Redesign of Nahdlatul Ulama Hospital (RSNU) Jombang Using the Special Moment Resisting Frame (SMRF) Method
Perencanaan Ulang Rumah Sakit Nahdlatul Ulama (RSNU) Jombang Menggunakan Metode Sistem Rangka Pemikul Momen Khusus (SRPMK)
DOI:
https://doi.org/10.21070/ups.8751Keywords:
Structure, SRPMK, ConcreteAbstract
The structural design of multi-story buildings requires accuracy and calculations that refer to applicable regulatory standards. In this study, the structural design was carried out by applying the Special Moment Resisting Frame System (SMRFS) based on SNI 2847:2019 and SNI 1726:2019. The modeling and structural analysis process used SAP2000 software, starting from creating the building model, inputting the applied loads, to analyzing internal forces within the structure. The design results show that the dimensions of structural elements such as beams, columns, and floor slabs meet the requirements for strength, stability, and safety against seismic loads. With this approach, the building structure is considered to behave in a ductile manner and is safe against failure, in accordance with the fundamental principles of earthquake-resistant design.
Downloads
References
A. Struktur, R. Sakit, P. Cirebon, and K. Kunci, “Jurnal konstruksi,” vol. VI, no. 6, pp. 565–584, 2013.
Bambang Agus and Salim Arif, “Kriteria Dasar Perencanaan Struktur Bangunan Tahan Gempa,” J. Tek. Sipil, vol. 11, no. 1, 2018, [Online]. Available: file:///C:/Users/user/Downloads/787-2466-1-PB.pdf
R. Laily, M. D. J. Sumajouw, and S. E. Wallah, “Perencanaan Gedung Training Center Konstruksi Beton Bertulang 4 Lantai Di Kota Manado,” J. Sipil Statik, vol. 7, no. 8, pp. 1095–1106, 2019.
P. H. Karisoh, S. O. Dapas, and R. E. Pandaleke, “Perencanaan Struktur Gedung Beton Bertulang dengan Sistem Rangka Pemikul Momen Khusus (SRPMK) dan Sistem Rangka Pemikul Momen Menengah (SRPMM),” J. Sipil Statik, vol. 6, no. 6, pp. 361–372, 2018.
F. J. Liando, S. O. Dapas, and S. E. Wallah, “Perencanaan Struktur Beton Bertulang Gedung Kuliah 5 Lantai,” J. Sipil Statik, vol. 8, no. 4, pp. 471–482, 2020.
Sunjoto, “Jurnal Teknik Sipil 1 Jurnal Teknik Sipil,” J. Sendi Tek. Sipil, vol. 1, no. 1, pp. 1–8, 1989, [Online]. Available: https://jurnal.usk.ac.id/JTS/index
K. Badan and S. Nasional, “PENETAPAN STANDAR NASIONAL INDONESIA 2847 : 2019 PERSYARATAN BETON STRUKTURAL UNTUK BANGUNAN GEDUNG DAN PENJELASAN SEBAGAI REVISI DARI STANDAR NASIONAL INDONESIA 2847 : 2013,” no. 8, 2019.
K. Sirih, “Penetapan Standar Nasional Indonesia 1727 : 2020 Beban desain minimum dan kriteria terkait untuk bangunan gedung dan struktur lain sebagal revisi dari Standar Nasional Indonesia 1727 : 2013 Beban minimum untuk perancangan bangunan gedung dan,” no. 8, 2020.
R. Oktaviansyah and M. Ghozi, “TEMANGGUNG DENGAN METODE STRUKTUR RANGKA PEMIKUL MOMEN KHUSUS ( SRPMK ) SESUAI SNI BETON 2847-2019 DAN SNI GEMPA 1726 – 2019,” pp. 1–13, 2019.
R. Pemikul, M. Khusus, and J. Tistogondo, “Fakultas teknik universitas wiraraja sumenep - madura,” vol. 7, no. 1, pp. 18–23, 2019.
D. Sistem and P. Standar, “Penerapan Standar Nasional Indonesia,” no. 8, 2020.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
