Implementation of Reliability Centered Maintenance II (RCM II) on Gas Turbine Generator System
Implementasi Reliability Centered Maintenance II (RCM II) pada Gas Turbin Generator Sistem
DOI:
https://doi.org/10.21070/ups.8174Keywords:
Reliability Centered Maintenance (RCM) II, Failure Mode And Effect Analysis (FMEA), Gas Turbine Generator System, RPNAbstract
Reliability Centered Maintenance II (RCM II) is a systematic approach for optimising risk-based maintenance strategies for critical equipment. This research aims to analyse the implementation of RCM II on Gas Turbine Generators (GTG) in the oil and gas industry. The research methods involve functional analysis, Failure Mode and Effects Analysis (FMEA), and risk prioritisation using Risk Priority Number (RPN). The conceptual results show that RCM II can identify critical components and formulate preventive and predictive maintenance schedules. The implementation of RCM II is expected to optimise labour and improve the operational reliability of the GTG System. This research demonstrates that RCM II is reliable, as the application of RCM II leads to a structured improvement of each component.
Downloads
References
H. B. Tambunan et al., “The challenges and opportunities of renewable energy source (RES) penetration in Indonesia: Case study of Java-Bali power system,” Energies (Basel), vol. 13, no. 22, Nov. 2020, doi: 10.3390/en13225903.
A. Prayoga Dhaneswara, F. Achmadi, M. Teknik Industri, F. Teknologi Industri, and I. Teknologi Adhi Tama Surabaya, “Analisa Komponen Kritis Dan Penerapan Reliability Centered Maintenance II (RCM II) (Studi Kasus: Gas Turbine Compressor (GTC) Pada Fasilitas Eksplorasi Dan Produksi Lepas Pantai PT.X).”
O. Mohamed and A. Khalil, “Progress in modeling and control of gas turbine power generation systems: A survey,” May 01, 2020, MDPI AG. doi: 10.3390/en13092358.
I. Purwadi Agus Darwito, “IMPLEMENTATION OF RELIABILITY CENTERED MAINTENANCE (RCM) ON GAS PURIFICATION PROCESS (GAS SWEETENING SYSTEM),” 2015.
“PERANCANGAN SISTEM PEMELIHARAAN PADA TURBIN 103-JT MENGGGUNAKAN METODE RELIABILITY CENTERED MAINTENANCE (RCM) (STUDI KASUS: PT. PETROKIMIA GRESIK UNIK AMONIA PABRIK I).”
“ANALISIS KERUSAKAN MESIN TURBIN GAS MS6001 GENERAL ELECTRIC 1 (GE 1) DENGAN MENGGUNAKAN METODE FAILURE MODE AND EFFECT.”
R. Bahauddin Azmi, R. Alif Hidayatullah, and A. Hesthi Permata Ningtyas, “ANALISIS EFEK KEGAGALAN PADA PERFORMA TURBIN GAS BERBASIS FMEA (FAILURE MODE AND EFFECTS ANALYSIS),” 2024.
J. F. Pangaribuan, A. Persat, I. Budiman, and G. Aloina, “Identifikasi Penyebab Kerusakan dengan Pendekatan Failure Mode and Effect Analysis,” JIME (Journal of Industrial and Manufacture Engineering), vol. 4, no. 2, pp. 2549–6336, 2020, doi: 10.31289/jime.v4i2.3610.
R. Bahauddin Azmi, R. Alif Hidayatullah, and A. Hesthi Permata Ningtyas, “ANALISIS EFEK KEGAGALAN PADA PERFORMA TURBIN GAS BERBASIS FMEA (FAILURE MODE AND EFFECTS ANALYSIS),” 2024.
E. Purnomo, J. Teknik Industri, and I. Teknologi Adhi Tama Surabaya, “Manajemen Risiko Operasional untuk Meningkatkan Kinerja Departemen Injection dengan Metode Failure Mode and Effect Analysis (FMEA) dan Fault Tree Analysis (FTA) (Studi Kasus : PT. XYZ).”
Olufemi Oluseun Sanyaolu, Ayodele Samuel Onawumi, Abiola Olufemi Ajayeoba, and Nathaniel Abidemi Akinrinade, “Failure Mode and Effect Analysis (FMEA) of a Taurus 60 Gas Turbine Power Plant System (GTPPS), in Mowe, Nigeria,” World Journal of Advanced Engineering Technology and Sciences, vol. 8, no. 2, pp. 175–182, Mar. 2023, doi: 10.30574/wjaets.2023.8.2.0082.
H. Ghasemian, “Failure Mode and Effect Analysis (FMEA) of Gas Turbine Power Plant System (GTPPS).”
M. Rinoza and F. Ahmad Kurniawan, “ANALISA RPN (RISK PRIORITY NUMBER) TERHADAP KEANDALAN KOMPONEN MESIN KOMPRESORDOUBLE SCREW MENGGUNAKAN METODE FMEA DI PABRIK SEMEN PT. XYZ,” Online, 2021.
M. Catelani, L. Ciani, D. Galar, and G. Patrizi, “Risk assessment of a wind turbine: A New FMECA-Based tool with RPN threshold estimation,” IEEE Access, vol. 8, pp. 20181–20190, 2020, doi: 10.1109/ACCESS.2020.2968812.
H. Dzulyadain, E. Budiasih, and F. T. Dwi Atmaji, “Proposed maintenance policy using reliability centered maintenance (RCM) method with FMECA analysis: A case study of automotive industry,” IOP Conf Ser Mater Sci Eng, vol. 1034, no. 1, p. 012111, Feb. 2021, doi: 10.1088/1757-899x/1034/1/012111.
“Reliability-Centered-Maintenance-II”.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
