Design and Construction of a Livestock Feed Pellet Printing Machine
Rancang bangun pembuatan mesin cetak pelet pakan ternak
DOI:
https://doi.org/10.21070/ups.11069Keywords:
Extruder, FEA, SolidWorks, pellet machine, screw extruder, , machine frame, finite element analysisAbstract
A livestock feed pellet machine is a device designed to improve the efficiency of animal feed production processes. ManualFeed production generally requires a longer processing time and often produces pellets with non-uniform sizes. This study aims to design and develop a livestock feed pellet machine with a production capacity of 20 kg/h, focusing on the structural design of the machine frame and screw extruder as the primary components in the pellet-forming process. The research methodology includes field observation, literature review, and a design process based on the VDI 2222 design method. The design process was carried out using SolidWorks software, involving the selection of main components such as an AC electric motor, pulley and V-belt transmission system, hopper, machine frame, and screw extruder. Structural strength analysis was conducted using the Finite Element Analysis (FEA) method through SolidWorks Simulation.
Downloads
References
M. D. Prayoga And H. Herlina, “Perancangan Alat Cetak Pelet Ayam Portabel Guna Mengurangi Biaya Pembelian Pakan (Studi Kasus: Peternakan Pak Musraji),” J. Tek. Ind. Terintegrasi, Vol. 7, No. 2, Pp. 877–887, 2024, Doi: 10.31004/Jutin.V7i2.27748.
Y. Yatno, S. Suparjo, And R. Murni, “Isolasi Protein Dan Produksi Konsentrat Protein Daun (Kpd) Sebagai Suplemen Pakan Ternak,” Pastura, Vol. 7, No. 2, P. 88, 2019, Doi: 10.24843/Pastura.2018.V07.I02.P07.
M. D. R. Aji, I | Page, Vol. 1, No. May. 2017.
S. E. Lina, “Perancangan Mesin Cetak Pelet Berbasis Teknologi Hybrid,” 2024, [Online]. Available: Https://Repositori.Uma.Ac.Id/Jspui/Bitstream/123456789/24343/1/188120029 - Sonia Ester Lina Fulltext.Pdf
Pemanfaatan Limbah Pasar Sebagai Pakan Ruminansiasapi Dan Kambing Di Dki Jakarta Drh . Neng Risris Sudolar.
S. P. Collins Et Al., “Pemberian Pakan Dengan Energi Yang Berbeda Terhadap Pertumbuhan Benih Ikan Kerapu Tikus (Cromileptes Altivelis),” Vol. 1, No. 2, Pp. 167–186, 2021.
D. T. J. Drotman, “Design Of A Screw Extruder For Additive Manufacturing,” P. 57, 2015.
R. Bamban Jakaria, I. Iswanto, E. Widodo, And P. Amelia Kusumawardani, Persepktif Desain Produk : Merancang Atribut Produk.Pdf. 2024.
P. Kroes, Engineering Design. 2009. Doi: 10.1002/9781444310795.Ch19.
K. Silak, J. Haurissa, And M. Mini, “Analysis Of The Impact Of Different Water Volumes In The Mixture Of Charcoal And Tapioca Flour On The Combustion Rate Of Biomass Briquettes The Purpose Of This Study Is To Analyze The Effect Of Varying Water Volumes In The Mixture Of Areca Palm,” Vol. 18, No. November, 2025.
J. Nugroho, F. Sains, D. A. N. Teknologi, I. Negeri, S. Syarif, And K. Riau, “Perancangan Alat Perakitan Pallet Ergonomis Menggunakan Metode Verein Deutcher Ingenieure ( Vdi ),” Vol. 2222, No. Vdi, 2020.
A. B. Maulana, E. Widodo, A. Fahruddin, And S. Yulianto, “Design Of A Single Screw Extruder Machine For 3d Printing Filament Production Application,” Sintek J. J. Ilm. Tek. Mesin, Vol. 17, No. 1, P. 24, 2023, Doi: 10.24853/Sintek.17.1.24-30.
T. A. Kristiawan, A. Dhimas, P. Yanuar, And T. Setiyawan, “Analisa Penggunaan Support Frame Lama Pada Desain Baru Screw Conveyor Machine Menggunakan Metode Elemen Hingga,” Vol. 6, No. 1, Pp. 35–46, 2023.
A. R. Prasetyo, Sulis Yulianto, And Edi Widodo, “Rancangan Prototipe Mesin Pengering Gabah Berbasis Teknologi Hybrid,” J. Konversi Energi Dan Manufaktur, Vol. 9, Pp. 32–42, 2023, Doi: 10.21009/Jkem.9.1.4.
L. Hernando And N. Fajrah, Optimalisasi Sistem Kerja Manusia-Mesin Di Era.
D. Kurnia, A. Firizky, N. R. Wibowo, And R. Pratindy, “Structural Evaluation Of The Textile Machine Monitoring System Support Frame Using The Finite Element Method,” Vol. 13, No. 1, Pp. 170–176, 2026, Doi: 10.37373/Tekno.V13i1.1988.
A. Lawi Et Al., Ergonomi Industri.
P. Studi, P. Teknik, F. Universitas, And S. Maret, “Tinjauan Prinsip-Prinsip Ergonomi Dalam Perbaikan Sarana Pembelajaran Di Prodi Pendidikan Teknik Mesin Uns,” Vol. 5, No. 1, Pp. 87–92, 2006.
N. Nazaruddin, “Design And Manufacture Of A Fish Pellet Machine With A Screw Extruder Method Capacity Of Batter 2 . 35 Tons / Hour”.
0073380288, “Mechanics Of Materials – Beer & Johnston – 6th Edition.”
J. K. N. Richard G. Budynas, “Shigley’s Mechanical Engineering Design, 11th Edition, Si Units.”
S. Suryady And A. D. Sapto, “Analisis Pembebanan Statis Terhadap Rangka Mesin Alat Pengaduk Untuk Adonan Donat Menggunakan Sofware Fea Jurnal Teknik Mesin : Vol . 13 , No . 1 , Februari 2024 Issn 2549-2888,” Vol. 13, No. 1, Pp. 22–29, 2024.
Hibbeler, “Mechanics,” Https://Www.Researchgate.Net/Publication/262156788_Mechanics_Of_Materials.
O. M. E. S. Khayal, “لولأا ء زجلا Mechanics Of Materials Part One,” 2019.
J. P. D. Editor, Introduction To Mechanical Engineering.
P. Studi, T. Mesin, And U. M. Sidoarjo, “Penggunaan Metode Vdi 2222 Sebagai Dasar Perancangan Mesin Pencacah Sampah Plastik,” 2025.
R. Adhiharto, A. B. Nusantoro, A. I. Komara, And D. H. Wigenaputra, “Perancangan Ulang Dan Analisa Mesin Benchtop Injection Molding Dengan Metode Vdi 2222,” Vol. 5, No. 2, Pp. 153–168, 2023.
P. Sarda, A. Manjare, G. Raut, And P. Baskar, “Stress Optimization Of Frame With Reinforcement Technique By Fea,” Vol. 3, No. 5, Pp. 836–840, 2014.
I. P. Aondona, “Design And Production Of A Single Screw Fish Feed Extruder,” Vol. 1, No. 1, Pp. 9–35, 2024.
A. P. Olalusi, S. A. Olaoye, J. Isa, A. S. Oyerinde, C. Ayo-Olalusi, And D. O. Adesuyi, “Development And Performance Evaluation Of A Single Screw Extruder For The Production Of Floating Fish Feed,” Vol. 23, No. 12, Pp. 48–58, 2022, Doi: 10.9734/Jerr/2022/V23i12762.
D. Vries, Manufacturable Design Operations, Vol. 1, No. 1996. 2026. Doi: 10.6100/Ir461105.
A. Pratama, “Desain Dan Analisis Kekuatan Rangka Mesin Pres Batako Menggunakan Finite Element Method Design And Strength Analysis Of Brick Press Machine Frame Using Finite Element Method,” Vol. 5, Pp. 221–230, 2023.
S. O. Dapas, “Analisis Struktur Rangka Batang,” Vol. 1, No. 2, Pp. 156–160, 2011.
D. Chakraborty, B. A. Reddy, And A. R. Choudhury, “Extruder Path Generation For Curved Layer Fused Deposition Modeling,” Vol. 40, Pp. 235–243, 2008, Doi: 10.1016/J.Cad.2007.10.014.
D. Straub, “Stabilization Of Filament Production Rate For Screw Extrusion-Based Polymer Three-,” Vol. 142, No. March, Pp. 1–10, 2020, Doi: 10.1115/1.4045560.
“Influence Of Extrusion Conditions On Extrusion Speed, Temperature, And Pressure In The Extruder And On Pasta Quality J. Abecassis, R. Abbou, M. Chaurand, M.-H. Morel, P. Vernoux.”
E. Unlu And J. F. Faller, “Formation Of Resistant Starch By A Twin-Screw Extruder,” No. C, Pp. 346–350, 1998.
C. Clason, “Introduction To Finite Element Methods”.
C. Learning, A. R. Reserved, And C. Learning, Afirst Course In The Finite Element Method, Fifth Edition Daryl L. Logan.
N. Simuiation And P. Extruder, “Numerical Simuiation . ’ , . .... . . .. . Of A Single Sclffi’l Plasticatinj Extruder Id Eric Agur, B.A.Sc .. , M.Eng.,” 1982.
M. Sibarani, M. P. Allan, And P. M. Santika, “Perancangan Unit Extruder Pada Mesin Extrusion Lamination Flexible Packaging,” Vol. 2, No. 2, Pp. 42–45, 2018.
Downloads
Additional Files
Posted
Categories
License
Copyright (c) 2026 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
