DOI of the published article http://jurnal.utu.ac.id/joptimalisasi/article/view/8450
Work Posture Analysis at PT. The Gift of Eternal Harmony Using the CMDQ, OWAS and REBA Methods
Analisa Postur Kerja di PT. Karunia Selaras Abadi dengan Metode CMDQ, OWAS dan REBA
DOI:
https://doi.org/10.21070/ups.3822Keywords:
Flexible Packaging, work posture, CMDQ, OWAS, REBAAbstract
PT. Karunia Selaras Abadi is a flexible packaging company. The cylinder washing process is stressful for workers, thereby triggering fatigue which results in decreased productivity. Thus, workers are asked to fill out the CMDQ questionnaire which aims to determine the level of ergonomic risk. The body parts that workers often experience pain are the knee (left), shoulder (right) and lower back. Followed by an assessment of work posture using the OWAS method including the back, arms, legs and load, then completed with an assessment of work posture using the REBA method. There are 2 activities that have a high level of risk according to the OWAS method, washing cylinders using category 3 solvent, checking cylinders, category 3. For research on the REBA method, washing cylinders using solvents with a score of 8, checking cylinders with a score of 10, these results show that all activities require an improvement process.
Downloads
References
A. Sokhibi, “Perancangan Kursi Ergonomis Untuk Memperbaiki Posisi Kerja Pada Proses Packaging Jenang Kudus Akhmad Sokhibi Program Studi Teknik Industri , Fakultas Teknik , Universitas Muria Kudus Jl . Lingkar Utara Gondangmanis Bae Kudus Jawa Tengah 59327 Email : Akh.,” J. Rekayasa Sist. Ind., Vol. 3, No. 1, Pp. 61–72, 2017.
Abdurahman And E. B. Sulistiarini, “Studi Tentang Aspek Ergonomi Pada Pengetesan Dispersi Divisi Quality Control Di Pt. Xyz,” Conf. Innov. Appl. Sci. Technol., No. Ciastech, Pp. 347–354, 2019.
D. Emra, “Usulan Perbaikan Waktu Setup Press Roll Untuk Meningkatkan Output Mesin Printing Di Pt. Abc,” Baut Dan Manufaktur, Vol. 02, No. 1, Pp. 1–7, 2020.
Y. Hidjrawan And A. Sobari, “Analisis Postur Kerja Pada Stasiun Sterilizer Dengan Menggunakan Metode Owas Dan Reba,” J. Optim., Vol. 4, No. 1, Pp. 1–10, 2018.
D. Puspita, Suroto, And Kurniawan Bina, “Analisis Postur Kerja Terhadap Keluhan Musculoskeletal Disorders (Msds) Pada Pekerja Mekanik Bengkel Sepeda Motor X Semarang,” J. Kesehat. Masy., Vol. 5, No. 1, Pp. 1–8, 2017, [Online]. Available: Http://Ejournal3.Undip.Ac.Id/Index.Php/Jkm
T. P. Yosineba, E. Bahar, And M. R. Adnindya, “Risiko Ergonomi Dan Keluhan Musculoskeletal Disorders (Msds) Pada Pengrajin Tenun Di Palembang,” J. Kedokt. Dan Kesehat. Publ. Ilm. Fak. Kedokt. Univ. Sriwij., Vol. 7, No. 1, Pp. 60–66, 2020, Doi: 10.32539/Jkk.V7i1.10699.
A. Wicaksana And T. Rachman, Analisis Postur Kerja Dan Kelelahan Pada Pekerja, Vol. 3, No. 1. 2018. [Online]. Available: Https://Medium.Com/@Arifwicaksanaa/Pengertian-Use-Case-A7e576e1b6bf
S. Bastuti And M. Zulziar, “Analisis Postur Kerja Dengan Metode Owas (Ovako Working Posture Analysis System) Dan Qec (Quick Exposure Checklist) Untuk Mengurangi Terjadinya Kelelahan Musculoskeletal Disorders Di Pt. Truva Pasifik,” Jitmi (Jurnal Ilm. Tek. Dan Manaj. Ind., Vol. 2, No. 2, P. 116, 2020, Doi: 10.32493/Jitmi.V2i2.Y2019.P116-125.
F. Sulaiman And Purnama, “Analisis Postur Kerja Pekerja Proses Pengesahan Batu Akik Dengan Menggunakan Metode Reba,” J. Teknovasi, Vol. 03, No. 1, Pp. 16–25, 2016.
M. Andriani And E. Erfani, “Jisi : Jurnal Integrasi Sistem Industri Volume 4 No 2 Agustus 2017 Perancangan Ulang Egrek Yang Ergonomis Untuk Meningkatkan Produktivitas Pekerja Pada Saat Memanen Sawit,” Vol. 4, No. 2, Pp. 119–128, 2017, Doi: 10.24853/Jisi.4.1.Pp-Pp.
P. A. Pratiwi, D. Widyaningrum, And M. Jufriyanto, “Untuk Mengurangi Risiko Musculoskeletal Disorder,” Vol. 9, No. 2, Pp. 205–214, 2021.
T. Mardi And S. Perdana, “Analisis Postur Kerja Pada Pembuatan Rumah Boneka Dengan Metode Rapid Entire Body Assessment,” String (Satuan Tulisan Ris. Dan Inov. Teknol., Vol. 3, No. 2, P. 107, 2018, Doi: 10.30998/String.V3i2.2761.
H. Iridiastadi, Yassierli. “Ergonomi Suatu Pengantar”, Bandung: Pt. Remaja Rosdakarya. 2014
W. S. Kuswana, “Ergonomi Dan K3 Keselamatan Kesehatan Kerja”, Bandung: Pt. Remaja Rosdakarya. 2018
Tarwaka, “Ergonomi Industri Dasar Dasar Pengetahuan Ergonomi Dan Aplikasi Di Tempat Kerja”, Edisi 2, Surakart: Harapan Press. 2019
Downloads
Additional Files
Posted
License
Copyright (c) 2024 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
