Effectiveness of Water Temperature Protection Between Stamford Perkins 140 kVA and Stamford Perkins 350 kVA Generator Sets
Efektifitas Pengaman Water Temperature Antara Genset Type Stamford Perkins 140 kVA dan Stamford Perkins 350 kVA
DOI:
https://doi.org/10.21070/ups.10722Keywords:
Generator, Water Temperature, Safety System, OverheatingAbstract
The objective of this study is to evaluate the effectiveness of the water temperature safety system on the 140 kVA and 350 kVA Stamford Perkins generators in preventing overheating. Both generators were tested directly under various load conditions, ranging from 0% to 100%, as part of a descriptive comparative methodology. Coolant temperature, alarm response, and system shutdown activation were among the parameters recorded. The findings indicate that both generators possess operational safety mechanisms. Unlike the 140 kVA generator, the 350 kVA generator demonstrated superior performance, as evidenced by more consistent temperature rises, faster warning responses, and shutdown activation at lower temperatures. This is influenced by the larger and more effective cooling system capacity. Therefore, generator capacity and cooling system performance have a significant impact on how effective the temperature safety system is.
Downloads
References
K. Tambunan, Z. Fanani, M. Prihajatno, P. Kelautan, P. Kupang, and P. Bone, “Analisis Laju Perpindahan Panas Sistem Pendingin Air Tawar pada Engine Generator Listrik Analysis Of Heat Transfer With Fresh Water System Electric Engine Generator,” Jurnal Airaha, no. 2, 2019.
“Analisis Pengaruh Kualitas Minyak Lumas Dan Air Pendingin Terhadap Kinerja Cooler ( Metode Spss ) Di Kapal Ahts. Logindo Destiny Dan Strategi Optimasi Kinerja Cooler ( Metode Swot Dan Ahp) ( Studi Persepsi Terhadap Taruna Teknika VII PIP Semarang ).”
I. Suryapradana and A. Halim, “Analysis of Application of the Thermostat in the Cooling System of the Nissan CWB 45 Dump Truck Engine,” Sebatik, vol. 28, no. 2, pp. 313–319, Dec. 2024, doi: 10.46984/sebatik.v28i2.2496.
“Optimalisasi Perawatan Cooling System.”
L. Sartika, A. M. Prasetia, I. Mado, and Fidarwati, “Analysis Of The Effect Of Loading On Parallel Generator Work At PT. Mitrabara Adiperdana Tbk,” JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA), vol. 7, no. 2, pp. 136–152, Oct. 2023, doi: 10.21070/jeeeu.v7i2.1673.
M. P. Sugalih and P. Purwoko, “Analisis Variasi Campuran Methanol dan Air Pada Water Methanol Injection Terhadap Emisi Gas Buang dan Temperature Didalam Intake Manifold Pada Diesel Engine 4JBI-TC,” AEEJ : Journal of Automotive Engineering and Vocational Education, vol. 5, no. 2, pp. 92–104, Dec. 2024, doi: 10.24036/aeej.v5i2.243.
Z. Xie, A. Wang, and Z. Liu, “An economical and precise cooling model and its application in a single-cylinder diesel engine,” Applied Sciences (Switzerland), vol. 11, no. 15, Aug. 2021, doi: 10.3390/app11156749.
A. Sya’bani, I. Gede, and E. Lesmana, “VISA: Journal of Visions and Ideas Analisis Sistem Pendingin Mesin Bantu Generator Menggunakan Media Air Laut”.
R. Haque, A. Bajwa, N. A. Siddiqui, and I. Ahmed, “Predictive Maintenance In Industrial Automation: A Systematic Review Of Iot Sensor Technologies And Ai Algorithms,” American Journal of Interdisciplinary Studies, vol. 5, no. 1, pp. 01–30, Mar. 2024, doi: 10.63125/hd2ac988.
M. A. Mohd Yusoff, M. F. M. Said, and R. I. A. Jalal, “Analysis Of Engine Split Cooling Systems For Internal Combustion Engines: Focus On Temperature Distribution And Performance Optimization,” Jurnal Mekanikal, vol. 48, pp. 63–81, Dec. 2025, doi: 10.11113/jm.v48.577.
J. S. Mangengke and S. Marsudi, “Analysis of Cooling System Abnormalities in Diesel Generators at MV. Meratus Kahayan,” Jurnal Aplikasi Pelayaran Dan Kepelabuhanan, vol. 14, no. 2, pp. 107–113, Mar. 2024, doi: 10.30649/japk.v14i2.108.
M. Z. L. Abrori, J. P. Siahaan, R. I. Yaqin, B. Demeianto, M. Tumpu, and D. Darmawan, “Design and Implementation of Real-Time Diesel Engine Operational Monitoring Devices Based on Microcontrollers,” Jurnal Penelitian Pendidikan IPA, vol. 11, no. 9, pp. 1061–1069, Sep. 2025, doi: 10.29303/jppipa.v11i9.9739.
M. Anjelio Efrial, Y. Thiro, K. Yunior, S. Julaihah, ) Politeknik, and P. Surabaya, “Implementation Of Iot In The Radiator Coolant Control And Monitoring Prototype On Genset Using Esp 32 Based Nodemcu Smartphones.”
Faisal Abdul Aziz, S. Maulana, R. F. Naryanto, and H. Hidayat, “The effect of additive addition to fuel with variations in preheating and water coolant on multi-cylinder diesel engine performance,” JMEL : Journal of Mechanical Engineering Learning, vol. 13, no. 2, pp. 55–61, May 2025, doi: 10.15294/jmel.v13.i2.5076.
H. Rosyid Hidayat and T. Jaya Saputra, “Rancang Bangun Engine Stand Diesel Jenis Panther Dan Analisis Sistem Pendingin,” 2018.
A. Dewo Augustama, “Kontrol Suhu Pada Generator Set Dengan Menggunakan Mikrokontroler.” [Online]. Available: https://id.wikipedia.org/wiki/PID
S. Sukri, U. Syamsuddin, I. Musthofa, K. D. Artika, And M. Merpatih, “Pengaruh Temperatur Water Coolant Dan Air Biasa Terhadap Konsumsi Bahan Bakar Pada Mesin Bensin Daihatsu Taruna Efi 1.6,” Elemen : Jurnal Teknik Mesin, vol. 12, no. 1, pp. 60–67, Jun. 2025, doi: 10.34128/je.v12i1.320.
P. D. Supriana, K. Rihendra Dantes, and I. N. Pasek Nugraha, “Pengaruh Variasi Fluida Pendingin Terhadap Capaian Suhu Optimal Pada Rancangan Mesin Pendingin Mini Water Chiller.”
A. Saukon Kamalul Husna, D. Desriyanti, and R. Intan Vidyastari, “Air Temperature Control System In Silent Generator Box,” JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA), vol. 5, no. 2, pp. 165–174, Oct. 2021, doi: 10.21070/jeeeu.v5i2.1556.
A. khalaf and A. Hammoodi, “A Study of IoT-Based Monitoring and Controlling Systems for Diesel Electrical Generators,” Anbar Journal of Engineering Sciences, vol. 15, no. 2, pp. 112–120, Dec. 2024, doi: 10.37649/aengs.2024.152849.1099.
E. Nur Huda and K. A. W. Hasbullah, “Design Of Overheat Detection Device On Vehicle Engine Through Monitoring Water Temperature Or Cooling Oil,” NEWTON: Networking and Information Technology, vol. 3, no. 2, pp. 15–19, 2023.
P. Agustiar Ma, W. Pracoyo, and F. Azharul, “Analisis Pengaruh Kegagalan Sistem Pendingin Genset Caterpillar 3500 Series,” Jurnal Rekayasa Material, Manufaktur dan Energi, vol. 2, no. 2, pp. 131–139, 2019, doi: 10.30596/rmme.v2i2.3666.
D. Feriyanto, S. Alva, R. Vikaliana, and A. S. Kristanto, “Analisis Sistem Pendingin Menggunakan Thermostat Dan Tanpa Thermostat Dalam Pencapaian Panas Mesin Pada Alat Uji Prestasi,” Jurnal Rekayasa Mesin, vol. 13, no. 3, pp. 637–646, Dec. 2022, doi: 10.21776/jrm.v13i3.757.
A. Wisaksono and Y. Purwanti, “Improving Air Quality In The Classroom Through The Air Conditioning Cleaning Program As An Effort To Maintain Student Health In The Learning Process At The Annur Sidoarjo Islamic Boarding School,” Journal of Social Comunity Services (JSCS), vol. 2, no. 3, pp. 247–253, Jul. 2025, doi: 10.61796/jscs.v2i3.358.
J. Jamaaluddin, I. Sulistiyowati, B. W. A. Reynanda, and I. Anshory, “Analysis of Overcurrent Safety in Miniature Circuit Breaker AC (Alternating Current) and DC (Direct Current) in Solar Power Generation Systems,” in IOP Conference Series: Earth and Environmental Science, IOP Publishing Ltd, Jul. 2021. doi: 10.1088/1755-1315/819/1/012029.
H. Gillbert and R. Hidayat, “Design of a backup voltage supply in a medium-voltage cubicle control panel circuit when a blackout occurs from PLN,” JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA), vol. 6, no. 1, pp. 1–7, Mar. 2022, doi: 10.21070/jeeeu.v6i1.1414.
J. Jamaaluddin, I. Anshory, and S. Dhiya Ayuni, “Analysis of Overcurrent Safety in Miniature Circuit Breaker with Alternating Current,” Journal of Electrical Technology UMY (JET-UMY), vol. 5, no. 2, 2021.
S. D. Ayuni, A. H. Yuwono, A. Mulyadi, S. Syahrorini, and A. H. Falah, “Automated steam engine technology for eco-printing batik: Empowering community economies,” Community Empowerment, vol. 9, no. 5, pp. 797–803, May 2024, doi: 10.31603/ce.10462.
A. Wisaksono, Y. Purwanti, N. Ariyanti, and M. Masruchin, “Design of Monitoring and Control of Energy Use in Multi-storey Buildings based on IoT,” JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA), vol. 4, no. 2, pp. 128–135, Jun. 2020, doi: 10.21070/jeeeu.v4i2.539.
Downloads
Additional Files
Posted
License
Copyright (c) 2026 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
