Testing of Plastic Waste Crushing Machine
Pengujian Mesin Pencacah Sampah Plastik
DOI:
https://doi.org/10.21070/ups.9477Keywords:
Plastic shredder, fuel efficiency, PET, HDPE, PP, , LDPEAbstract
Plastic waste is one of the environmental problems that continues to increase due to its nature that is difficult to decompose naturally. Efforts to process plastic waste through shredding are one solution to increase economic value while reducing the impact of pollution. This study aims to test the performance of a plastic waste shredding machine powered by a 6.5 HP gasoline engine with 14 steel blades on four types of plastic, namely Polyethylene Terephthalate (PET), High Density Polyethylene (HDPE), Polypropylene (PP), and Low Density Polyethylene (LDPE). The parameters tested include shredding rate, mass efficiency, fuel consumption, and fuel efficiency.
Downloads
References
I. Nur, Nofriadi, and Rusmardi, “Pengembangan Mesin Pencacah Sampah / Limbah Plastik,” Semin. Nas. Sains dan Teknol., no. November, pp. 1–8, 2014.
U. Khomsaha Shofwan, J. Waluyo*, and T. Hidayat, “Analisis Perancangan Mesin Pencacah Limbah Plastik Menggunakan Pisau Crusher dan Shredder,” J. Teknol., vol. 16, no. 1, pp. 28–36, 2023, doi: 10.34151/jurtek.v16i1.3895.
W. K. Sugandi, A. Yusuf, T. Herwanto, and S. Maulana, “Pengujian Mesin Pencacah Plastik (Studi Kasus Bank Sampah Tasikmalaya (Bst) Di Kecamatan Singaparna, Kabupaten Tasikmalaya) Performance Test of Plastic Chopper (Case Study Tasik Malaya Garbage Bank (Bst) in Singaparna, Tasikmalaya),” J. Tek. Pertan. Lampung, vol. 7, no. 3, pp. 151–159, 2018, [Online]. Available: http://dx.doi.org/10.23960/jtep-l.v7.i3.151-159
L. M. HADI, Perancangan Dan Pengujian Sampah Mesin Cacah Plastik Portabel Menggunakan Teknologi Crusher Dengan Mata Pisau Shredder. 2023. [Online]. Available: http://digilib.unila.ac.id/id/eprint/72284%0Ahttp://digilib.unila.ac.id/72284/2/TUGAS AKHIR TANPA BAB PEMBAHASAN.pdf
ICLAS NUR, “Pengembangan-Mesin-Pencacah-Sampahlimbah,” no. November, pp. 1–8, 2014.
S. Rahmatillah, M. Idham, and Ichawana, “Uji Performa Mesin Pencacah Plastik Mini Tipe Pisau Double Helix,” J. Ilm. Mhs. Pertan., vol. 8, no. 4, pp. 660–666, 2023, [Online]. Available: www.jim.unsyiah.ac.id/JFP
Arif Rochman Fachrudin, Fina Andika Frida Astuti, Mira Esculenta Martawati, and Ahmad Hanif, “Pelatihan Pengelasan Smaw Bagi Karang Taruna Kelurahan Temas Kecamatan Batu Kota Batu,” J. Abdimas Bina Bangsa, vol. 2, no. 1, pp. 14–19, 2021, doi: 10.46306/jabb.v2i1.56.
J. M. Perawatan, M. Peralatan, and K. Yang, “Jenis-jenis Maintenance ( Perawatan ) Mesin / Peralatan Kerja”.
A. E. Mulyadi, Iswanto, Setyo D, “RANCANG BANGUN JIG PENYAMBUNG PIPA MULTIDIMENSI,” 2017, pp. 978–979.
N. A. Mutaqin, Margono, B. H. Priyambodo, and M. V. Hermawan, “Mesin Pencacah Singkong Sebagai Pakan Ternak Sapi Untuk Peningkatan Kesejahteraan UKM Sido Mulyo di Kabupaten Karanganyar,” Pros. Semin. Nas. Unimus, pp. 948–953, 2020, [Online]. Available: http://prosiding.unimus.ac.id
K. T. Dewi, R. P. Saputra, dan I. A. Santosa, “Analisis Efektivitas Mesin Pencacah Plastik Menggunakan
Motor Bensin,” J. Rekayasa Proses, vol. 14, no. 1, hlm. 89–96, 2021.
R. Sutanto dan A. Wibowo, “Analisis Konsumsi Energi Mesin Pencacah Plastik Tipe Crusher,” J. Teknol.
Mesin, vol. 10, no. 2, hlm. 77–84, 2019.
M. S. Riyanto, “Studi Perbandingan Efisiensi Mesin Pencacah Plastik Berdasarkan Jenis Limbah Plastik,”
Prosiding SNST ke-10, Univ. Wahid Hasyim, hlm. 120–126, 2019.
L. M. Hadi, Perancangan dan Pengujian Mesin Cacah Plastik Portabel Menggunakan Teknologi Crusher
dengan Mata Pisau Shredder, Skripsi, Univ. Negeri Yogyakarta, 2023.
W. K. Sugandi, A. Yusuf, T. Herwanto, dan S. Maulana, “Pengujian Mesin Pencacah Plastik (Studi Kasus
Bank Sampah Tasikmalaya),” J. Tek. Pertan. Lampung, vol. 7, no. 3, hlm. 151–159, 2018.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
