Design Planning of Fish Crackers Dough Mixing Machine Using Static Load Simulation Testing
Perencanaan Desain Mesin Pengaduk Adonan Kerupuk Ikan dengan Pengujian Simulasi Beban Statik
DOI:
https://doi.org/10.21070/ups.8117Keywords:
design development, morfologi chart, Design Concept, Frame Strength Simulation, safety factorAbstract
Fish crackers are a popular seafood snack in Indonesia, especially in Pasuruan Regency, which has high fisheries potential. However, the dough mixing process is still often done manually, leading to uneven results, inconsistent texture, and high labor use. To address this, an automatic dough mixer was developed using a 0.37 kW electric motor, a pulley–V-belt and sprocket chain transmission system, and a 50×50×3 mm profile elbow iron frame. The parts in contact with the dough are made of stainless steel for hygiene. Two design alternatives were created using a morphological chart, and Concept A was selected based simulation in SolidWorks. Results showed a maximum stress of 14.224 MPa, displacement of 8.74 mm, and a safety factor of 13 under a 92 Nm load with 10 kg dough capacity, indicating the frame is safe. This innovation is expected to improve production efficiency and profitability for fish cracker SMEs in Bangil.
Downloads
References
A. R. Rahim, N. D. Bela, M. Mutmainnah, and Z. Araswati, “Sosialisasi Dan Implementasi Pembuatan Krupuk Ikan Bandeng Desa Karanggeneng Kec. Karanggeneng Kab. Lamongan,” DedikasiMU(Journal Community Serv., vol. 1, no. 1, p. 1, 2019, doi: 10.30587/dedikasimu.v1i1.1083.
P. Tamara, “Desain Fasilitas Pada Pembuatan Kerupuk Untuk Industri Kecil,” J. Tek. Ind., vol. 1, no. 2, pp. 30–37, 2011.
V. Ledianti, A. Yusuf, and A. Widyasanti, “Rancang Bangun Mesin Pengaduk Adonan Kerupuk Bawang (Studi Kasus di Usaha Kecil dan Menengah Sakinah, Cimahi),” J. Keteknikan Pertan. Trop. dan Biosist., vol. 9, no. 1, pp. 26–33, 2021, doi: 10.21776/ub.jkptb.2021.009.01.04.
A. A. Ridlwan and U. N. Surabaya, “Rancang Bangun Mesin Pengaduk Adonan Kerupuk Semi Otomatis dan Penataan Manajemen untuk Meningkatkan Produktivitas UMKM Kerupuk Jaya Abadi , Sidoarjo,” Inspirasi J. Pengabdi. dan Pemberdaya. Masy., vol. 2, no. 1, pp. 9–19, 2021.
F. T. Industri, “PLANNING BUILD FOR DONUT DOUGH MIXING,” 2015.
S. Al, F. Priyagung, H. Unung, and K. Kerupuk, “‘ PERENCANAAN MESIN PENGADUK ADONAN KERUPUK JENIS PADDLE UNTUK HOME INDUSTRI ’ Program Strata Satu Teknik Universitas Islam Malang Jurusan Teknik Mesin Fakultas Teknik Universitas Islam Malang Jl . MT Haryono 193 Malang 65145 Di indonesia merupakan negara,” pp. 3–6, 2010.
D. Gumulya, “Eksplorasi Desain Dengan Peta Morfologi (Studi Kasus: Perancangan Desain Mebel Terinspirasi Gaya Memphis Era 1980an),” J. PATRA, vol. 4, no. 2, pp. 111–124, 2022, doi: 10.35886/patra.v4i2.390.
B. B. Wahyujati, “Aplikasi metode Morphological Chart pada perancangan Robot Belajar Baca (ROBOCA) untuk anak usia dini,” Prod. J. Desain Prod. (Pengetahuan dan Peranc. Produk), vol. 5, no. 2, pp. 67–74, 2022, doi: 10.24821/productum.v5i2.6917.
R. N. Natarajan, “Machine design,” Handb. Mach. Dyn., no. I, pp. 11–28, 2000, doi: 10.1038/042171a0.
D. W. Karmiadji and Z. S. Tampa, “PERANCANGAN MESIN PENGADUK PAKAN TERNAK BERKAPASITAS 75 kg MENGGUNAKAN SISTEM ARDUINO,” Poros, vol. 17, no. 2, pp. 89–99, 2021, doi: 10.24912/poros.v17i2.20037.
Choirul Anam, “Perencanaan Daya Dan Perhitungan Bantalan / Bearing Pada Mesin Pengupas Calculation on the,” J. Artic., vol. 1, no. 1, pp. 23–24, 2016, [Online]. Available: https://repository.its.ac.id/76196/1/2111030114-Non_Degree.pdf
T. Lazović and I. Topalović, “Evolution of rolling bearing life rating through the standardization,” vol. 225, no. 6, pp. 222–225, 2020.
M. F. Nurmajid, A. Pamungkas, and K. Kunci, “Perancangan Mesin Pengaduk Komposit Partikel Sistem Vakum Kapasitas 2 Liter,” Ind. Res. Work. Natl. Semin., p. 855, 2021, [Online]. Available: https://jurnal.polban.ac.id/ojs-3.1.2/proceeding/article/view/2809/2200
A. Sifa, T. Endramawan, I. Nurahman, and I. D. Pangga, “Rancang Bangun Mesin Pengaduk Dodol Karangampel,” Univ. Negeri Surabaya, pp. 26–27, 2020, [Online]. Available: https://jurnal.polban.ac.id/ojs-3.1.2/proceeding/article/view/1978/1547
F. Maghfurah and D. D. Chandra, “Perancangan Mesin Pengaduk Bahan Dasar Roti Kapasitas 43 Kg,” J. Ilm. Tek. Mesin, vol. 6, no. 1, pp. 46–60, 2012.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
