The Effect of Cement Filler on Cold Mix Mixtures on Marshall Stability
Pengaruh Filler Semen pada Campuran Coldmix Terhadap Marshall Stability
DOI:
https://doi.org/10.21070/ups.12338Keywords:
coldmix, aspalemulsi, fillersemen PCC, MarshallStability, Flow, Marshall QuotientAbstract
Coldmix is a pavement technology that can be produced and applied without heating. This study aims to analyze the effect of varying Portland Composite Cement (PCC) filler content on Marshall characteristics and to determine the optimal filler content. The research was conducted experimentally at the Road Laboratory of Universitas Muhammadiyah Sidoarjo using CQS-1h emulsified asphalt, dense-graded aggregates, and PCC filler at levels of 0%, 1%, and 2%. Marshall testing covered stability, flow, and Marshall Quotient (MQ). The results indicate that the 2% filler content yielded the best performance, with a stability of 1,734.15 kg (17.00 kN), flow of 2.12 mm, and MQ of 894.34 kg/mm. Stability increased by 39.04% compared to the mixture without filler. Based on the Marshall parameters examined, the use of 2% PCC filler provided the best combination of strength and resistance to deformation.
Downloads
References
H. F. Tambunan et al., “EFEKTIVITAS ASPAL EMULSI METODE CAMPURAN DINGIN PADA LAPISAN LASTON AC-BASE.”
A. Institute, Asphalt Emulsions Manual. Asphalt Institute, 2009.
P. Teknis Aspal Bakar Dan Aspal Emulsi Sebagai Bahan Pengikat Pada Campuran Perkerasan Jalan, “JURNAL KONSTRUKSI,” 2016.
I. S. S. Association, Basic Asphalt Emulsion Manual. ISSA, 2010.
R. Rahmatullah, A. R. Nurdin, and N. H. Yunianti, “Analisis Sifat Dan Karakteristik Campuran Hangat Aspal Emulsi Dengan Variasi Perendaman,” Jurnal Penelitian Teknik Sipil Konsolidasi, vol. 1, no. 2, pp. 131–136, May 2023, doi: 10.56326/jptsk.v1i2.3204.
“ANALISIS DAYA DUKUNG TANAH DAN BEBAN KENDARAAN TERHADAP KERUSAKAN PERKERASAN JALAN PADA RUAS JALAN RAYA METRO-TANJUNGKARI,” May 2020.
N. Prayogo, J. Christian Natakusuma, P. S. Wulandari, and H. Patmadjaja, “PENGARUH VARIASI GRADASI AGREGAT DARI BATAS BAWAH HINGGA BATAS TENGAH PADA CAMPURAN ASPAL EMULSI DINGIN.”
N. Puslitbang Jalan dan Jembatan, K. A. Pekerjaan Umun dan Perumahan Rakyat Jln Nasution No, K. Pos, and D. Hamdani Puslitbang Jalan dan Jembatan, “TEKNOLOGI TAMBALAN CEPAT MANTAP SEBAGAI SOLUSI CEPAT PENANGANAN KERUSAKAN JALAN BERLUBANG,” 2017.
A. H. Maulana and B. Damara, “Daya Tahan Coldmix Asphalt Sebagai Bahan Darurat Penanganan Jalan dengan Bahan Resin Fiberglass Sebagai Pengganti Aspal,” Jurnal Talenta Sipil, vol. 7, no. 1, p. 124, Feb. 2024, doi: 10.33087/talentasipil.v7i1.383.
A. I. Rifai, M. Hafidh, M. Isradi, and J. Prasetijo, “Analisis kinerja Cold Paving Hot Mix Asbuton dengan Filler Portland Cement terhadap intensitas rendaman,” vol. 28, no. 01, 2023.
S. Mulyana Jurnal Konstruksi Sekolah Tinggi Teknologi Garut Jl Mayor Syamsu No and J. Garut, “Karakteristik Campuran Aspal Emulsi Dingin Bergradasi Rapat Type III dan Type IV.” [Online]. Available: https://jurnal.itg.ac.id/
AASHTO, Standard Specifications for Transportation Materials and Methods of Sampling and Testing. AASHTO, 2017.
J. Pattimura et al., “DIREKTORAT JENDERAL BINA MARGA,” 1211.
I. Nyoman, A. Thanaya, I. Wayan, P. Jayantara, I. Gusti, and R. Purbanto, “Studi Karakteristik Campuran Tambalan Cepat Mantap (TCM),” 2020.
Y. M. Kim, K. Kim, and T. H. M. Le, “Development of Sustainable Cement Asphalt Mortar Using Agricultural Waste-Derived Bio-Oil and Latex–Acrylic Polymers for Enhanced Durability,” Polymers (Basel)., vol. 16, no. 22, Nov. 2024, doi: 10.3390/polym16223210.
“ANALISA TINGKAT KERUSAKAN JALAN MENGGUNAKAN METODE PCI UNTUK MENGEVALUASI KONDISI JALAN DI RAYA CANGKRING KECAMATAN KREMBUNG KABUPATEN SIDOARJO,” Nov. 2021.
Downloads
Additional Files
Posted
Categories
License
Copyright (c) 2026 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
