis Keseimbangan Produksi Lower Holder dengan Pendekatan Line Balancing Pada PT . XYZ,” vol. 12, no. 1, pp. 103–116, 2025.
S. N. M. Nafia Kusumandari, Nilam Handayani, Muh. Najib Amril Huda, “Sistem Penjadwalan Produksi Job Shop Pada Konveksi Arjuna Dengan Menggunakan Metode Sequencing,” vol. 5, no. 2, pp. 69–76, 2024.
A. Meldia Fitri, Adelino Muhammad Ilham, “Analisis Line Balancing untuk Meningkatkan Efisiensi Lintasan Produksi Perakitan,” Rang Tek. J., vol. 5, no. 2, pp. 295–300, 2022.
W. Poncotoyo, S. Mardhiani, R. Puspita, M. F. Zain, and S. A. Sholihah, “Penerapan Metode Line Balancing dengan Pendekatan Ranked Position Weight , Regional Approach , dan Largest Candidate Rules,” vol. 2, no. 1, pp. 32–38, 2022.
D. F. Surbakti, R. L. Hutauruk, and W. H. Harahap, “Penerapan Line Balancing pada Proses Produksi Ragum Menggunakan Metode Region Approach dan Metode Largest Candidate Rule ( LCR ) TALENTA Conference Series Penerapan Line Balancing pada Proses Produksi Ragum Menggunakan Metode Region Approach dan Metode La,” vol. 8, no. 1, 2025, doi: 10.32734/ee.v8i1.2642.
G. M. Zuniartiningrum, Muhammad Choiru Zulfa, “Impression : Jurnal Teknologi dan Informasi Analisis Line Balancing Pada Carline Subaru Menggunakan Metode,” vol. 4, no. 2, 2025.
D. K. Priatna, “Manajemen Operasi,” vol. 32, no. 3, Tasikmalaya: Perkumpulan Rumah Cemerlang Indonesia, 2025, pp. 167–186.
M. R. Basalamah, H. N. Azizah, U. Kholifah, and H. C. Suroso, “Implementasi Line balancing pada Proses Produksi Baju Taqwa di UD . Sofi Garment Jurusan Teknik Industri , Fakultas Teknologi Industri ,” pp. 307–312.
J. Haekal and M. Power, “Improving Work Efficiency and Productivity with Line Balancing and TPS Approach and Promodel Simulation on Brush Sub Assy Line in Automotive Companies,” vol. 2, no. 3, pp. 387–397, 2021, doi: 10.51542/ijscia.v2i3.24.
A. F. Fauzi, “Productivity Improvement through Line Balancing Measurement in the Loom Section Using the Ranked Positional Weight ( RPW ) Method : Peningkatan Produktivitas Melalui Pengukuran Line Balancing Pada Section Loom Menggunakan Metode Ranked Positional Weight (,” vol. 26, no. 4, pp. 1–9, 2025, doi: 10.21070/ijins.v26i4.1581.
I. D. Andri Rachmat Kumalasian Nasution, Danang Adi Kusumo, “USULAN PERBAIKAN KESEIMBANGAN LINTASAN PERAKITAN DEPARTEMEN ASSEMBLING MENGGUNAKAN METODE RPW-MVM DAN SIMULASI (KASUS PT.XYZ),” vol. 2, no. 4, pp. 539–560, 2021.
Downloads
Additional Files
Posted
License
Copyright (c) 2026 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
