Design of Cassava Crushing Machine for Production of Raw Materials "Samiler"
Perancangan Mesin Pencacah Singkong untuk Produksi Bahan Baku “Samiler”
DOI:
https://doi.org/10.21070/ups.8577Keywords:
Ulrich Method, Design Concept, Frame Strength Simulation, Safety Factor, Appropriate TechnologyAbstract
The goal of this project is to create a cassava crushing machine as a cutting-edge substitute for hand chopping techniques in the manufacturing of samiler raw materials. The necessity for increased manufacturing capacity, quality, and efficiency propelled the development. Computer-aided design, or CAD, was used to create the machine in order to maximize its operational effectiveness and structural strength. The Ulrich method, which comprises steps including need discovery, concept creation, and optimal design selection, was used in the design process. With a relative score of 44% and an absolute score of 4.65, Design A was the best option, according to the concept assessment matrix. Design A's structural safety was confirmed by structural simulation, which showed a maximum displacement of 0.019 mm and a safety factor of 22 of the design.
Downloads
References
D. N. Berliani and M. T. Abadi, “Analisis Studi Kelayakan Bisnis pada Usaha Keripik Singkong,” BISMA Bus. Manag. J., vol. 1, no. 02, pp. 60–68, 2023, doi: 10.59966/bisma.v1i02.179.
D. Puspapratiwi and G. C. Monggesang, “Analisis Kelayakan Usaha Keripik Singkong Di CV. Aulia Food Kecamatan Luwuk Kabupaten Banggai,” Celeb. Agric., vol. 1, no. 1, pp. 22–28, 2020, doi: 10.52045/jca.v1i1.20.
N. Syafa’at, S. Mardianto, and P. Simatupang, “Dinamika Indikator Ekonomi Makro Sektor Pertanian Dan Kesejahteraan Petani,” Anal. Kebijak. Pertan., vol. 1, no. 1, pp. 62–73, 2003.
L. Ramadani and Amir, “Inovasi Mesin Pencacah Singkong Menjadi Multi Fungsi,” Konf. Nas. Penelit. dan Pengabdi., vol. 3, no. 2798–2580, pp. 1121–1127, 2023.
Silviana, D. Hermawan, N. R. Ismail, and A. R. Fadhilah, “Inovasi Proses Steamer Kerupuk Singkong (Samiler) Dalam Peningkatan Produktifitas Di Ukm Karya Lestari Jaya,” J. Has. Pengabdi., no. September, pp. 314–323, 2018.
G. Klutuk, R. T. Rw, and K. Tarik, “Pkms Olahan Singkong ‘ Samiler Singkong ’ Di Desa,” Pros. Semin. Nas. Teknol. dan Sains, no. 473–478, 2019.
A. Nugroho and R. N. Agustin, “Inovasi Mesin Perajang Singkong Dengan Kapasitas 15Kg / Jam Dengan Penggerak Motor Listrik,” vol. X, no. X.
Siswadi, A. Nugroho, Kurniawan, and N. Agustin, “Innovation of Cassava Chopping Machine With a Capacity of 15 Kilos Per Hour By Electric Motor,” TRAKSI Maj. Ilm. Tek. Mesin, vol. 22, no. 1, pp. 104–118, 2022.
B. O. Bolaji, S. B. Adejuyigbe, and S. P. Ayodeji, “http://sajie.journals.ac.za,” vol. 19, no. May 2008, pp. 169–178.
S. K. Bello, S. B. Lamidi, and S. A. Oshinlaja, “Design and Fabrication of Cassava Grating Machine,” Int. J. Adv. Sci. Res. Eng., vol. 06, no. 10, pp. 162–167, 2020, doi: 10.31695/ijasre.2020.33915.
P. Kinerja, M. Perajang, and S. Singkong, “Program Studi Teknologi Mekanisme Pertanian Politeknik Enjiniring Pertanian Indonesia( PEPI ),” 2022.
M. Sitorus, P. Study, T. Mesin, and U. M. Area, “PERANCANG MESIN PEMOTONG SINGKONG BENTUK BALOK DEN GAN KAPASIT AS 50kg/JAM TUGASAKHIR,” 2014.
T. A. Adlie, “Perancangan Dan Pembuatan Mata Pisau Perajang Singkong Tipe Vertikal,” Jurutera, vol. 2, no. 01, pp. 19–26, 2015, [Online]. Available: https://ejurnalunsam.id/index.php/jurutera/article/view/788
F. Azharul, Asep Yandi, and Veriah Hadi, “Perancangan Mesin Pengiris Singkong,” JTTM J. Terap. Tek. Mesin, vol. 1, no. 2, pp. 41–53, 2020, doi: 10.37373/msn.v1i2.49.
M. A. D. Prianto, “Pembuatan dan Pengujian Mesin Perajang Singkong Menggunakan Papan Pisau Vertikal dengan Mekanisme Kerja Engkol Peluncur,” 2014.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
