Automatic Welding Glasses Opening and Closing System with Arduino Based Voice Control
Sistem Buka Tutup Kacamata Las Otomatis dengan Kontrol Suara Berbasis Arduino
DOI:
https://doi.org/10.21070/ups.8312Keywords:
Automatic Welding Glasses, Arduino Uno, Voice Control, Voice RecognitionAbstract
This study aims to design and develop an automatic welding goggles system that can be controlled using voice commands, based on Arduino. This system is designed to improve the safety of welders by minimizing the risk of excessive light exposure from the welding process. The main components used include Arduino Uno, SG90 servo motor, and Voice Recognition V3 sensor. When the command "on" or "off" is given, the system automatically adjusts the position of the welding goggles and activates or deactivates the cooling fan. Testing was carried out to evaluate the system's response to voice commands, response time, effective range of voice recognition, and system durability. The results show that the system has a command recognition accuracy rate of 100% with an average response time of 1.1 seconds, and a durability of up to 60 minutes without a decrease in performance.
Downloads
References
I. Anshory, D. Hadidjaja, and I. Sulistiyowati, “Measurement, Modeling, and Optimization Speed Control of BLDC Motor Using Fuzzy-PSO Based Algorithm,” J. Electr. Technol. UMY, vol. 5, no. 1, pp. 17–25, 2021, doi: 10.18196/jet.v5i1.12113.
A. H. Arif Rakhman Suharso, Wahyu Ari Putranto, Khaeroman, Prijo Harsono, “Teknik Pengelasan SMAW dan Keselamatan Kerja Melalui Pelatihan Las di Desa Beji Ungaran,” vol. 04, no. 02, pp. 29–37, 2023.
S. Mawu, “Analisa Struktur Baja Serta Metode Pelaksanaan Pekerjaan Pada Proyek Modisland Fashion Store,” Dr. Diss. Politek. Negeri Manad., pp. 1–134, 2018.
R. Asnel, S. Ananda, R. Fitri, Suryani, and K. Ningsih, “Analisis Kecelakaan Kerja pada Pekerja Bengkel Las,” Heal. CARE J. Kesehat., vol. 12, pp. 151–158, Jul. 2023, doi: 10.36763/healthcare.v12i1.376.
R. F. Adis Amelia Hermawanti, “Analisis Potensi Pada Proses Produksi Bengkel Las Untuk Mengurangi Risiko Kecelakaan Kerja,” pp. 1–22.
R. A. Ganila, “Pengendalian Manajemen Risiko Kesehatan dan Keselamatan Kerja (K3) Menggunakan Metode Job Safety Analysis (JSA) dan Hazard Identification, Risk Assesment and Risk Control (HIRARC) di Perusahaan XYZ,” J. Ekon. Vol. 18, Nomor 1 Maret201, 2022.
A. F. Kurniawan et al., “GEJALA FOTOKERATITIS AKUT AKIBAT RADIASI SINAR ULTRAVIOLET (UV) PADA PEKERJA LAS DI PT. PAL INDONESIA SURABAYA,” pp. 22–31.
W. Astin and A. Mulyadi, “Pengaruh Penggunaan Alat Pelindung Mata Terhadap Ketajaman Penglihatan Pekerja Las Di Kecamatan Mandau, Bengkalis Riau,” J. Ilmu Lingkung., vol. 10, no. 1, pp. 67–77, 2016.
V. No et al., “Gambaran Kepatuhan Penggunaan Alat Pelindung Diri pada Pekerja Bengkel Las Kecamatan Oebobo Kota Kupang,” vol. 8, no. 1, pp. 49–57, 2023.
Nur Fatihatul Faedah, “ANALISIS BAHAYA KESEHATAN PADA TUKANG LAS,” Nucl. Phys., vol. 13, no. 1, pp. 104–116, 2023.
Syahrizal, “Hubungan penggunaan alat pelindung diri (APD) dengan kesehatan mata pada pekerja pengelasan. Studi kasus di PT. X, Aceh Besar,” J. SAGO gizi dan Kesehat., vol. 3(1), pp. 109–113, 2021.
A. Astna, R. Muliawati, and B. Widjasena, “Pemakaian Kacamata Las Menurunkan Visus Mata Pekerja Las,” J. Kesehat. Masy. Indones., vol. 13, no. No. 2, November, pp. 13–16, 2018, [Online]. Available: https://jurnal.unimus.ac.id/index.php/jkmi/article
S. Jokosisworo, “Keselamatan Pengelasan,” Kapal, vol. 4, no. 1, pp. 11–14, 2007.
R. B. Pamungkas, “Hubungan Sikap Pemakaian Alat Pelindung Diri Kacamata as dengan Gangguan Mata Siswa Kelas 1 Teknik Pemesinan SMK Muhammadiyah 1 Klaten Utara,” 2018.
A. Hussein, F. Sadika, and D. Yunidar, “Pengembangan Sistem Penyetelan Ukuran Kepala Pada Helm Las Development of Welding Helmet Headstrap Adjustment System,” vol. 5, no. 3, pp. 3792–3801, 2018.
F. Harianto and D. Listyaningsih, “Faktor-Faktor Tidak Menggunakan Alat Pelindung Mata Pada Pekerja Las di Proyek Konstruksi,” Pros. SENASTITAN Semin. …, no. Senastitan Iii, 2023, [Online]. Available: http://ejurnal.itats.ac.id/senastitan/article/view/3961
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
