Planning of Maize Seed Planter and Watering Device
Perencanaan Alat Penanam Benih Jagung dan Penyiraman
DOI:
https://doi.org/10.21070/ups.8626Keywords:
Corn planting, planting tool, watering, frame simulation, agricultural efficiencyAbstract
As a food and animal feed source, maize (Zea mays) is a crucial strategic commodity. The CAD (Computer Aided Design) method is used in the design process to examine the frame's strength using the morfology chart. The tool's ability to maintain consistent planting distance, expedite the planting process, and minimize labor is demonstrated by the design outcomes. The design is safe to use, according to the simulation results, which reveal a maximum stress value of 14.88 MPa, a maximum displacement of 4.8 mm, and a safety factor of 10. It is anticipated that this technology will be a useful way to modernize the agriculture industry, particularly for small and medium-sized farmers.
Downloads
References
S. Sumiaty, A. R. Rusydi, N. U. Mahmud, and Y. Yuliati, “Peningkatan Produktivitas Masyarakat Melalui Pengolahan Puding Jagung Di Desa Sanrobone Kab. Takalar,” Community Dev. J. J. Pengabdi. Masy., vol. 2, no. 3, pp. 1187–1192, 2022, doi: 10.31004/cdj.v2i3.2956.
H. Firdiansyah, Riki, Sutiarso, Edy, Prayuginingsih, “Analisis Permintaan Jagung di Indonesia,” Pap. Knowl. . Towar. a Media Hist. Doc., no. 3, 2014.
M. Kris Yuan Hidayatulloh et al., “Efektivitas Pola Tanam Jagung melalui Pelatihan Perancangan dan Pengaplikasian Alat Tanam Praktis Tipe Tancap bagi Kelompok Tani,” J. Pengabdi. Masy., vol. 4, no. 1, pp. 2774–8537, 2023.
A. F. Amalia, H. S. Rahayu, and Muchtar, “Komparasi Kinerja Alat TANAM Jagung dan Tugal Pada Lahan Kering Kabupaten Sigi Sulawesi Tengah,” J. Agritechno, vol. 13, no. 2, pp. 97–104, 2020.
D. S. Saputro, “RANCANG BANGUN ALAT PENANAM JAGUNG MANUAL SISTEM TUGAL EMPAT TITIK KELUARAN (Four Outputs) BENIH,” pp. 1–18, 2021.
T. P. O. Sianipar and Z. Fatoni, “Perancangan Alat Penanam Benih Jagung Dan Penyiraman,” Turbul. J. Tek. Mesin, vol. 2, no. 1, p. 25, 2019, doi: 10.36767/turbulen.v2i1.523.
A. Sitorus, W. Hermawan, and R. Setiawan, “Development of an Integrated Machine for Corn Planting, Fertilizing and Strip Tillage,” J. Keteknikan Pertan., vol. 03, no. 2, pp. 1–8, 2015, doi: 10.19028/jtep.03.2.81-88.
Vandri, Perancangan Alat Bantu Penanam Jagung Menggunakan Metode Ergonomic Function Deployment (Efd). 2020.
I. Akbar, “Mesin Penanam Jagung (Zea Mays L.) Portabel Program Studi Teknik Pertanian,” vol. 22, no. 5, pp. 1–40, 2021.
A. Ansar, N. Nazaruddin, and A. D. Azis, “Design Development and Performance Evaluation of Two-Row Corn Seed Planter,” J. Tek. Pertan. Lampung (Journal Agric. Eng., vol. 12, no. 4, p. 979, 2023, doi: 10.23960/jtep-l.v12i4.979-987.
Holidah Holidah and Rahmatiyah Rahmatiyah, “Peningkatan Pertumbuhan Serta Hasil Panen Jagung Dengan Mengimplementasikan Jarak Dan Kedalaman Tanam Bersama Wanita Tani Desa Air Duren,” Bot. Publ. Ilmu Tanam. dan Agribisnis, vol. 2, no. 1, pp. 92–106, 2024, doi: 10.62951/botani.v2i1.162.
A. Muhammad Asshiddiq, A. Ansar, and G. Nanaluih De Side, “Pengembangan Alat Penanaman Benih Jagung Dan Pemupukan Dalam Satu Unit,” J. Agritechno, vol. 18, no. 01, pp. 68–79, 2025, doi: 10.70124/at.v18i1.1782.
R. Achsany, “Perancangan Turbin Angin Sumbu Vertikal Jenis Savonius Dengan 3 Macam Posisi Sudu,” J. Teknol., no. 1, 2016, [Online]. Available: https://jurnal.wastukancana.ac.id/index.php/teknologika/article/view/141
Sahat, J. S. Purba, W. Naibaho, T. A. Sianturi, and A. H. Aritonang, “Rancang bangun alat tanam benih jagung berbasis double seed hopper,” J. Tek. Mesin CAKRAM, vol. 6, no. 1, pp. 21–28, 2023.
M. S. Ramdhan, B. Wicaksana, V. Mardiana, Y. Faizal, and N. ATD, “Sepatagung, inovasi alat tanam jagung terintegrasi dengan sepatu kerja petani,” Pros. Elektron. PIMNAS PKM-T, pp. 1–9, 2014.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
