Occupational Safety And Health (K3) Risk Analysis In The Travo Tank Production Process Using The JSA And HIRARC Methods
Analisis Risiko Keselamatan Dan Kesehatan Kerja (K3) Pada Proses Produksi Tangki Trafo Dengan Metode JSA Dan HIRARC
DOI:
https://doi.org/10.21070/ups.11075Keywords:
Occupational Safety and Health (OHS), Method Job Safety Analysis (JSA), Method Hazard Identification Risk Assessment Risk Contol (HIRARC)Abstract
PT XYZ is a company engaged in transformer manufacturing, with transformer tanks as one of its main components. The problem faced by the company is that many employees still lack understanding of the importance of implementing Occupational Safety and Health (OSH) in the workplace. This condition led to a 25% increase in workplace accidents during the 2021–2022 period, accompanied by various accident risks in both the production process and work environment. This study aims to analyze potential hazards in the transformer tank production process using the Job Safety Analysis (JSA) and Hazard Identification, Risk Assessment, and Risk Control (HIRARC) methods. The analysis results indicate that the dominant hazards originate from sharp and heavy materials that may cause scratches, bruises, and injuries due to the use of tools and machinery. The HIRARC analysis identified four medium-risk activities, two
high-risk activities, and one extreme-risk activity in the welding process.
Downloads
References
M. Salsabillah, Hidayat, and A. W. Rizqi, “Analisis Risiko Dan Upaya Pengendalian K3 Di Area Workshop Bagian Pengelasan Pada Garasi Angkutan Luar Pt . Xyz Dengan Metode Job Safety Analys (Jsa),” vol. 4, no. 2, 2023.
R. David, P. B. Isma, S. R. Amriddinova, J. Muhammad, and O. Ika, “Risk Assessment of Manual Material Handling in Aluminium Productin,” Annu. Conf. Sci. Technol. Res., vol. 3337, no. 1, 2022.
Y. Yunita, A. Ekayuliana, and F. Wijayanti, “Identification Of Potential Hazards Using The Hazard Identification Risk Assessment And Risk Control (HIRARC) Method, Case Study: PT. X Dentifikasi Potensi Bahaya Menggunakan Metode Hazard Identification Risk Assessment And Risk Control (HIRARC), Studi Ka,” vol. 6, no. 6, p. 2024, 2024.
Muhammad Zulfi Ikhsan, “Identifikasi Bahaya, Risiko Kecelakaan Kerja Dan Usulan Perbaikan Menggunakan Metode Job Safety Analysis (Jsa) (Studi Kasus: PT. Tamora Agro Lestari),” J. Teknol. dan Manaj. Ind. Terap., vol. 1, no. I, 2022.
A. Fathur Rohman and B. Isma Putra, “Analisis Risiko Keselamatan dan Kesehatan Kerja (K3) PadaProses Produksi Beton Dengan Metode JSA dan HIRARC di PTVaria Usaha Beton,” MATRIK J. Manaj. dan Tek. Ind., vol. XXVI, no. 1, pp. 209–224, 2024, doi: 10.350587/Matrik.
Trisaid Siti Nurlelyza, “Analisis Risiko Kecelakaan Kerja Pada Kegiatan Rig ServiceMenggunakan Metode Hirarc Dengan Pendekatan Fta,” J. Ilm. Tek. Ind., vol. 8, no. 1, pp. 25–33, 2020.
L. Willy Afredo, “Analisis Resiko Kecelakaan Kerja di CV. Jati Jepara Furniture dengan Metode HIRARC (Hazard Identification Risk Assessment and Risk Control),” J. Ilm. Tek. Ind. Prima (JURITI PRIMA), vol. 4, no. 2, 2021, doi: 10.34012/juritiprima.v4i2.1816.
B. Stevana and Y. Ferida, “Analisis Pengendalian Risiko Kecelakaan Kerja Bagian Mekanik Pada Proyek Pltu Ampana (2x3 Mw) Menggunakan Metode Job Safety Analysis (JSA) Stevana,” J. Rekayasa Proses dan Ind. Terap., vol. 1, no. 1, pp. 61–69, 2022, doi: 10.59061/repit.v3i2.1042.
Y. Ilmansyah, N. A. Mahbubah, and D. Widyaningrum, “Penyebab dan Pengendalian Kecelakaan Kerja pada Proyek Pembangunan Konstruksi Gudang Pabrik. In Prosiding Seminar Nasional Sains dan Teknologi Terapan (Vol. 9, No. 1, pp. 161-167).,” Profisiensi, vol. 8, no. 1, pp. 15–22, 2021.
K. R. Ririh, “Analisis Risiko Kecelakaan Kerja Menggunakan Metode HIRARC dan Diagram Fishbone pada Lantai Produksi PT DRA Component Persada,” Go-Integratif J. Tek. Sist. dan Ind., vol. 2, no. 2, pp. 135–152, 2021, doi: 10.35261/gijtsi.v2i2.5658.
M. Nur, V. Valentino, R. K. Sari, and A. A. Karim, “Analisa Potensi Bahaya Kecelakaan Kerja Terhadap Pekerja Menggunakan Metode Hazard Identification , Risk Assement And Risk Control ( HIRARC ) Pada Perusahaan Aspal Beton,” vol. 2, 2023.
P. Sabda, fahlevi iqbal Muhammad, N. Danvil, Yarnaliza, and F. Eva, “Manajemen Risiko dengan Menggunakan Metode HIRARC di Stasiun Kamar Asap, Pabrik Pengolahan Karet, PTPN III Kebun Bandar Betsy,” J. Kesehat. Ilm. Indones., vol. 9, no. 2, 2024.
D. O. Santoso, M. D. Kurniawan, and H. Hidayat, “Analisa Risiko Keselamatan dan Kesehatan Kerja Menggunakan Metode HIRARC di PT. INHUTANI 1 UMI GRESIKHUTANI 1 UMI GRESIK,” J. Media Tek. dan Sist. Ind., vol. 6, no. 1, p. 12, 2022, doi: 10.35194/jmtsi.v6i1.1580.
A. A. Wahyudi, E. D. Priyana, and M. Jufriyanto, “Identifikasi Bahaya Kerja Dengan Metode Hazard Identification , Risk Assesment and Risk Control (HIRARC) Pada Bagian Produksi Pt XYZ,” SITEKIN J. Sains, Teknol. dan Ind., vol. 20, no. 1, pp. 413–420, 2022.
R. Wardhana and Lukmandono, “Design Cost Control in Risk Management with the Expected Money Value (Emv) and Hirarc Method at Pt Xyz Jawa Timur Surabaya,” PROZIMA (Productivity, Optim. Manuf. Syst. Eng., vol. 4, no. 1, pp. 12–22, 2021, doi: 10.21070/prozima.v4i1.1276.
Downloads
Additional Files
Posted
Categories
License
Copyright (c) 2026 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
