Design And Contruction of Circular Cardboard Paper Cutter for Piggy Bank MSMEs
Rancang Bangun Alat Pemotong Kertas Karton Bentuk Lingkaran pada UMKM Celengan
DOI:
https://doi.org/10.21070/ups.7512Keywords:
Manual cutting process, morphological chart, design concept, frame strength simulation, safety factorAbstract
This research aims to design a circular cardboard paper cutter with an electric motor drive as a solution for piggy bank MSMEs that replaces the manual cutting process. This initiative is driven by the need to meet the production needs of piggy banks in MSMEs. The morphological chart method is used to explore and produce various alternative design concepts. By combining the solutions of each element, various combinations of design concepts can then be produced. The results of the concept selection show that design A is a suitable choice for the needs of MSMEs. Meanwhile, the results of the frame strength simulation in the concept A design show a maximum von mises voltage of 5.433 Mpa, a maximum displacement of 0.041 mm, and a safety factor of 43 > 1, indicating that this design is safe to use.
Downloads
References
Putri Salsabila Indrawan Lubis and Rofila Salsabila, “Peran UMKM (Usaha Mikro, Kecil, Dan Menengah) Dalam Meningkatkan Pembangunan Ekonomi Di Indonesia,” MUQADDIMAH J. Ekon. Manajemen, Akunt. dan Bisnis, vol. 2, no. 2, pp. 91–110, 2024, doi: 10.59246/muqaddimah.v2i2.716.
S. Vinatra, A. Bisnis, U. Veteran, and J. Timur, “Peran Usaha Mikro, Kecil, dan Menengah (UMKM) dalam Kesejahteraan Perekonomian Negara dan Masyarakat,” J. Akuntan Publik, vol. 1, no. 3, pp. 1–08, 2023, doi: 10.59581/jap-widyakarya.v1i1.832.
D. Al Faruq, N. K. Sari, and R. Sandy, “Analisis Peranan UMKM dalam Meningkatkan Ekspor : Tinjauan Kajian,” no. 3, pp. 11–22, 2024.
Reniwati Lubis, Johni Eka Putra, Tri Widayati, Nurjanna Ladjin, and Adam Hafidz Al Fajar, “Peran dan Strategi UMKM dalam Mengurangi Tingkat Pengangguran di Indonesia,” El-Mal J. Kaji. Ekon. Bisnis Islam, vol. 5, no. 8, pp. 4082–4094, 2024, doi: 10.47467/elmal.v5i8.4611.
R. Himawan, R. A. Kelana, A. R. Ariani, and P. E. Widya, “Pengolahan Limbah Produksi Usaha Mikro, Kecil, dan Menengah Menjadi Kerajinan Kreatif,” Berdikari J. Inov. dan Penerapan Ipteks, vol. 10, no. 1, pp. 39–49, 2022, doi: 10.18196/berdikari.v10i1.10957.
M. Alfarizi and N. Ngatindriatun, “Kapabilitas Ekonomi Sirkular dalam Sektor UMKM Kota Surakarta Menuju Smart-Sustainable City,” Pus. Kaji. Penelit. dan Pengemb. Drh. Kota Surakarta, vol. 3, no. 1, pp. 1–16, 2024.
N. sel Wati and N. ning Latianingsih, “Riset Aksi: Daur Ulang Sampah Anorganik Plastik Sebagai Bentuk Usaha Baru Dan Dapat Mewujudan Masyarakat Peduli Sampah Anorganik Di Kota Depok,” EPIGRAM (e-journal), vol. 7, no. 1, pp. 57–67, 2014, doi: 10.32722/epi.v7i1.449.
@bolodewo7149 (2022, 5 September). experimen alat pemotong karton /kardus.. super cepat.. Diakses pada 1 Juli 2024, dari https://youtube.com/shorts/51C9u6qbvmc?feature=shared
A. Miftahuluddin, “Rancang Bangun Alat Sistem Keamanan Sensor Pada Rumah/Bangunan Dengan Menggunakan Metode Kansei Engineering Dan Morphological Chart,” Phys. Rev. E, vol. 66, no. July, p. 24, 2018.
M. A. R. Kusnadi and G. Giyanto, “Desain Kaca Depan Berbahan Acrylic Glass Mobil Listrik KTM GEN 1.0 Unpam,” J. Inov. Ilmu Pengetah. dan Teknol., vol. 3, no. 1, p. 17, 2022, doi: 10.32493/jiptek.v3i1.24707.
F. Bagus, A. Putra, and A. Choliq, “Analisis pulley dan V-Belt pada perancangan sistem transmisi wind tunnel bertenaga angin exhaus fan,” J. Mistek, vol. 3, no. 1, pp. 38–42, 2022.
Downloads
Additional Files
Posted
License
Copyright (c) 2025 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
