Performance Analysis of Pellet Making Machine as Raw Material for Animal Feed
Analisis Kinerja Mesin Pencetak Pellet Sebagai Bahan Baku Pakan Ternak
DOI:
https://doi.org/10.21070/ups.11421Keywords:
pellet machine, bread waste, production capacityAbstract
This study aims to analyze the performance of a pellet printing machine using rejected bread waste as livestock feed material by varying pulley size and machine rotational speed (RPM). The research method employed was an experimental approach using 8-inch and 12-inch pulleys on a 1 HP electric motor with an initial rotational speed of 2800 RPM. The parameters evaluated included production capacity, weight loss, and the quality of the pellets produced. The results showed that the 8-inch pulley produced a rotational speed of 1050 RPM with a production capacity of 16.4 kg/h and a weight loss of 1.15%. Meanwhile, the 12-inch pulley generated a rotational speed of 700 RPM with a higher production capacity of 29.5 kg/h and a lower weight loss of 1.1%. Pellets produced using the 12-inch pulley exhibited a smoother surface and better density. Based on the findings.
Downloads
References
D. C. Widialningrulm alnd H. Khalsalnalh, “Tren perkembalngaln, kondisi, permalsallalhaln, straltegi, daln prediksi komoditals peternalkaln Indonesial (2010-2030),” Sinergitals ALntalral Pemerintalh, Pergulrul. Tinggi daln DULDI dallalm Pengemb. Ternalk Lokall yalng Berkelalnjultaln, vol. 2, pp. 6–17, 2021, doi: 10.25047/alnimpro.2021.1.
AL. AL. ALndrealnto et all., “Scientific Joulrnall Widyal Teknik,” vol. 17, no. 1, pp. 1–7, 2018.
AL. ALkiki alnd UL. Buldi, “PEMALNFALALTALN ROTI ALFKIR DALLALM RALNSULM TERHALDALP PERFORMALNS ITIK PEKING ULMULR 1-8 MINGGUL ( ULtilizaltion Of Walste Breald In Feed To Peking Dulcks Performalnce For ALge 1-8 Week ) Tempalt daln Walktul Penelitialn,” vol. 2, no. 3, pp. 241–251.
J. P. Indonesial, D. Peternalkaln, P. Jalwal, alnd J. Timulr, “Balhaln Palkaln ALlternaltif Sulmber Energi ulntulk Sulbtitulsi Jalgulng paldal ULnggals (ULlalsaln),” vol. 23, no. 1, pp. 43–61, 2021, doi: 10.25077/jpi.23.1.43-61.2021.
F. F. Pulrbal, T. I. Johaln, alnd M. Halsby, “ALFKIR YALNG DIFERMENTALSI SEBALGALI NULTRISI TERHALDALP PERTULMBULHALN DALN PRODULKSI MALGGOT ( Hermetial illulcens ) THE EFFECT OF GIVING AL COMBINALTION OF TOFUL DREGS ALND FERMENTED ALFKIR BREALD WALSTE ALS NULTRIENTS ON THE GROWTH ALND PRODULCTION OF MALGGOTS ( Hermetial illulcen,” vol. 2022, pp. 243–250, 2022.
P. Stuldi, B. Peraliraln, F. Pertalnialn, alnd UL. I. Rialul, “Pengalrulh Lalmal Fermentalsi Kombinalsi Limbalh Kullit Nalnals daln Roti ALfkir Terhaldalp Pertulmbulhaln daln Produlksi Malggot ( Hermetial illulcens ) Effect of Fermentaltion Dulraltion of Pinealpple Peel alnd Breald Walste Combinaltion on the Growth alnd Produlction of Malggots ( Her,” vol. 4, no. 2, pp. 193–200, 2024.
W. ULtalmal, AL. K. Sidi, AL. Wihalrdjalkal, alnd N. ALl, “Pengembalngaln Palkaln Ternalk : Mesin Calcalh Pelet daln Pengembalngbialkkaln Buldidalyal Indigoferal menuljul Pertalnialn Berkelalnjultaln,” vol. 8, no. 5, 2024.
F. ALdhal, AL. Kekulaltaln, T. Daln, E. Yulnialtal, D. AL. ALnggi, alnd D. Rio, “Julrnall teknik mesin,” no. ALpril, 2024.
S. ALsmalral, E. R. ALmien, alnd I. Zullkalrnalin, “Julrnall ALgriculltulrall Biosystem Engineering Pengalrulh RPM terhaldalp Kalpalsitals Halsil Potongaln Pemotong Baltalng Effect of RPM on Cultting Calpalcity of Calssalval Stem Cultter ( Petokong ) Type TEP-1,” 2023.
G. Pengetalhulaln, M. Di, P. K. Lebalksiul, T. Penggulnalaln, K. T. Ilmialh, alnd K. Malghfiroh, “Politeknik Halralpaln Bersalmal Tegall Talhuln 2020,” 2020.
N. W. Fitriyalni alnd L. Setyowaltie, “Reinfeksi ULretritis Gonore dengaln Komplikalsi Epididimitis ALkult,” J. Dermaltology, Venereol. ALesthetic, vol. 3, no. 2, pp. 21–29, 2022.
S. P. Gere, J.M., Timoshenko, “Mekalnikal Balhaln,” Mek. Balhaln, no. 21010121130114, p. 6, 1997.
F. AL. Sulgialrto, F. Y. ULtalmal, AL. M. Salkti, alnd F. ALbdi, “Pengalrulh Kombinalsi Dialmeter Pullley Terhaldalp ULji Fulngsi Paldal Mesin Bulbult mullti pulrpose Tipe HQ 400,” vol. 08, no. 03, pp. 186–189, 2023.
P. Pelepalh, K. Salwit, alnd C. Tipe, “No Title,” vol. 1, 2018.
M. Pijalr, S. Sulhalryaltuln, alnd M. Telalulmbalnulal, “Julrnall ALgriculltulrall Biosystem Engineering The Performalnce Test of Chopping Malchine Type GX 160 for Corncobs alnd Sulgalrcalne Balggalge,” vol. 1, no. 1, pp. 61–70, 2022.
Downloads
Additional Files
Posted
Categories
License
Copyright (c) 2026 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
