DOI of the published preprint https://doi.org/10.61132/globe.v4i4.1784
Identification of Problematic Joints in 20 kV Distribution Networks Using Thermovision and Load-Current Analysis
Identifikasi Sambungan Bermasalah Pada Jaringan Distribusi 20kV Menggunakan Analisis Thermovision dan Arus Beban
DOI:
https://doi.org/10.21070/q1xzwe46Keywords:
Condition-Based Maintenance, Hotspot, Load Current, Problematic Joint, ThermovisionAbstract
Conductor joints in 20 kV distribution networks are critical points that develop thermal anomalies when contact quality deteriorates. This study aims to identify problemayic joints by integrating thermovision and load-current data and toestablish maintenance priorities. Field observations were conducted on three feeders of PT PLN (Persero) UP3 Pasuruan, namely Pesanggrahan, beji, and Suwayuwo, with 21 observations per feeder, and the data were analyzed descriptively. Thermal severety was classified using the class 0-3 EPRI/FLIR criteria. Maximum hotspot temperatures reached 78.1oC, 95.6oC, and 130o C, with maximum ΔT of 43.6oC, 51.8oC, and 75.7oC, respectively. Suwayuwo showed the most severe anomaly despite the lowest mean load current (156.0 A), indicating thaat joint-contact condition contributes to the thermal anomalies. Combining thermal and electrical indicators enables identifiction of joint severity and supports scheduled maintenance or immediate corrective action.
References
[1] S. M. Jhonson, S. Thamrin, and S. Johannes, “Analisis peningkatan kinerja jaringan distribusi 20 kV dengan metode thermovisi jaringan PT. PLN (Persero) ULP Medan Baru,” Jurnal Teknologi Energi UDA, vol. 9, no. 1, pp. 9–10, 2020. [Online]. Available: https://api.semanticscholar.org/CorpusID:225552310
[2] T. Sukmadi and B. Winardi, “Perhitungan dan analisis keseimbangan beban pada sistem distribusi 20 kV terhadap rugi-rugi daya (studi kasus pada PT. PLN UPJ Slawi),” Jurnal Teknik Elektro, vol. 11, pp. 47–52, 2009.
[3] Y. Hariswanda and I. Anshory, “Preventive maintenance as a key to reliable power distribution in Indonesia,” Procedia of Engineering and Life Science, vol. 7, pp. 658–664, 2024, doi: 10.21070/pels.v7i0.1536.
[4] J. T. Manalu, S. M. Panggabean, J. Napitupulu, J. Sinaga, and J. Jumari, “Analisa rugi-rugi daya pada saluran distribusi tegangan menengah 20 kV di PT. PLN (Persero) UP3 Sibolga,” Jurnal Teknologi Energi UDA: Jurnal Teknik Elektro, vol. 12, no. 1, p. 15, 2023, doi: 10.46930/jteu.v12i1.2843.
[5] R. W. Pratiwi and M. A. F. Haurissa, “Analisa rugi daya berbasis ETAP pada jaringan distribusi 20 kV Penyulang Ahuru,” Jurnal ELKO (Elektrikal dan Komputer), vol. 4, no. 1, pp. 328–337, 2023, doi: 10.54463/je.v4i1.84.
[6] I. S. Astuti and F. A. Silaban, “Analisa perbaikan jatuh tegangan dan rugi daya penyulang distribusi menggunakan ETAP,” Journal Cerita, vol. 11, no. 1, pp. 83–92, 2025, doi: 10.33050/cerita.v11i1.3371.
[7] I. Anshory, J. Jamaaluddin, and A. Wisaksono, Buku Ajar Dasar Konversi Energi, 2022, doi: 10.21070/2022/978-623-464-040-3.
[8] A. T. Mustari, S. Pranoto, and Tajuddin, “Analisis rugi-rugi daya akibat kerusakan jointing melalui hotspot thermovision pada PT. PLN (Persero) Unit Layanan Pelanggan Rantepao,” in Prosiding Seminar Nasional Teknik Elektro dan Informatika (SNTEI), Sept. 2021, pp. 93–97. [Online]. Available: http://118.98.121.208/index.php/sntei/article/view/2844
[9] J.-R. Riba, Á. Gómez-Pau, J. Martínez, and M. Moreno-Eguilaz, “On-line remaining useful life estimation of power connectors focused on predictive maintenance,” Sensors, vol. 21, no. 11, p. 3739, 2021, doi: 10.3390/s21113739.
[10] G. K. Balakrishnan et al., “A review of infrared thermography for condition-based monitoring in electrical energy: Applications and recommendations,” Energies, vol. 15, no. 16, p. 6000, 2022, doi: 10.3390/en15166000.
[11] E. K. Ukiwe, S. A. Adeshina, and J. Tsado, “Techniques of infrared thermography for condition monitoring of electrical power equipment,” J. Electr. Syst. Inf. Technol., vol. 10, no. 1, pp. 1–19, 2023, doi: 10.1186/s43067-023-00115-z.
[12] M. I. Malik, A. I. Rabbika, Y. Yanti, and R. Hadiputranto, “Fault detection analysis in electrical components using IR thermography: Applications and recommendations,” JTEIN: Jurnal Teknik Elektro Indonesia, vol. 6, no. 2, pp. 159–171, 2025, doi: 10.24036/jtein.v6i2.776.
[13] A. Multi, H. Mubarok, and Sugianto, “Analisis hotspot pada PMS Gardu Induk 150 kV Rawadenok Depok menggunakan metode thermovision,” Sainstech, vol. 32, no. 4, pp. 19–28, Dec. 2022, doi: 10.37277/stch.v32i4.1449.
[14] R. H. Siregar, M. R. Al-Faizi, M. Syukri, R. S. Lubis, and F. Fathurrahman, “Analisis penentuan titik hotspot dengan metode thermovisi pada Gardu Induk 150 kV Ulee Kareng,” KITEKTRO: Jurnal Komputer, Informasi Teknologi, dan Elektro, vol. 10, no. 1, pp. 27–33, 2025.
[15] O. M. Lambonan, A. A. Mokoagow, and S. J. Runtuwene, “Pengaruh pemeliharaan konektor jaringan tegangan menengah penyulang SA 1 terhadap keandalan penyaluran tenaga listrik,” Jurnal Elektrik, vol. 2, no. 1, pp. 33–41, Jun. 2023.
[16] S. F. Gurning and S. Sumpena, “Analisa perbaikan hotspot dalam keadaan bertegangan dan tidak bertegangan di PT. PLN (Persero) UPT Cawang,” Jurnal Teknologi Industri, vol. 13, no. 1, 2024, doi: 10.35968/jti.v13i1.1311.
[17] M. Is, T. Tarmizi, and R. Adriman, “Evaluation of PDKB performance’s impact on SAIDI SAIFI at PT. PLN UP3 Langsa,” Circuit: Jurnal Ilmiah Pendidikan Teknik Elektro, vol. 9, no. 1, pp. 123–134, 2025, doi: 10.22373/crc.v9i1.25467.
[18] A. S. Prasetyo, S. Syahrorini, R. Dilshod, H. Setiawan, and Z. Mamadiyarov, “IoT-based early warning system for transformer monitoring,” AIP Conference Proceedings, vol. 3374, no. 1, p. 50081, 2026, doi: 10.1063/5.0319154.
[19] M. A. Fudin, I. Sulistiyowati, and A. H. Falah, “IoT integrated electric car energy monitoring system: Case study of IMEI TEAM UMSIDA,” Jambura Journal of Electrical and Electronics Engineering, vol. 6, no. 2, pp. 189–195, 2024, doi: 10.37905/jjeee.v6i2.25198.
[20] A. Wisaksono, Y. Purwanti, N. Ariyanti, and M. Masruchin, “Design of monitoring and control of energy use in multi-storey buildings based on IoT,” JEEE-U (Journal of Electrical and Electronic Engineering-UMSIDA), vol. 4, no. 2, pp. 128–135, 2020, doi: 10.21070/jeeeu.v4i2.539.
[21] M. A. Azhar, S. Wilyanti, and A. O. Putri, “Pemantauan termal berbasis IoT untuk peringatan dini hotspot pada kubikel tegangan menengah (20 kV),” Electro Luceat, vol. 11, no. 2, pp. 37–46, 2025, doi: 10.32531/mpdzr473.
[22] S. Sahrani, N. D. Ahmad, R. Mohamed, M. A. Talib, and C. J. Kit, “Real-time monitoring of oil temperature in distribution power transformer by using Internet of Things,” Pertanika J. Sci. Technol., vol. 31, no. 1, pp. 1–16, 2023, doi: 10.47836/pjst.31.1.01.
[23] PT PLN (Persero), Keputusan Direksi PT PLN (Persero) Nomor 0520-2.K/DIR/2014 tentang Himpunan Buku Pedoman Pemeliharaan Peralatan Primer Gardu Induk. Jakarta, Indonesia: PT PLN (Persero), 2014.
[24] PT PLN (Persero), Buku 1: Kriteria Enjinering Konstruksi Jaringan Distribusi Tenaga Listrik. PT PLN (Persero), 2010, pp. 1–170.
[25] G. Zaputra, S. D. Ayuni, I. Anshory, and A. H. Falah, “Temporary Devider as an innovation tool in reducing operational losses of PT PLN (Persero) UP3 Sidoarjo,” Journal of Electrical Engineering and Computer (JEECOM), vol. 7, no. 1, pp. 77–84, 2025, doi: 10.33650/jeecom.v7i1.10810.
[26] N. Zhang, G. Zhao, L. Zou, S. Wang, and S. Ning, “Monitoring of transformer hotspot temperature using support vector regression combined with wireless mesh networks,” Energies, vol. 17, no. 24, p. 6266, 2024, doi: 10.3390/en17246266.
[27] A. Doolgindachbaporn, G. Callender, P. Lewin, E. Simonson, and G. Wilson, “Data driven transformer thermal model for condition monitoring,” IEEE Trans. Power Deliv., vol. 37, pp. 3133–3141, 2022, doi: 10.1109/TPWRD.2021.3123957.
[28] Y. Sun et al., “Hotspot temperature prediction of dry-type transformers based on particle filter optimization with support vector regression,” Symmetry, vol. 13, no. 8, p. 1320, 2021, doi: 10.3390/sym13081320.
[29] R. Duan, “Real-time hotspot tracing and model analysis of a distributed optical fiber sensor integrated power transformer,” IEEE Access, vol. 10, pp. 57242–57254, 2022, doi: 10.1109/ACCESS.2022.3177844.
[30] Y. Hao, Z. Zhang, X. Liu, Y. Yang, and J. Liu, “Inversion method for transformer winding hot spot temperature based on gated recurrent unit and self-attention and temperature lag,” Sensors, vol. 24, no. 14, p. 4734, 2024, doi: 10.3390/s24144734.
[31] A. Abdali, A. Abedi, H. Masoumkhani, K. Mazlumi, A. Rabiee, and J. M. Guerrero, “Magnetic-thermal analysis of distribution transformer: Validation via optical fiber sensors and thermography,” Int. J. Electr. Power Energy Syst., vol. 153, p. 109346, 2023, doi: 10.1016/j.ijepes.2023.109346.
[32] C. Gao, L. Huang, Y. Feng, E. Gao, Z. Yang, and K. Wang, “Thermal field modeling and characteristic analysis based on oil immersed transformer,” Front. Energy Res., vol. 11, p. 1147113, 2023, doi: 10.3389/fenrg.2023.1147113.
[33] Z. Janic, N. Gavrilov, and I. Roketinec, “Influence of cooling management to transformer efficiency and ageing,” Energies, vol. 16, no. 12, p. 4626, 2023, doi: 10.3390/en16124626.
[34] M.-G. Kim, S. Jeong, S.-T. Kim, and K.-Y. Oh, “Anomaly detection of underground transmission-line through multiscale mask DCNN and image strengthening,” Mathematics, vol. 11, no. 14, p. 3143, 2023, doi: 10.3390/math11143143.
[35] X. Yang et al., “Intelligent overheating fault diagnosis for overhead transmission line using semantic segmentation,” High Voltage, vol. 9, no. 2, pp. 309–318, Apr. 2024, doi: 10.1049/hve2.12403.
[36] M. Gou et al., “Research on defect diagnosis of transmission lines based on multi-strategy image processing and improved deep network,” Processes, vol. 12, no. 9, p. 1832, 2024, doi: 10.3390/pr12091832.
[37] Y. Wang and P. Sai, “Design and optimization of an intelligent monitoring system for overhead lines based on common information model,” IEEE Access, vol. 12, pp. 31386–31398, 2024, doi: 10.1109/ACCESS.2024.3368702.
Downloads
Additional Files
Posted
Categories
License
Copyright (c) 2026 UMSIDA Preprints Server

This work is licensed under a Creative Commons Attribution 4.0 International License.