Analysis of Occupational Safety and Health (K3) Risks in the Concrete Production Process Using the JSA and Hirarc Methods at PT Varia Usaha Beton
Analisis Risiko Keselamatan dan Kesehatan Kerja (K3) Pada Proses Produksi Beton Dengan Metode JSA dan Hirarc di PT Varia Usaha beton
DOI:
https://doi.org/10.21070/ups.3929Keywords:
Occupational Health And Savety, Job Safety Analysis, Hazard Identification Risk Assessment Risk ControlAbstract
PT Varia Usaha Beton a company that produces ready mix concrete. Currently there are many employees who do not know the importance of K3 at work. The aim of this research is to analyze potential hazards in the ready mix concrete production process using the JSA method and the HIRARC method. The methods used are the Job Safety Analysis (JSA) method and the Hazard Identification Risk Assessment and Risk Control (HIRARC) method. The results of the research show that in the JSA method, on average, the potential danger is the presence of dust and causing air pollution, in addition to the environment with slippery ground so that many workers slip. Then the results of the HIRARC analysis are that there are activity processes that have a risk with a high level of 5, then a medium level value of 3. After that there are the highest levels, namely extreme, 2,
Downloads
References
I. Putri Salsabillah and A. Wasiur Rizqi, “Analisis Risiko dan Pengendalian K3 di Area Workshop pada Garasi Angkutan Luar PT. XYZ Menggunakan Metode Job Safety Analysis (JSA),” 2023.
K. I. Prasetyo, P. Pusporini, D. Andesta, ANALISIS RESIKO KECELAKAAN KERJA DENGAN PENERAPAN METODE HIRARC DI BAGIAN PRODUKSI PT. AUTOKORINDO PRATAMA GRESIK, JUSTI (Jurnal Sistem Dan Teknik Industri), vol. 3, no. 1, pp. 217-228, 2023.
A. R. Aditya, “ANALISA POTENSI BAHAYA KERJA SAAT LOADING BARANG BEKAS DI PT.XYZ MENGGUNAKAN METODE JSA DAN FMEA,” Journal of Industrial Engineering and Operation Management, vol. 6, no. 1, Jun. 2023.
T. A. F. K. Aprita and Ayudyah Eka Apsari, “ANALISIS RISIKO KECELAKAAN KERJA PADA BAGIAN STASIUN PENGGILINGAN DI PT SINERGI GULA NUSANTARA DENGAN METODE JSA DAN HIRARC,” Jurnal Ilmiah Teknik Mesin, Elektro dan Komputer, vol. 3, no. 2, pp. 180–191, Jul. 2023.
M. M. Rizki, A. W. Rizqi, and Y. P. Negoro, “Analisis Risiko Pelaksanaan Upgrade System Hidrant dengan Metode Job Safety Analysis (Studi Kasus: PT. Multi Pilar Mandiri),” vol. VIII, no. 2, 2023.
M. Nur, V. Valentino, R. K. Sari, and A. A. Karim, “Analisa Potensi Bahaya Kecelakaan Kerja Terhadap Pekerja Menggunakan Metode Hazard Identification, Risk Assement And Risk Control (HIRARC) Pada Perusahaan Aspal Beton,” Jurnal Teknologi dan Manajemen Industri Terapan (JTMIT), vol. 2, no. 3, pp. 150–158, 2023.
A. Nopiani, B. Yulianto, and M. Makomulamin, “Analisis Risiko Kecelakaan Kerja Dengan Metode Hazard Identification, Risk Assessment And Risk Control (HIRARC) Pada Kegiatan Pengelasan Di PT. Kunango Jantan Tahun 2020,” Media Kesmas (Public Health Media), vol. 1, no. 3, pp. 935–948, Dec. 2021.
B. H. Septiansyah and S. S. Dahda, “ANALISIS RISIKO BAHAYA KERJA KETINGGIAN MENGGUNAKAN METODE JOB SAFETY ANALYSIS (JSA) PADA BAGIAN PASANG BARU DI PT XYZ,” Journal of Industrial Engineering and Operation Management, vol. 6, no. 1, Jun. 2023.
W. Prasetya, I. Bagus Suardika, E. Adriatantri, and P. Studi Teknik Industri S-, “PADA INDUSTRI TAHU RDS,” Jurnal Mahasiswa Teknik Industri), vol. 6, no. 1, 2023.
A. A. Wahyudi1, E. D. Priyana2, and M. Jufriyanto3, “IDENTIFIKASI BAHAYA KERJA DENGAN METODE HAZARD IDENTIFICATION, RISK ASSESMENT AND RISK CONTROL (HIRARC) PADA BAGIAN PRODUKSI PT XYZ,” vol. 20, no. 1, pp. 413–420, 2022.
V. Monoarfa, R. Nur, and B. Miolo, “Mopolayio : Jurnal Pengabdian Ekonomi Penerapan Keselamatan dan Kesehatan Kerja (K3) Menggunakan Metode HIRARC Pada UMKM Pabrik Tahu”.
Riki Kurniawan and A. Eka Apsari, “ANALISIS POTENSI BAHAYA DAN RISIKO KECELAKAAN KERJA PADA BAGIAN PRODUKSI DENGAN METODE JOB SAFETY ANALYSIS DAN HAZARD IDENTIFICATION AND RISK ASSESMENT PADA PT XYZ,” Jurnal Ilmiah Teknik Mesin, Elektro dan Komputer, vol. 3, no. 2, pp. 341–348, Jul. 2023.
J. Porawouw, P. A. T. Kawatu, J. M. L. Umboh, F. Kesehatan, M. Universitas, and S. Ratulangi, “ANALISIS PELAKSANAAN METODE JOB SAFETY ANALYSIS (JSA) PADA BAGIAN MAINTENANCE MECHANICAL DI PT. MEARES SOPUTAN MINING (MSM) LIKUPANG,” 2020.
H. Mauliyani, N. Romdhona, M. Fauziah, P. Studi Kesehatan Masyarakat, and F. Kesehatan Masyarakat, “Environmental Occupational Health and Safety Journal IDENTIFIKASI RISIKO KESELAMATAN KERJA METODE (HIRARC) PADA TAHAP PEMBUATAN TANGKI DI PT. GEMALA SARANAUPAYA 1,” Environmental Occupational Health and Safety Journal •, vol. 2, no. 2, p. 163, 2022.
R. Ferry, D. Andesta, and A. Waiusr, “IDENTIFIKASI BAHAYA KECELAKAAN KERJA DI PT.TOSHIN PRIMA FINE BLANKING MENGGUNAKAN METODE JOB SAFETY ANALYSIS DAN HAZARD IDENTIFICATION, RISK ASSESMENT AND RISK CONTROL,” JUSTI, vol. 2, no. 2.
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
