Analysis of Quality Control and Quality of Syringe Packaging (Injection) Using the Six Sigma Method
Analisis Pengendalian Mutu dan Kualitas Kemasan Syringe (Injeksi) Menggunakan Metode Six Sigma
DOI:
https://doi.org/10.21070/ups.10665Keywords:
Syringe Packaging, Quality Control, Defect, Six SigmaAbstract
PT. XYZ is the first biopharmaceutical factory in Indonesia with biosimilar and biological products from raw materials to finished products. The purpose of the study is to identify aspects that cause the largest defective products in the production stage of PT. XYZ and provide improvements regarding quality control and quality using the Six Sigma (DMAIC) method. Based on the calculation of DPMO, the sigma level of PT. XYZ is still good because it is known that the DPMO value is 396.7, meaning that one million productions have 396.7 defective products with a sigma value of 4, where the sigma value of PT. XYZ is very good at the top level of Indonesian companies because the average sigma value of companies in Indonesia is 3.03 to 3.61.
Downloads
References
Wirawati, Sri Mukti. "Analisis pengendalian kualitas kemasan botol plastik dengan metode Statistical Process Control (SPC) di PT. Sinar Sosro KPB Pandeglang." Jurnal Intent: Jurnal Industri dan Teknologi Terpadu 2.1 (2019): 94-102
Assauri, Sofyan. "Manajemen Pemasaran. dasar-Dasar, Konsep, Strategi, Penerbit CV." (1998).
Priyambodo, Bambang. "Manajemen Farmasi Industri." Global Pustaka Utama, Yogyakarta 116 (2007): 190-191.
Somadi, Somadi. "Evaluasi keterlambatan pengiriman barang dengan menggunakan metode Six Sigma." Jurnal Logistik Indonesia, Vol. 4, No. 2, 2020, Hal. 81-93
E. Krisnaningsih, P. Gautama, dan M. F. K. Syams, “Usulan Perbaikan Kualitas dengan Menggunakan Metode FTA dan FMEA,” Jurnal InTent, vol. 4, no. 1, pp. 41– 54, 2021.
Ratnadi dan E. Suprianto, “Pengendalian Kualitas Produksi Menggunakan Alat Bantu Statistik (Seven Tools) dalam Upaya Menekan Tingkat Kerusakan Produk,” Jurnal INDEPT, vol. 6, no. 2, pp. 10–18, 2016.
Wahyuni, Hana Catur, and Setiawan Setiawan. "Implementasi Metode Objective Matrix (OMAX) Untuk Pengukuran Produktivitas Pada PT. ABC." PROZIMA (Productivity, Optimization and Manufacturing System Engineering), Vol. 1, No. 1, 2017, Hal. 17-21.
Cahyana, Atikha Sidhi, Udi Subakti C, and Bustanul Arifin Noer. "Pengembangan Model Kinerja Lingkungan Bagi Industri Kecil dan Menengah (IKM) dengan Pendekatan Structural Equation Modeling (SEM).", Simposium Nasional RAPI XI FT UMS, 2012.
Fithri, Prima. "Six Sigma Sebagai Alat Pengendalian Mutu Pada Hasil Produksi Kain Mentah PT Unitex, Tbk." J@ti Undip: Jurnal Teknik Industri, Vol. 14, No. 1, 2019, Hal. 43-52.
Ahmad, Fandi. "Six Sigma dmaic sebagai metode pengendalian kualitas produk kursi pada ukm." JISI: Jurnal Integrasi Sistem Industri, Vol. 6, No. 1, 2019, Hal. 11-17.
Gaspersz, “Pedoman implementasi program six sigma terintegrasi dengan ISO 9001: 2000, MBNQA, dan HACCP,” PT. Gramedia Pustaka Utama, Jakarta, 2002.
Yuswandi, Dhedy, and Anindya Rachma Dwicahyani. "Pengendalian Kualitas Produk Cacat Hollow Alumunium Menggunakan Metode Six Sigma dengan Tahapan DMAIC (Studi Kasus di PT. XYZ Surabaya)." Prosiding SENASTITAN: Seminar Nasional Teknologi Industri Berkelanjutan. Vol. 1. No. 1. 2021.
Utomo, Yitno, Muhamad Abdul Jumali, and Diva Nalurita Salsabila. "ANALISIS CRITICAL TO QUALITY (CTQ) PADA PERCETAKAN KORAN DI PT TEMPRINA MEDIA GRAFIKA (JAWA POS GROUP)." WAKTU: Jurnal Teknik UNIPA, Vol. 20, No. 02, 2022, Hal. 103-109.
Al Faritsy, Ari Zaqi, and Angga Suluh Wahyunoto. "Analisis Pengendalian Kualitas Produk Meja Menggunakan Metode Six Sigma Pada PT XYZ." Jurnal Rekayasa Industri (JRI) 4.2 (2022): 52-62.
Solihin, Muhammad Faris, Agus Alex Yanuar, and Judi Alhilman. "Application Of Reliability Centered Maintenance (RCM) For Defect Of Newspaper Printing Minimization By Six Sigma Approach." eProceedings of Engineering, Vol. 5, No. 2, 2018, Hal. 2567.
Kurnia, Reza Fitra, Aan Zainal Muttaqin, and Halwa Annisa Khoiri. "ANALISIS PENGENDALIAN KUALITAS PADA MF-1 PRODUKSI SARUNG TANGAN GOLF PT ADI SATRIA ABADI YOGYAKARTA DENGAN MENGGUNAKAN METODE DMAIC." Scientica: Jurnal Ilmiah Sains dan Teknologi, Vol. 1, No. 1, 2023, Hal. 69-81.
Gaspersz, Vincent. Total Quality Management. Gramedia Pustaka Utama, Jakarta. 2001.
Guritno, Juli, and Atikha Sidhi Cahyana. "Implementation of Autonomous Maintenance in Total Productive Maintenance." Procedia of Engineering and Life Science, Vol. 1, No. 2, 2021.
Downloads
Additional Files
Posted
License
Copyright (c) 2026 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
