Effect of Additives on Slurry Seal Setting Time
Pengaruh Additive Terhadap Time Setting Slurry Seal
DOI:
https://doi.org/10.21070/ups.12339Keywords:
slurry seal, asphalt emulsion, CQS-1h, additive, time setting, consistencyAbstract
Slurry seal is a pavement preservation method used to repair road surface damage using a mixture of fine aggregates, emulsified asphalt, water, filler, and additives. This study aims to compare the effects of Additive A and Additive B on slurry seal characteristics based on setting time and consistency parameters. The research was conducted using laboratory experiments at PT Triasindomix Sidoarjo, utilizing CQS-1h emulsified asphalt and three water content variations: 9%, 12%, and 15%. The results indicate that a water content of 12% yielded the optimal mixture condition. Consistency values were 2.00 cm for Additive A and 2.25 cm for Additive B; both met the 2–3 cm specification. The recorded setting times were 105 minutes 20 seconds for Additive A and 105 minutes 49 seconds for Additive B. A discrepancy exists between the numerical data and the narrative regarding which additive sets faster, necessitating data verification prior to publication.
Downloads
References
D. Cheng, R. E. Smith, S. G. Tan, M. Jaquiz, and C. M. Chang, “Developing Network Slurry Seal Performance Models Using Pavement Management Systems Data,” Transp. Res. Rec., 2022, doi: 10.1177/03611981221086935.
M. Ahmed and K. Hossain, “Recent Advances in Slurry Seal Technology,” Materials, 2023.
S. Kim, “Aggregate Effects on Slurry Seal Performance,” Sustainability, 2021.
I. D. M. A. Karyawan, M. Mahendra, B. Anshari, and E. Setiawan, “Konsistensi dan Setting Time Bubur Aspal Emulsi Menggunakan Filler Fly Ash dan Mastic Asbuton,” Siklus: Jurnal Teknik Sipil, 2023, doi: 10.31849/siklus.v9i2.16221.
H. Resesiyanto and R. Setyowati, “PENGARUH PENAMBAHAN ADITIF BERBAHAN DASAR GLUKOSA TERHADAP SETTING TIME DAN STRENGTH SEMEN PEMBORAN.”
M. Japar and A. Hamzah, “Evaluation of Slurry Seal Consistency,” Jurnal Teknik Sipil, 2023.
M. Calvindo, M. E. Muklim, and H. Sugiharto, “PENGGUNAAN ZAT ADITIF POLIMER PRODUK X SEBAGAI CAMPURAN IKATAN MORTAR.”
H. Suciati, “Analisis Stabilitas dan Konsistensi Campuran Aspal Slurry Seal dengan Penambahan Abu Ampas Tebu,” Sigma Teknika, 2024.
A. Karyawan, “Influence of Water Content on Slurry Seal,” Jurnal Transportasi, 2023.
D. Japar, “Model Penambahan Asbuton untuk Slurry Seal,” Scientica, 2023.
ISSA, Basic Asphalt Emulsion Manual. International Slurry Surfacing Association, 2010.
AASHTO, Standard Specifications for Transportation Materials and Methods of Sampling and Testing. AASHTO, 2017.
Y. Yao, “Breaking and Setting Characteristics of Asphalt Emulsion,” Journal of Materials in Civil Engineering, 2021.
T. Sita, “Slurry Seal: Teknologi Pada Preservasi Perkerasan Lentur,” Journal of Airport Engineering Technology, 2021, doi: 10.52989/jaet.v1i2.17.
S. Kim, “Aggregate Effects on Slurry Seal Performance,” Sustainability, 2021.
H. Wang, “Durability of Slurry Seal Systems,” Constr. Build. Mater., 2023.
Downloads
Additional Files
Posted
Categories
License
Copyright (c) 2026 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
